Author Topic: VFR 700, cbr front wheel, ding question. Do I need to replace this wheel?  (Read 2076 times)

0 Members and 1 Guest are viewing this topic.

550_ko

  • Guest
I recently purchased an 86 VFR700 which had the wheel conversion I was dieing to do to my old VFR (retired/ sold to a friend after 120K on the clock).   Went to change the front tire yesterday and I noticed a pretty nasty ding on the left side of the rim.   The right side and center are true (within a couple of thousands) The left side however looks like it has some pothole damage.   The rim is true except for what I could best describe as a divot which has a max deformity of:  runout at the ding is .065" and wobble is .060".

I didn't notice any ill effects riding it.  But I also never got over 95mph.  What do you think?

Offline Jay B

  • Expert
  • ****
  • Posts: 763
If there's no cracking around the ding and the wheel seems solid I'd just run it. .060 isn't very much IMO. There are places that will straighten wheels. I could probably find some names for you over on the BMW forum, wheel dings are very common on those.
Jay
'77 CB550K
'74 CB350F cafe
2001 Road King
'73 CB175

Offline cb650

  • Old Timer
  • ******
  • Posts: 3,864
I have run on worse.  Maybe keep your eye out for one if it will make you feel beter. 



           Terry
18 grand and 18 miles dont make you a biker