Poll

Which pistons do you prefer?

SS
5 (25%)
Phenolic
15 (75%)

Total Members Voted: 18

« previous next »
Pages: [1]   Go Down

Author Topic: SS vs Phenolic?  (Read 3370 times)

0 Members and 1 Guest are viewing this topic.

Offline joren

  • Full Member
  • *
  • Posts: 9
SS vs Phenolic?
« on: April 22, 2011, 05:52:48 PM »
I bet this is come up before, but I couldn't seem to find it. Are Phenolic, or SS break pistons better to run on a little cb550? My current ones have some pretty major pitting, and I'm not about to pay honda $115 for something I can get made of better(?) material.
I saw some reference to SS and rubber not meshing, but as far as I can tell, the seal seems to be some sort of metal, maybe I need to pull it out and try to figure out what it is. 

Anyways, just thought I'd try to get some info from people who have ran either of them. They seem to be priced about the same, waiting to hear back from this keven dude to see if he still makes the phenolic ones.

-Joren
Logged

Offline KRONUS0100

  • MAD MATT THE MANIAC
  • Expert
  • ****
  • Posts: 1,217
Re: SS vs Phenolic?
« Reply #1 on: April 22, 2011, 06:38:13 PM »
buddy of mine turned my new pistons out of aluminum at machine he works for.  cb750F.
Logged
MATT
current bikes:  1976 CB750F, 1981 GS1100E
bikes owned:1981 GL1100I, 1990 GS500E, 1981 GS850, 1977 and 1979 GS750, 1974 CB750, 1975 CB750, and a 1982 GS750E

Offline Kevin400F

  • Hot Shot
  • ***
  • Posts: 600
Re: SS vs Phenolic?
« Reply #2 on: April 22, 2011, 07:36:57 PM »
Hi Joren.  E-mail sent with pic and details.

Kevin
Logged

Offline Steve_K

  • Expert
  • ****
  • Posts: 923
Re: SS vs Phenolic?
« Reply #3 on: April 23, 2011, 06:16:39 AM »
I made mine out of SS because I could.  Took some time for me to polish the OD to suit me.  I would buy the Phenolic piston if I could not make a SS one myself.
Steve
Logged
Steve_K

76 CB 550, 73CB750, 86 GSX-R750, 16 Slingshot
Old rides:305 Honda, CL350, 74 CB550
 05 SV1000S, 88 CBR600,92 VFR, 88 Hawk GT, 96 Ducati 900SS, 98 Kaw ZX6R, SV650

Offline hondaface75

  • Hot Shot
  • ***
  • Posts: 330
Re: SS vs Phenolic?
« Reply #4 on: April 23, 2011, 07:04:03 AM »
This might be stupid, but whats the difference? Is phenolic a metal? Ive never heard of it before, or is it a type of design?
Logged

Offline Kevin400F

  • Hot Shot
  • ***
  • Posts: 600
Re: SS vs Phenolic?
« Reply #5 on: April 23, 2011, 07:29:15 AM »
The phenolic material is non-metallic.  It is a compression-molded thermosetting composite resin material, dimensionally stable, capable of exposure to 800 degrees F during short excursions.  Many modern cars / trucks use phenolic pistons as OEM equipment.
Logged

Offline hondaface75

  • Hot Shot
  • ***
  • Posts: 330
Re: SS vs Phenolic?
« Reply #6 on: April 23, 2011, 07:37:25 AM »
Thanks!  Ya learn somethin new everyday!
Logged

Offline Duke McDukiedook

  • Space Force 6 Star General
  • Really Old Timer ...
  • *******
  • Posts: 12,690
  • Wish? Did somebody say wish?
Re: SS vs Phenolic?
« Reply #7 on: April 23, 2011, 01:11:15 PM »
Phenolic all the way.
Logged
"Well, Mr. Carpetbagger. We got somethin' in this territory called the Missouri boat ride."   Josey Wales

"It's Baltimore, gentlemen. The gods will not save you." Ervin Burrell

CB750 K3 crat | (2) 1986 VFR750F

Offline steam-powered man

  • Not the eggman, Not the walrus, I am the
  • Hot Shot
  • ***
  • Posts: 591
  • Where are you going? I was going to make Espresso
Re: SS vs Phenolic?
« Reply #8 on: April 23, 2011, 01:21:28 PM »
ditto on the phenolic.  perfect fit and finish, no corrosion, last your lifetime. 
Logged
searching for a dr350se

