« previous next »
Pages: [1]   Go Down

Author Topic: Clutch on New Wing is needed (Done)  (Read 808 times)

0 Members and 1 Guest are viewing this topic.

Offline 78 k550

  • Master
  • *****
  • Posts: 2,479
Clutch on New Wing is needed (Done)
« on: April 30, 2011, 11:08:23 AM »
Hey All,
A got a spare clutch all spec. out and ready to go in. I got it to grab but it is shot. I'm going to see whats up with the front forks and take the air assist off someone put on.

Anyone want to swing by and watch and bs pm me.

Paul
« Last Edit: May 05, 2011, 10:15:11 PM by 78 k550 »
Logged
Paul
Littleton, CO

76/77 CB 750F, 
75 GL1000, (AKA GL1-242 NGWClub),
76 GL1000 LTD
84 GL1200 Standard
6 Bultaco's= 42, 49, 121, 152, 167, 188

Offline 78 k550

  • Master
  • *****
  • Posts: 2,479
Re: Clutch on New Wing is needed
« Reply #1 on: April 30, 2011, 02:22:02 PM »
will 1/32" gasket material be good for making my own clutch cover gasket? Thats the thinest I could find at the Car parts store.

Paul
Logged
Paul
Littleton, CO

76/77 CB 750F, 
75 GL1000, (AKA GL1-242 NGWClub),
76 GL1000 LTD
84 GL1200 Standard
6 Bultaco's= 42, 49, 121, 152, 167, 188

Offline chickenman_26

  • Hot Shot
  • ***
  • Posts: 598
    • Motorcycle Consumer News
Re: Clutch on New Wing is needed
« Reply #2 on: May 03, 2011, 06:52:03 AM »
Quote from: 78 k550 on April 30, 2011, 02:22:02 PM
will 1/32" gasket material be good for making my own clutch cover gasket? Thats the thinest I could find at the Car parts store.

Paul
Order one today from your local Honda dealer, and you should have it by Friday.
Logged
MCN DTF

Offline 78 k550

  • Master
  • *****
  • Posts: 2,479
Re: Clutch on New Wing is needed (Done)
« Reply #3 on: May 05, 2011, 10:15:59 PM »
Hey All,
My Wing is starting to finish up. I got the clutch in tonight.

Paul
Logged
Paul
Littleton, CO

76/77 CB 750F, 
75 GL1000, (AKA GL1-242 NGWClub),
76 GL1000 LTD
84 GL1200 Standard
6 Bultaco's= 42, 49, 121, 152, 167, 188
Pages: [1]   Go Up
« previous next »