Author Topic: Hello from Alaska!  (Read 653 times)

0 Members and 1 Guest are viewing this topic.

Offline coldwave007

  • Enthusiast
  • **
  • Posts: 120
Hello from Alaska!
« on: April 24, 2011, 09:01:41 PM »
Hey everyone,

First off, I just want to say thank you to the fine people who run this forum.  I've been reading through the many threads on here since December, and it's really been an amazing source of information.  Thank you!!!  (And apologies for the wall of text.  It's been an exciting day!)

And on that note, in December I purchased a 1980 Honda CB650C Custom.  It was stored outside, uncovered, and frozen in snow and ice.  Some haggling and $650 later (he was asking $1200), my Dad and I winched it onto a trailer and drug it home.  24 hours of thawing out in the garage later, we got it fired.  Woohoo!!!  It can at least run!  (barely)

As we dug into the bike though, it quickly became apparent this this bike had been beaten hard, and actually laid down at some point.  There was damage all along the right side; snapped cables, damaged gauges, bent handlebar, shoddy welds to hold bits on, etc.  The money calculator in my brain began ticking. 

Over the next few months I did a lot of parts acquisition/replacement.  My bank account quivered whenever I neared Paypal.  But the cool thing was, each time I fixed something or replaced a broken part, I was able to step back and go "That part's okay now.  It's done.  I don't have to worry about it."  The peace of mind was well worth it!

The last couple of weeks have been the most dramatic and easily the most stressful.  Long story short, CB650 carbs are very, very particular about their air flow!  We'd gone through everything we possible could on this bike.  Ignition timing, coils, spark plugs, valve adjustment, checked the spark units, cleaned the  fuel petcock, and I don't know how many times cleaning those carbs.  The final time they came off, we discovered that she was missing an o-ring and a washer on one of the pilot jets, which while that improved the idle a bit more, it still didn't solve the throttle issue.

Finally today I was looking at it with my Dad.  I'd taken it for two rides up/down the road, and while I could very, very slowly ease the throttle up to 4500rpms, I couldn't get past 5000 no matter what.  Over the last couple of days we'd come to the conclusion that it had to be fuel.  It just wasn't getting enough fuel, or the mixture was wrong...something! 

I said "screw it" and took the bike for one last run.  We'd just had the carbs on/off again and this time while throttling, I noticed a slight "surge", like the bike was trying to get the right mixture, but for some reason just couldn't do it.  I went ahead and pulled the choke cable to half.  BAM!!!! Instant improvement!!!!!  All of a sudden I was able to scream up to 85 like it was no sweat!

I returned home and talked it over with Dad.  Obviously the choke was chaning the air/fuel mixture...but why did it help so much?  I was staring once again at the bike when it suddenly hit me.  We were running with the air box off.  When I choked it, it closed off the carb throat.  Would the air box cause a similar restriction?  Only one way to find out!!!

And so out came the carbs one last time, in went the air box, and away I went.  That ride was so amazing!  The bike had plenty of power and pulled easy out of any gear.  And no choke needed!!!!

So yeah, I love this bike.  I've may have cursed it at times, begged and pleaded with it at others.  But right now, all of that is forgiven!

P.S.  If the Honda engineers decided you need an air box, you need an air box.

P.S.S.   Picks below.   The first is how she looked when I first got her in December.  The second was taken just this afternoon after riding for a bit.  I haven't painted the tank/side covers yet - I plan to do that this winter, since the dent will need to be pulled out of the tank first.

« Last Edit: April 24, 2011, 09:48:39 PM by coldwave007 »
1980 Honda CB650C Custom, 1972 Yamaha LT-2 100

Offline cb650

  • Old Timer
  • ******
  • Posts: 3,864
Re: Hello from Alaska!
« Reply #1 on: April 24, 2011, 09:59:15 PM »
Another 650 really!!!!!    Looks just like one of mine.   Keep workin and get a parts bike or 2 and it will never let you down.   I rode mine home in the snow yesterday.  Has problems but i love it.
18 grand and 18 miles dont make you a biker

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,927
  • Bought her new 4/75
Re: Hello from Alaska!
« Reply #2 on: April 24, 2011, 10:37:46 PM »
Terry,

I'm smelling a plan here. I wonder just how close coldwave is to the ferry port from Seattle/Vancouver. That is near where Godzilla will complete his first ride (almost). I'd like to think that by August Godzilla maybe could ride a ferry by himself. Hummmmm.  ::)
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline CycleRanger

  • No comment about being an
  • Really Old Timer ...
  • *******
  • Posts: 5,453
  • Central Texas Shop Manual Advocate
Re: Hello from Alaska!
« Reply #3 on: April 25, 2011, 11:27:06 AM »
P.S.  If the Honda engineers decided you need an air box, you need an air box.

QFT.

Alaska, where the riding season is short but the days you can ride are really long!  :D

Howdy, welcome!
Do you have a copy of the Honda Shop Manual or Parts List for your bike? Get one here:
https://www.honda4fun.com/materiale/documentazione-tecnica
CB750K5        '79 XL250s     CL350K3
CB750K3        '76 XS650      '76 CJ360T

Offline coldwave007

  • Enthusiast
  • **
  • Posts: 120
Re: Hello from Alaska!
« Reply #4 on: April 25, 2011, 11:56:44 AM »
Thanks for the welcome guys!

@cb650 - Yeah, I'm keeping an eye out for a second CB650 for parts.  Haven't seen any yet though.  I'll probably advertise for one in late summer/fall when the bike season closes and prices plummet.  For now though, this thing is sweet!!!  All that's left mechanically is I still need to pull the rear tire/axle and inspect/lube it.  The only other quirk is the typical CB650 "Hot Start" problem of starter being slow after a long ride.  I'm currently reading through the threads on that issue.

@Jerry - Well, I'm in North Pole, Alaska (center of the state), so about 400 miles or so from the nearest Alaskan Ferry!

@ Cycle - Yeah, I'm really stoked about riding this year.  I got my license late last fall, so only got a couple of weeks of riding.  I'm already planning to take a week this June to just ride.

1980 Honda CB650C Custom, 1972 Yamaha LT-2 100