Offline ddanz27

  • Full Member
  • *
  • Posts: 85
  • 1974 CB350F
Re: SS vs Phenolic?
« Reply #9 on: April 23, 2011, 02:49:35 PM »
Plus one for phenolic. Its a better buy too!
Logged
1974 Honda CB350F

Offline ColinMc

  • Expert
  • ****
  • Posts: 1,006
  • There aint no pickle like a super pickle...
Re: SS vs Phenolic?
« Reply #10 on: April 23, 2011, 03:08:33 PM »
Where can you get phenolic for any honda? I've only ever found stainless...
Logged
1976 CB750K - Cafe Project...taking forever
1984 Honda MB-5 - MB-8 conversion in process
2001 Ducati 748 - Built 996 motor sleeper

Offline Hannibal Smith

  • 3rd Grade Dropout
  • Hot Shot
  • ***
  • Posts: 502
Re: SS vs Phenolic?
« Reply #11 on: April 24, 2011, 10:14:29 AM »
Before everybody goes nuts for "Phenolic" pistons, a history/engineering class might be in order.

The "Phenolic" piston is the offspring of the "Phenolic" puck or insert of yesteryear.

"Phenolic" is an insulator, and was used to combat the severe heat generated by heavy racecars. The old fashined method was to fab steel pistons with a relief or allocation for a "Phenolic" disc that would be in contact with the brakepad. This would insulate a portion of the heat from effecting the brake fluid temps- all this "Phenolic" was for, was to combat "fluid boil" and the like.

"Phenolic" is a totally generic term, and to an engineer, the word by itself means virtually nothing. In my shop alone, I have 4 different grades, each with a purpose.

We have peanut horsepower bikes, so the use of "Phenolic" gives you no real advantage. "Phenolic" is considerably cheaper than stainless steel typically, and it machines way faster.

Typical "Phenolic" heat figures are 260-275F and maybe intermittent to 780-800F (but only for certain types).

Run "Phenolic" if you like, I prefer good ol' stainless steel for a 70's bike. Modern stuff? A whole 'nother thread.
Logged
Follow my build "P38 Racer" in Project section

Offline Kevin400F

  • Hot Shot
  • ***
  • Posts: 600
Re: SS vs Phenolic?
« Reply #12 on: April 24, 2011, 10:26:15 AM »
The phenolic brake pistons we're talking about on here are based on factory-new phenolic brake pistons from a late-model Lincoln LS sedan application.  The OD of the piston (sealing surface) is not altered in any way; the Lincoln brake pistons are simply cut down to the correct overall length to fit the CB350F/CB400F/CB550 caliper, with a chamfer added to the bore to clear the "raised dome" on the back side of the OEM Honda brake pad.  Rest assured this is not some sort of "generic" phenolic material......it is a high-performance brake piston of the correct diameter.

That being said, I see no real reason why stainless wouldn't work OK as well.
Logged

Offline Hannibal Smith

  • 3rd Grade Dropout
  • Hot Shot
  • ***
  • Posts: 502
Re: SS vs Phenolic?
« Reply #13 on: April 24, 2011, 10:38:47 AM »
Quote from: Kevin400F on April 24, 2011, 10:26:15 AM
The phenolic brake pistons we're talking about on here are based on factory-new phenolic brake pistons from a late-model Lincoln LS sedan application.  The OD of the piston (sealing surface) is not altered in any way; the Lincoln brake pistons are simply cut down to the correct overall length to fit the CB350F/CB400F/CB550 caliper, with a chamfer added to the bore to clear the "raised dome" on the back side of the OEM Honda brake pad.  Rest assured this is not some sort of "generic" phenolic material......it is a high-performance brake piston of the correct diameter.

That being said, I see no real reason why stainless wouldn't work OK as well.


Ok- That is a factory thermal formed unit that is modified. Your piston is "good to go"!
I was going to say something about fabricating one from round stock, and how that would be sketchy (to say the least)-
Those factory units are 100% fine and durable, and "Phenolic" is truly a generic term when we are talking about that type. I still prefer stainless for 70's bike applications, but you guys/gals had me scared for a minute!
Logged
Follow my build "P38 Racer" in Project section

Offline Doctorlumen

  • Full Member
  • *
  • Posts: 69
Re: SS vs Phenolic?
« Reply #14 on: April 24, 2011, 10:51:28 AM »
I run a phenolic piston in my bike and love it. A lot cheaper (mine was $35) than stock. And lighter too!
Logged
Pages: [1]   Go Up
« previous next »