« previous next »
Pages: [1]   Go Down

Author Topic: cb 550 dilemma  (Read 3808 times)

0 Members and 4 Guests are viewing this topic.

Offline anthony

  • Full Member
  • *
  • Posts: 63
  • ebay and i have a love hate relationship
cb 550 dilemma
« on: March 25, 2011, 04:48:06 PM »
last year i road over 4000 miles with little cross hatch in the cylinders and a oil leak at the head gasket in the middle due to not enough cleaning on my part. now that i have to do the top end for the second time i will get the cylinders honed and get new rings. what problems have come up in this kind of rebuild. this bike has 48000 miles on original rings.











i did clean the carbon off with a/c delco combustion cleaner.
Logged

Offline anthony

  • Full Member
  • *
  • Posts: 63
  • ebay and i have a love hate relationship
Re: cb 550 dilemma
« Reply #1 on: March 26, 2011, 04:34:04 AM »
does any one think i can get away with using the original pistons and getting standard rings. i am trying to do this for as cheep as i can.
Logged

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,238
  • Central Texas
Re: cb 550 dilemma
« Reply #2 on: March 26, 2011, 06:19:23 AM »
Did you check your compression before you pulled it apart?
If it was good, it is possible to use standard rings.
How was it running?
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline fmctm1sw

  • Old Timer
  • ******
  • Posts: 3,042
Re: cb 550 dilemma
« Reply #3 on: March 26, 2011, 07:10:53 AM »
Quote from: Stev-o on March 26, 2011, 06:19:23 AM
Did you check your compression before you pulled it apart?
If it was good, it is possible to use standard rings.
How was it running?

+1.  I had a 400F with 40000+ on it that didn't need bored.  Take it to a machine shop and have them measure it...
Logged
Quote from: 754
Dude is that a tire ? or an O-ring..??

Quote from: inkscars
This is not a pod thread
This is not a #$%* on my vacuum gauges thread
This is a help or GTFO thread.

1973 CB350F
1973 CB350G
1975 CB550K
1983 GL650I
1973 CB750K3 (http://forums.sohc4.net/index.php?topic=92888.0)
1984 Kawasaki KLT-250 (AKA 3 wheeler of death)
1994 Honda TRX300
1999 Honda TRX250

Offline anthony

  • Full Member
  • *
  • Posts: 63
  • ebay and i have a love hate relationship
Re: cb 550 dilemma
« Reply #4 on: March 26, 2011, 02:16:03 PM »
the compression was 75 psi cold when this pic was taken that was 1.5 years ago their was not a lot of blow by gas it ran good all last year. now when i do the head gasket i may disturb the base gasket witch means that will have to be replaced. then i may need to hone or bore. witch means pistons and/or rings.
Logged

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: cb 550 dilemma
« Reply #5 on: March 26, 2011, 02:18:08 PM »
All that work because you didn't do a proper compression test?

See the engine FAQ.
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Offline anthony

  • Full Member
  • *
  • Posts: 63
  • ebay and i have a love hate relationship
Re: cb 550 dilemma
« Reply #6 on: March 26, 2011, 02:33:44 PM »
no all that work for a oil leak
Logged

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: cb 550 dilemma
« Reply #7 on: March 26, 2011, 02:36:31 PM »
Quote from: anthony on March 26, 2011, 02:33:44 PM
no all that work for a oil leak
Must have been a really bad leak.  ???
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Offline anthony

  • Full Member
  • *
  • Posts: 63
  • ebay and i have a love hate relationship
Re: cb 550 dilemma
« Reply #8 on: March 26, 2011, 02:47:17 PM »
the oil leak is more of a piss off i go for a half hour ride and half to wash oil off the side covers the side of the motor. its right in the middle it runs across the fin.
Logged

Offline anthony

  • Full Member
  • *
  • Posts: 63
  • ebay and i have a love hate relationship
Re: cb 550 dilemma
« Reply #9 on: March 26, 2011, 03:07:01 PM »
what about putting gasket goop around ware the leak is. what brands are suggested.
Logged

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: cb 550 dilemma
« Reply #10 on: March 26, 2011, 03:23:49 PM »
Quote from: anthony on March 26, 2011, 02:47:17 PM
the oil leak is more of a piss off i go for a half hour ride and half to wash oil off the side covers the side of the motor. its right in the middle it runs across the fin.

Sounds like those rubber oring/pucks under the cylinder cover/cam cover had hardened.

Quote from: anthony on March 26, 2011, 03:07:01 PM
what about putting gasket goop around ware the leak is. what brands are suggested.

Any "Goop" that breaks off and plugs the tiny oil restrictor holes will trash the engine pretty good.

But, in some places, I will use GASGACINCH.

Cheers,
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Offline anthony

  • Full Member
  • *
  • Posts: 63
  • ebay and i have a love hate relationship
Re: cb 550 dilemma
« Reply #11 on: March 26, 2011, 03:30:35 PM »
for the recored the motor is assembled and running right now. i just want to get the oil leak fixed.
Logged

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: cb 550 dilemma
« Reply #12 on: March 26, 2011, 03:40:34 PM »
Best to isolate where the leak source really is.

Clean off the oil, and spray with foot powder where you think it might be coming from.  Then run the engine to see where it gets weepy.
Let us know.

Cheers,
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Offline anthony

  • Full Member
  • *
  • Posts: 63
  • ebay and i have a love hate relationship
Re: cb 550 dilemma
« Reply #13 on: March 26, 2011, 03:59:14 PM »


in the center where the cam chain goes through and head metes the cylinders
Logged

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: cb 550 dilemma
« Reply #14 on: March 26, 2011, 04:03:19 PM »
If you are certain it's at the head gasket join, I think you may have to take it back off again to investigate.

Sorry,
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Offline anthony

  • Full Member
  • *
  • Posts: 63
  • ebay and i have a love hate relationship
Re: cb 550 dilemma
« Reply #15 on: March 26, 2011, 04:07:02 PM »
 :'( i thought you would say that  :'(
do you think gasket maker would slow it down to get me through the season.
Logged

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: cb 550 dilemma
« Reply #16 on: March 26, 2011, 04:33:26 PM »
I'm not too hopeful.  Most of the sealants need a clean oil free surface to bond to.  But, you already have oil where you need to make a seal.

If there is any pressure inside, a patch on the outside will just dislodge.  You'll be bonding to paint.

Have you checked the engine breather tube?
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Offline anthony

  • Full Member
  • *
  • Posts: 63
  • ebay and i have a love hate relationship
Re: cb 550 dilemma
« Reply #17 on: March 26, 2011, 05:28:05 PM »
the breather tube is fine
Logged

Offline anthony

  • Full Member
  • *
  • Posts: 63
  • ebay and i have a love hate relationship
Re: cb 550 dilemma
« Reply #18 on: March 27, 2011, 09:04:54 AM »

i ran it for 20 min this morning at 1500ish rpm and did a compression test. i need to clean the carbs when the main jets  because the mechanic that tuned my carbs did not do a good job. he drilled out the original mains and went to big. this worked fine until i sent it to the dealership for a carb sync and found a intake leaking.


 
cylender 1 is on left
Logged
Pages: [1]   Go Up
« previous next »