Author Topic: Dorothy III - CB750 (Read 103646 times)

70CB750 · « **Reply #425 on:** May 10, 2022, 05:51:08 AM »

I stripped the tank and found a hole

I will have to solder it.

On related topic, what is your prefered body filler? I mean auto body, not bacon, biscuits and gravy.

Gurp · « **Reply #426 on:** May 10, 2022, 07:46:38 AM »

Mhmmm bacon....

MauiK3 · « **Reply #427 on:** May 10, 2022, 08:05:30 AM »

Maybe braze it or use silver solder?

70CB750 · « **Reply #428 on:** June 09, 2022, 01:02:52 PM »

Working on the tank, the deer imprint is filled in and now it is the primer/sanding/primer/sanding....

Not sure what color I will go with and if I want to paint the Don Vesco fairing the same.

Stev-o · « **Reply #429 on:** June 16, 2022, 03:37:13 PM »

Quote from: 70CB750 on June 09, 2022, 01:02:52 PM

Not sure what color I will go with...

How 'bout Blue, the color of Dorothy's dress?!!

grcamna2 · « **Reply #430 on:** June 16, 2022, 06:11:05 PM »

Quote from: Stev-o on June 16, 2022, 03:37:13 PM

Quote from: 70CB750 on June 09, 2022, 01:02:52 PM

Not sure what color I will go with...

How 'bout Blue, the color of Dorothy's dress?!!

I'll place my vote

70CB750 · « **Reply #431 on:** June 17, 2022, 06:35:20 AM »

Quote from: Stev-o on June 16, 2022, 03:37:13 PM

Quote from: 70CB750 on June 09, 2022, 01:02:52 PM

Not sure what color I will go with...

How 'bout Blue, the color of Dorothy's dress?!!

I will consider it

Gurp · « **Reply #432 on:** June 19, 2022, 05:43:46 PM »

I will second that!

70CB750 · « **Reply #433 on:** January 22, 2023, 07:20:36 AM »

Valves. Cleaned and polished.

MauiK3 · « **Reply #434 on:** January 22, 2023, 07:46:44 AM »

Making headway!

70CB750 · « **Reply #435 on:** January 22, 2023, 08:35:23 AM »

Quote from: MauiK3 on January 22, 2023, 07:46:44 AM

Making headway!

Trying. She is boxed for too long already. Lapped valves for #1 and set oil there to check.

BenelliSEI · « **Reply #436 on:** January 22, 2023, 12:13:56 PM »

Quote from: 70CB750 on January 22, 2023, 08:35:23 AM

Quote from: MauiK3 on January 22, 2023, 07:46:44 AM
Making headway!

Trying. She is boxed for too long already. Lapped valves for #1 and set oil there to check.

Well done! Ahead of me, still waiting for my head from vapour blasting!

70CB750 · « **Reply #437 on:** January 23, 2023, 03:51:10 AM »

Twelve hours later. There was not a single drop after 3 hours. I wonder if the colder night had anything to do with it. Not a big deal, I will revisit 2,3 and 4 with fine lapping compound.

Now, the head is easy, but I still don't know what to do about cylinders and pistons/rings.

MauiK3 · « **Reply #438 on:** January 23, 2023, 07:05:37 AM »

What was the red liquid? Did it stay thin?
If so, seems that you are in good shape.

70CB750 · « **Reply #439 on:** January 23, 2023, 07:12:51 AM »

Quote from: MauiK3 on January 23, 2023, 07:05:37 AM

What was the red liquid? Did it stay thin?
If so, seems that you are in good shape.

ATF, thinnest oil I had.

jgger · « **Reply #440 on:** January 23, 2023, 08:40:36 AM »

Gasoline works too, plus it will stay thin as the temperature goes down.

70CB750 · « **Reply #441 on:** January 23, 2023, 09:33:33 AM »

Quote from: jgger on January 23, 2023, 08:40:36 AM

Gasoline works too, plus it will stay thin as the temperature goes down.

I would not leave gas like this over night.

BenelliSEI · « **Reply #442 on:** January 23, 2023, 04:20:42 PM »

Quote from: 70CB750 on January 23, 2023, 09:33:33 AM

Quote from: jgger on January 23, 2023, 08:40:36 AM
Gasoline works too, plus it will stay thin as the temperature goes down.

I would not leave gas like this over night.

I use a bit of varsol. It’s so thin, I only wait a few minutes. If it doesn’t leak, pour it into a bowl and test the next one.

jgger · « **Reply #443 on:** January 23, 2023, 05:08:13 PM »

Same idea with gasoline, late 60's and 70's that was what I used before I got into 2- strokes.

70CB750 · « **Reply #444 on:** January 27, 2023, 06:01:17 PM »

Little bit more lapping, tested with rubbing alcohol and not a single drop in two hours. Done with that one, now what?

jgger · « **Reply #445 on:** January 27, 2023, 06:31:20 PM »

Well I would say that is tight! Good job, give yourself a pat on the back.

70CB750 · « **Reply #446 on:** January 28, 2023, 04:43:33 AM »

Quote from: jgger on January 27, 2023, 06:31:20 PM

Well I would say that is tight! Good job, give yourself a pat on the back.

Thanks 😊

BenelliSEI · « **Reply #447 on:** January 28, 2023, 06:30:53 AM »

Quote from: 70CB750 on January 27, 2023, 06:01:17 PM

Little bit more lapping, tested with rubbing alcohol and not a single drop in two hours. Done with that one, now what?

Nice! That works.

Stev-o · « **Reply #448 on:** January 28, 2023, 06:55:10 AM »

Quote from: 70CB750 on January 27, 2023, 06:01:17 PM

Done with that one, now what?

I'd say you are due a cold beer! Well done Mate...

70CB750 · « **Reply #449 on:** January 28, 2023, 07:02:44 AM »

Quote from: Stev-o on January 28, 2023, 06:55:10 AM

Quote from: 70CB750 on January 27, 2023, 06:01:17 PM
Done with that one, now what?

I'd say you are due a cold beer! Well done Mate...

That's given

But what am I going to do about cylinders and pistons, that is the question.

News:

Author Topic: Dorothy III - CB750 (Read 103646 times)