Author Topic: 13mm Master Cylinder? Will Any do?  (Read 1859 times)

0 Members and 1 Guest are viewing this topic.

Offline ntm1974

  • Enthusiast
  • **
  • Posts: 106
13mm Master Cylinder? Will Any do?
« on: April 26, 2011, 05:26:11 PM »

Will any 13mm master cylidner do for a single disk front brake on a 74 cb350F?  I've seen some with brake light switch wires sticking out.  Is that an issue or can I just tape them up and forget about them when using them on a cb350f?

Thanks for looking.

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,798
  • Vancouver
Re: 13mm Master Cylinder? Will Any do?
« Reply #1 on: April 26, 2011, 05:38:41 PM »
Providing you have the correct brake lines, any 13mm master cylinder will do.
Consider one with a mirror mount if necessary, and use the electronic brake light switch too, if they come with one.
Gives you the opertunity to run a nice braided line direct to the caliper.
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0