Author Topic: What's it like in Clayton?  (Read 20634 times)

0 Members and 1 Guest are viewing this topic.

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,333
  • So, what do ya wanna talk about today?
Re: What's it like in Clayton?
« Reply #175 on: May 05, 2012, 04:12:32 AM »
Thanks Pete, can I bring a vintage non-Japanese bike? Don't worry, I won't bring the Triumph mate, so you won't need to bring a trailer, ha ha! ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline petercb750

  • Master
  • *****
  • Posts: 2,141
Re: What's it like in Clayton?
« Reply #176 on: May 05, 2012, 04:47:59 AM »
I think it'll be restricted to jap mate otherwise we'd have all sorts of non jap owners there and it would be out of control. As it is I'm expecting 150+ bikes.
Accommodation packages available and bookings are going well.
« Last Edit: May 06, 2012, 01:35:21 AM by petercb750 »
1972 750/4 K2 (his), 1976 400/4 (hers)
1982 CB1100RC (ours)

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,333
  • So, what do ya wanna talk about today?
Re: What's it like in Clayton?
« Reply #177 on: May 05, 2012, 05:11:55 AM »
I think it'll be restricted to jap mate otherwise we'd have all sorts of wannabes there and it would be out of control. As it is I'm expecting 150+ bikes.
Accommodation packages available and bookings are going well.

Fcuk that Pete, I haven't seen discrimination like that since the BSA club (of which I was a member) told me I could come for a ride with them as long as I stayed down the back and parked my CB750 away from the other club bikes when we stopped for lunch. I definitely won't be joining another club like that!  ::)
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline petercb750

  • Master
  • *****
  • Posts: 2,141
Re: What's it like in Clayton?
« Reply #178 on: May 05, 2012, 06:00:18 AM »
I hear ya terry. On our normal rides we have all sorts and we welcome them. No problems. The only reason I would think of restricting entries to jap bikes for the rally is to keep it manageable but now that I think about it more there might be provision in the guidelines for any bikes to enter. I think there is an "other" section in the judging, so that would support that thought.
But really, I doubt there would be many non jap bikes entering a vintage jap bike rally so it's not really an issue.
1972 750/4 K2 (his), 1976 400/4 (hers)
1982 CB1100RC (ours)

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,385
  • Central Texas
Re: What's it like in Clayton?
« Reply #179 on: May 05, 2012, 12:54:59 PM »
Are there any Australian made motorcycles?
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,025
  • WHAT?no gravy?
Re: What's it like in Clayton?
« Reply #180 on: May 05, 2012, 01:24:36 PM »
there were some in the 30s?i think names like james and peerless,pretty sure they used imported engines like JAP?

Offline petercb750

  • Master
  • *****
  • Posts: 2,141
Re: What's it like in Clayton?
« Reply #181 on: May 05, 2012, 03:16:17 PM »
There were dozens.  Most used commercially available motors or adaptions of but some were engineered here from scratch. Many were built here in Sth Aus.
Google Australian built motorcycles.
1972 750/4 K2 (his), 1976 400/4 (hers)
1982 CB1100RC (ours)

Offline mick7504

  • Old Timer
  • ******
  • Posts: 3,740
Re: What's it like in Clayton?
« Reply #182 on: May 05, 2012, 03:32:42 PM »
Here's a link to Ian Drysdales creations.

http://home.mira.net/~iwd/
If I was you
I'd be worried about me.

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,385
  • Central Texas
Re: What's it like in Clayton?
« Reply #183 on: May 05, 2012, 03:49:57 PM »
Here's a link to Ian Drysdales creations.

http://home.mira.net/~iwd/

Wow, a V8!  Looks awesome...
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline mick7504

  • Old Timer
  • ******
  • Posts: 3,740
Re: What's it like in Clayton?
« Reply #184 on: May 05, 2012, 04:37:21 PM »
Here's a link to Ian Drysdales creations.

http://home.mira.net/~iwd/

Wow, a V8!  Looks awesome...
I'm fairly certain that there's a Drysdale in the States.
I can remember talking with Mike Rieck quite a while ago and he was saying that he'd done some of his magic to the top end.
If I was you
I'd be worried about me.

Offline Radam

  • taco racer
  • Master
  • *****
  • Posts: 1,582
Re: What's it like in Clayton?
« Reply #185 on: May 05, 2012, 05:39:12 PM »
The vjmc looks like a cool club. Thanks for the link. How much does being in a club make a difference in how much you pay for rego, or does it at all? I like having a group to ride with if it's just some friends who like to ride together or a club. If I can get rego cheaper I'll most likely join. I may anyway. If they allow sepos in their club. ;D

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,333
  • So, what do ya wanna talk about today?
Re: What's it like in Clayton?
« Reply #186 on: May 05, 2012, 06:34:00 PM »
The vjmc looks like a cool club. Thanks for the link. How much does being in a club make a difference in how much you pay for rego, or does it at all? I like having a group to ride with if it's just some friends who like to ride together or a club. If I can get rego cheaper I'll most likely join. I may anyway. If they allow sepos in their club. ;D

Ha ha, well they don't like Seppo bikes in their club Adam, but I don't think they discriminate against the owners too, ha ha! Seriously though, I've got nothing against the VJMC, I just want to join a club where I can ride whatever I like without being considered a "Wannabe" as Pete described non vintage Jap bike riders. Considering the bikes I own, I find that rather insulting. Don't get me wrong though, Pete is a fantastic bloke, so while we may not agree on everything, he has my highest respect.

