Topic: Dorothy III - CB750

[MauiK3]

Many paints are called semi gloss and they vary a lot, I think Dupli Color is close.
I have used POR15 chassis black to good effect but lately I have had some bad batches or something and it did not go on well. I think I got an old can of it.

[seanbarney41]

In my experience a gloss black single stage is gonna be just a bit too glossy when new.  After a couple vigorous cleanings, a perfect match.

[grcamna2]

Many paints are called semi gloss and they vary a lot, I think Dupli Color is close.
I have used POR15 chassis black to good effect but lately I have had some bad batches or something and it did not go on well. I think I got an old can of it.

I've been wondering for a while when they're going to put a date code on these cans of paint which can be read by the consumers: Us 

[70CB750]

Many paints are called semi gloss and they vary a lot, I think Dupli Color is close.
I have used POR15 chassis black to good effect but lately I have had some bad batches or something and it did not go on well. I think I got an old can of it.

I used POR15 on my CJ7.  Good stuff.  But I need to outsource the frame to speed things up and the company will strip it and powder coat it.

[HondaMan]

Many paints are called semi gloss and they vary a lot, I think Dupli Color is close.
I have used POR15 chassis black to good effect but lately I have had some bad batches or something and it did not go on well. I think I got an old can of it.

I've had that problem with the POR paint, too. It doesn't seem as reliable and excellent as their POR15, which I've used to save several tanks. That stuff rocks.

[MauiK3]

Yes, not sure I'd do another frame with it unless I tested whichever can I opened. It doesn't seem to want to level out very well.

[HondaMan]

I've been wondering for a while when they're going to put a date code on these cans of paint which can be read by the consumers: Us 

I wondered that, too, until I was the engineer building a machine that included putting date-codes and barcodes onto finished products. It turns out, the date code is coded and standardized so machines can read it: only those manufacturers who decide on purpose to make it visible to the public in text bother to add more printer capability to their machines (expensive at best, and only available since about 2008!). In the beginning (1990-ish) the scanners could only read bars and spaces, which brought us the common 'scan code' you see on all products now. A scanner that can also read text characters is about 10x more expensive than a barcode reader, so the scenario continues... 

[grcamna2]

I've been wondering for a while when they're going to put a date code on these cans of paint which can be read by the consumers: Us 

I wondered that, too, until I was the engineer building a machine that included putting date-codes and barcodes onto finished products. It turns out, the date code is coded and standardized so machines can read it: only those manufacturers who decide on purpose to make it visible to the public in text bother to add more printer capability to their machines (expensive at best, and only available since about 2008!). In the beginning (1990-ish) the scanners could only read bars and spaces, which brought us the common 'scan code' you see on all products now. A scanner that can also read text characters is about 10x more expensive than a barcode reader, so the scenario continues... 

This makes it almost impossible to trust the vendors of these aerosol spray paint cans.
I don't like doing prep twice.

[willbird]

I've been wondering for a while when they're going to put a date code on these cans of paint which can be read by the consumers: Us 

I wondered that, too, until I was the engineer building a machine that included putting date-codes and barcodes onto finished products. It turns out, the date code is coded and standardized so machines can read it: only those manufacturers who decide on purpose to make it visible to the public in text bother to add more printer capability to their machines (expensive at best, and only available since about 2008!). In the beginning (1990-ish) the scanners could only read bars and spaces, which brought us the common 'scan code' you see on all products now. A scanner that can also read text characters is about 10x more expensive than a barcode reader, so the scenario continues... 

one past job the company worked on parts for general motors. we put a serial number on the parts which included the letter designating the machine it was run on, Julian date, and a part number for that day which incremented up. the pin stamp device had “dot” and “smooth”…the cameras in 2008 could not OCR read “smooth” only “dot” could be read. a few years into the job they made us add a 3D bar code. only recently learned the difference between 2D and 3D. we called them 2D but being stamped they were actually 3D barcodes

[grcamna2]

I've been wondering for a while when they're going to put a date code on these cans of paint which can be read by the consumers: Us 

I wondered that, too, until I was the engineer building a machine that included putting date-codes and barcodes onto finished products. It turns out, the date code is coded and standardized so machines can read it: only those manufacturers who decide on purpose to make it visible to the public in text bother to add more printer capability to their machines (expensive at best, and only available since about 2008!). In the beginning (1990-ish) the scanners could only read bars and spaces, which brought us the common 'scan code' you see on all products now. A scanner that can also read text characters is about 10x more expensive than a barcode reader, so the scenario continues... 

one past job the company worked on parts for general motors. we put a serial number on the parts which included the letter designating the machine it was run on, Julian date, and a part number for that day which incremented up. the pin stamp device had “dot” and “smooth”…the cameras in 2008 could not OCR read “smooth” only “dot” could be read. a few years into the job they made us add a 3D bar code. only recently learned the difference between 2D and 3D. we called them 2D but being stamped they were actually 3D barcodes

Do you think NAPA would have a bar code reader to check the date/code ?

[willbird]

A normal QR code you can read with a smart phone ?? tons of free apps

[70CB750]

Mocking up the powder coated frame

[70CB750]

The wheel came from IKEA. 

[Stev-o]

The wheel came from IKEA. 

What??!!!!!    And I assume you have another swingarm?

[70CB750]

The wheel came from IKEA. 

What??!!!!!    And I assume you have another swingarm?

Yup, there should be a different swingarm if everything works out.

[70CB750]

After several confused attempts I decided to practice with an old rim.

[RAFster122s]

Looks like you got the hang of it...

[70CB750]

Seems like it.   

Now gotta build a truing stand and get a torque wrench.

[grcamna2]

Looks good Prokop.
Which spokes are those,Sapim brand,or stock Honda?

[70CB750]

Looks good Prokop.
Which spokes are those,Sapim brand,or stock Honda?

Thank you.

SS spokes from Buchanan. 

[HondaMan]

How much was the Buchanan set now?

[70CB750]

How much was the Buchanan set now?

Spokes + nipplee: $159

[Stev-o]

Looks good Prokop.
Which spokes are those,Sapim brand,or stock Honda?

SS spokes from Buchanan. 

You'll never regret buying them...

[70CB750]

Still truing the rim.  Finally made me a truing stand.

[calj737]

You gotta love the 1,001 uses for angle iron! Such a versatile material shape.