« previous next »
Pages: [1]   Go Down

Author Topic: Flow Bench  (Read 2687 times)

0 Members and 1 Guest are viewing this topic.

Offline Matt Hubbell

  • Enthusiast
  • **
  • Posts: 126
Flow Bench
« on: May 16, 2011, 12:16:22 PM »
I was at a friends house over the weekend and he was showing me his brand new flow bench. What exactly does the flow bench do for you and how does it make you go faster. Ok go.
Logged

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Flow Bench
« Reply #1 on: May 16, 2011, 12:25:20 PM »
Did your friend not tell you, does he know how to use it. ::)

Sam ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,938
Re: Flow Bench
« Reply #2 on: May 16, 2011, 01:09:38 PM »
Would your friend happen to have a Spiderman figure next to the flow bench ;)
Logged
Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Flow Bench
« Reply #3 on: May 16, 2011, 01:24:20 PM »
« Last Edit: May 16, 2011, 01:25:57 PM by SamCB750A »
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline turboguzzi

  • Old Timer
  • ******
  • Posts: 4,084
Re: Flow Bench
« Reply #4 on: May 16, 2011, 01:37:56 PM »
Quote from: Matt Hubbell on May 16, 2011, 12:16:22 PM
I was at a friends house over the weekend and he was showing me his brand new flow bench. What exactly does the flow bench do for you and how does it make you go faster. Ok go.

What model bench flow was it?  Like Sam says, kind of strange he had the time to show it to you but not tell you what good is it for. 

On the other hand, didnt Mike just bought one ;)

TG

Logged

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Flow Bench
« Reply #5 on: May 16, 2011, 02:31:12 PM »
Who's Mike ? ;D ;D ;D ;D ;D

Sam. ::)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline turboguzzi

  • Old Timer
  • ******
  • Posts: 4,084
Re: Flow Bench
« Reply #6 on: May 16, 2011, 03:52:42 PM »
mike the bike  8)
Logged

Offline Matt Hubbell

  • Enthusiast
  • **
  • Posts: 126
Re: Flow Bench
« Reply #7 on: May 16, 2011, 05:07:04 PM »
Sorry but I wanted some additional info, yes Mike explained a little about what it does , but I want to know more of how it works. I understand that it measures flow, but what do you get from that. Obviously none of you guys know anything about it, so I will just wait for Mike to fill me in further :)
Logged

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: Flow Bench
« Reply #8 on: May 16, 2011, 05:21:47 PM »
Well....kinda like the more you flow
the faster you go.
Sorta like a dyno for the cylinder head.
Or carbs etc.
you measure,make changes ,measure,make changes, again and again etc.
Almost as much fun as 71 dyno runs! ;) ;D Bill
Logged
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline Matt Hubbell

  • Enthusiast
  • **
  • Posts: 126
Re: Flow Bench
« Reply #9 on: May 16, 2011, 05:46:26 PM »
so during the porting process the flow bench is  measuring  what is done. Is that all it does?
Logged

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,090
  • Sunny Central Florida
Re: Flow Bench
« Reply #10 on: May 16, 2011, 06:11:28 PM »
Quote from: bellcow54 on May 16, 2011, 05:21:47 PM
Well....kinda like the more you flow
the faster you go.

+1

If I'm not mistaken it can also be used to bench sync the carbs...
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Online scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,262
  • Humboldt, AZ
Re: Flow Bench
« Reply #11 on: May 16, 2011, 08:55:03 PM »
Quote from: bellcow54 on May 16, 2011, 05:21:47 PM
Well....kinda like the more you flow
the faster you go.
Well, not necessarily; there can be too much of a "good" thing. ;)
Logged
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,560
  • Big ideas....
Re: Flow Bench
« Reply #12 on: May 17, 2011, 04:44:05 AM »
Quote from: scottly on May 16, 2011, 08:55:03 PM
Quote from: bellcow54 on May 16, 2011, 05:21:47 PM
Well....kinda like the more you flow
the faster you go.
Well, not necessarily; there can be too much of a "good" thing. ;)
A sewer pipe flows very well but it doesn't work very well as an intake or exhaust port. ;)
Logged
Owner of the "Million Dollar CB"

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: Flow Bench
« Reply #13 on: May 17, 2011, 05:05:40 AM »
OK,you can go too big!(I knew I left that one open ;))But the flowbench tells you what effect your work had.
Dyno then tells you more.
But the track is KING!!! ;) ;D
Logged
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline BLUE71TURBO

  • Master
  • *****
  • Posts: 1,849
Re: Flow Bench
« Reply #14 on: May 17, 2011, 08:42:57 AM »
Quote from: Matt Hubbell on May 16, 2011, 12:16:22 PM
I was at a friends house over the weekend and he was showing me his brand new flow bench. What exactly does the flow bench do for you and how does it make you go faster. Ok go.

              Here ya go Matt ............http://en.wikipedia.org/wiki/Air_flow_bench    ;) 

              Wikipedia is a real good friend.   :o   8)
Logged
Remember; Before you can be old and wise, you must first be young and stupid !
Pages: [1]   Go Up
« previous next »