The "Club Rego" thing relates to bikes over 25 years old in Victoria, you need to be a member of a club that's signed up to the red plate initiative, get a roadworthy certificate, (some clubs have their own inspectors, but most just tell you to take your bike to a bike shop for a roadworthy inspection) then fill out a form, get the club "Red Plate" registrar to sign off on it, take the form and the roadworthy certificate to VicRoads, and pay 'em around 150 bucks, and you can ride your bike anywhere at any time for 90 days.   

That might not sound great if you want to ride every day, but my problem is that I have a company car to drive to work every day, so I only ride on weekends, and as I've got a few bikes, I won't ride every bike every weekend either, so 90 days is more than enough for me. In the past I've paid full rego (where you can ride 24 hours a day for 365 days a year) but that's around 600 bucks per year, plus other government charges on initial registration like stamp duty, ($40 for every $1000 of value) purchase of number plate, etc.

The good thing for me is that I've got 3 bikes that are eligable for club rego, so I can put them all on the road for less than one years full rego. That's 270 days of riding, (if I was able) and of course also includes TAC "Third Party" insurance, so if you get run over by a semi, you're covered for all your medical costs, lost income, rehabilitation, etc. It doesn't cover you for damage to either party's vehicles, but you can get some pretty good deals on insurance for historic vehicles thru Shannons etc.

The club thing is good, there's always a ride you can go on or some other bike related event, and normally club membership is pretty reasonable, I pay 70 bucks per year for BMW club membership, and if I go to a meeting it's a gold coin (1 or 2 dollars) donation to cover drinks and snacks after the meeting. Cheers, Terry. ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,025
  • WHAT?no gravy?
Re: What's it like in Clayton?
« Reply #187 on: May 05, 2012, 08:33:19 PM »
do you have the "solo seat"rego discount there terry?here in qld you can remove the rear pegs and fit a "solo seat"which is basicly one 500mm or less long,the yearly rego is about half then,i just rigged up a dodgy solo seat,got the ticket for it and fitted the normal seat back on with the rear pegs removed,theres no inspection once you have the compliance ticket,the authorities dont need to see the bike.

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: What's it like in Clayton?
« Reply #188 on: May 05, 2012, 09:23:22 PM »
do you have the "solo seat"rego discount there terry?here in qld you can remove the rear pegs and fit a "solo seat"which is basicly one 500mm or less long,the yearly rego is about half then,i just rigged up a dodgy solo seat,got the ticket for it and fitted the normal seat back on with the rear pegs removed,theres no inspection once you have the compliance ticket,the authorities dont need to see the bike.

Do you still need the solo seat here Dave, i was just this morning talking to a guy that has solo registration and all he did was remove the rear pegs....
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,333
  • So, what do ya wanna talk about today?
Re: What's it like in Clayton?
« Reply #189 on: May 05, 2012, 09:38:33 PM »
G'Day Men, no, we don't have the "Solo Seat" rego here Dave, I think it's a great idea but I don't like the idea of chopping a seat in half, I had it on my Ducati 900SS when I lived in Brisbane, but that was no hardship, my stock Imola seat qualified with no mods required, and it didn't have rear passenger footpegs.

SA has got a fantastic rego system, no "roadworthy inspections", and you can pay for your rego quarterly or annually. (used to be 6 monthly too, but they just got rid of that) If your rego expires for a few months over winter, you just pay your quarterly rego beginning on the day when you want to start riding again, with no penalties. My Triumph is registered in SA, and I'm in no rush to transfer it to "Pricktoria", ha ha! Cheers, Terry. ;D   
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

maduncle

  • Guest
Re: What's it like in Clayton?
« Reply #190 on: May 05, 2012, 11:50:01 PM »
You don't need to be in a club to catch up with fellow riders and enjoy riding together, I have been on the 'Netrider' web forum now for six years, there are weekly coffee nights all over Melbourne, learner skills sessions on Saturday mornings, weekend rides and tours.

Plus tips on where to buy gear, or parts, and plenty of other useful stuff.

Totally open to any and all sorts of bikes, and a great bunch of folk to get to know.

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,025
  • WHAT?no gravy?
Re: What's it like in Clayton?
« Reply #191 on: May 06, 2012, 12:24:42 AM »
do you have the "solo seat"rego discount there terry?here in qld you can remove the rear pegs and fit a "solo seat"which is basicly one 500mm or less long,the yearly rego is about half then,i just rigged up a dodgy solo seat,got the ticket for it and fitted the normal seat back on with the rear pegs removed,theres no inspection once you have the compliance ticket,the authorities dont need to see the bike.

Do you still need the solo seat here Dave, i was just this morning talking to a guy that has solo registration and all he did was remove the rear pegs....

oh ok?umm?maybe he knew the guy doing the compliance or the seat was already 500mm or less?my guy wanted to see a 500 mm seat no questions,the rear peg mounts are also supposed to be "disabled"i just mounted the rego label in one and the muffler mounts in the other,,they also have to affix an alloy metal compliance plate thats engraved with their id number and the type of compliance,,its supposed to be pop rivetted on and visable like on the frame or head stem,i talked my guy into mounting it under the seat using the existing rear guard bolts(it was visible with the dodgy rigged up seat then),i told him i didnt want the frame drilled on this old bike,he was cool,,i think theres a little flexibility depending where you go as all things can be?
« Last Edit: May 06, 2012, 12:27:24 AM by dave500 »

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: What's it like in Clayton?
« Reply #192 on: May 06, 2012, 12:45:13 AM »
Stock seat Dave, he had the tag on the left front frame tube...  I'll ask him next time i see him... ;)
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,025
  • WHAT?no gravy?
Re: What's it like in Clayton?
« Reply #193 on: May 06, 2012, 01:04:16 AM »
yeah its a bit funny how some places go by the book,,if you took them a wild chopper or obviously a cut and modified frame it might attract a more legal outlook from the guy,that red bike i did last and sold already had a solo compliance on it,,the seller didnt even know what it was and told me to take it off and throw it away as a pre 76 bike here dosent have any plate!it was mounted on the head stem,when i pulled that apart there was a little swarf gathered in the steering bearing area,pretty slack,,one guy i spoke to(shop owner)  told me how he once drilled through an oil filled frame mounting a plate!!!!

Offline petercb750

  • Master
  • *****
  • Posts: 2,141
Re: What's it like in Clayton?
« Reply #194 on: May 06, 2012, 01:33:43 AM »
Terry, the word "wannabe" was a bad and hasty choice by me and not really meant, and doesnt even fit into the context of what I was saying and certainly was not intended to imply you're one!!
I could have said "wishful Vjm owner" but that wouldn't have fitted you either.
I think everyone knows what I was trying to say but I just used the wrong word.
I feel like a knob for using it and should have thought about it more.
Sorry mate. As you know I hold you in high regard.
Peter.

Ps offending word edited in original post.
« Last Edit: May 06, 2012, 01:36:37 AM by petercb750 »
1972 750/4 K2 (his), 1976 400/4 (hers)
1982 CB1100RC (ours)

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,333
  • So, what do ya wanna talk about today?
Re: What's it like in Clayton?
« Reply #195 on: May 06, 2012, 05:47:38 AM »
No problem Pete, how's that beautiful CB1100R going? ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline petercb750

  • Master
  • *****
  • Posts: 2,141
Re: What's it like in Clayton?
« Reply #196 on: May 06, 2012, 05:52:05 AM »
Sweeeeet mate  8) lovin the oomph  ;D makes the 750 feel a bit slow but.
1972 750/4 K2 (his), 1976 400/4 (hers)
1982 CB1100RC (ours)

Offline Radam

  • taco racer
  • Master
  • *****
  • Posts: 1,582
Re: What's it like in Clayton?
« Reply #197 on: May 06, 2012, 02:33:01 PM »
I know I don't need a club to ride with people, but if it makes it cheaper to get rego I'd be ok with it. I'd be happy to just ride with people on this forum and whoever I/we meet on rides. I don't totally understand the way the rego goes here with the 90 days 24hrs a day and all that. It's a bit different than what I'm used to. When I get to talk to Terry in person I'll see if he can help me understand. I have to worry about getting the bike and putting it together first though. I'll let future Adam deal with the rego. ;D

Offline Radam

  • taco racer
  • Master
  • *****
  • Posts: 1,582
Re: What's it like in Clayton?
« Reply #198 on: May 06, 2012, 06:11:11 PM »
Well, looks like future Adam will have less problems with rego... I just got a job! I'm a forklift driver at a place less than 2km from my house! I start on Wednesday. Looks like the stress level in my house will be lower soon. ;D Thank you all for helping me figure out what not to do. I hope I didn't annoy you all too much when I was freaking out about finding a job. I haven't taken this long of a break from work in 15 years so it's been hard. Now maybe we can afford to get my parents out for a visit sooner!

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: What's it like in Clayton?
« Reply #199 on: May 06, 2012, 07:02:25 PM »
Congrats on the job Adam, fork lift drivers are reasonably well paid here so you should have some left over for the bike.... ;)
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.