Author Topic: After waiting 2 1/2 months the package arrived...... (Read 5291 times)

MRieck · « **on:** April 20, 2006, 07:05:20 PM »

Beautiful...even better when you handle and look at them.....

bwaller · « **Reply #1 on:** April 20, 2006, 07:14:01 PM »

Pretty sweet, I thought my Works units were trick.

By the way Mike, SwainTech called and are sending my pistons back tomorrow, went the whole route, crown & skirt coating.

MRieck · « **Reply #2 on:** April 20, 2006, 07:19:31 PM »

Quote from: bwaller on April 20, 2006, 07:14:01 PM

Pretty sweet, I thought my Works units were trick.

By the way Mike, SwainTech called and are sending my pistons back tomorrow, went the whole route, crown & skirt coating.

You won't regret it sir! Good folks there for sure.

MRieck · « **Reply #3 on:** April 20, 2006, 07:33:45 PM »

Quote from: bwaller on April 20, 2006, 07:14:01 PM

Pretty sweet, I thought my Works units were trick.

By the way Mike, SwainTech called and are sending my pistons back tomorrow, went the whole route, crown & skirt coating.

and yes..the Works units are nice too.

Sam Green Racing · « **Reply #4 on:** April 20, 2006, 07:41:45 PM »

What are they for ? that old CB you have

MRieck · « **Reply #5 on:** April 20, 2006, 07:44:20 PM »

Quote from: samcr750 on April 20, 2006, 07:41:45 PM

What are they for ? that old CB you have

Of course! I've worked my ass off this winter Sam and decided to treat her to something special. You should see what I put on the Hayabusa today!

Sam Green Racing · « **Reply #6 on:** April 20, 2006, 07:46:42 PM »

Go on then, then i'll tell you what happened to one over here last week end.

MRieck · « **Reply #7 on:** April 20, 2006, 07:55:03 PM »

Quote from: samcr750 on April 20, 2006, 07:46:42 PM

Go on then, then i'll tell you what happened to one over here last week end.

OK... an Ohlins 3 way adjustable rear shock with remote preload adjuster. It is #$%*'n. Everybody keep in mind .... I work my ass off about 60 hours a week to get this stuff.

Sam Green Racing · « **Reply #8 on:** April 20, 2006, 08:07:11 PM »

OK, i'll let you off this time

Easter Sunday, I traveled to the other side of England to watch a few mates at a drag meeting. (162miles)

3 guys was running 8.6s on Bussas.

One guy, Phil Wood (Woody) put a stonker down with a very fast 60foot and 1/8mile time, then bang

His cam chain snapped, dont they all run at their best just before going BANG

Sam.

MRieck · « **Reply #9 on:** April 20, 2006, 08:57:27 PM »

Quote from: samcr750 on April 20, 2006, 08:07:11 PM

OK, i'll let you off this time

Easter Sunday, I traveled to the other side of England to watch a few mates at a drag meeting. (162miles)

3 guys was running 8.6s on Bussas.

One guy, Phil Wood (Woody) put a stonker down with a very fast 60foot and 1/8mile time, then bang

His cam chain snapped, dont they all run at their best just before going BANG

Sam.

Yes...they do

He was probably using a manual tensioner...I'd bet my berries on it.

scondon · « **Reply #10 on:** April 20, 2006, 09:05:20 PM »

Quote from: MRieck on April 20, 2006, 07:05:20 PM

Beautiful...even better when you handle and look at them.....

Aaaaccccckkkk....my eyes, MY EYES!!!!! OUCH!! Was that my wallet jumping out of my pocket and heading out the door???

mu-u-u-st not spend....must not SPEND! "We...told ourselves we woulds not buy, buy, buy new parts. Keep costs down this time we said, yes? Yes....yes...we remembers...........but oooooooooooohhhhhh

"

You're killin' me Mike

Sam Green Racing · « **Reply #11 on:** April 20, 2006, 09:08:02 PM »

Not sure what sort of tensioner, I havn't heard what damage has been done yet.

Of the other 2, the guy with the fastest time 8.6 dead @ 170mph didn't win

How come you dont drag yours after doing all this work and expence. ?

Sam.

MRieck · « **Reply #12 on:** April 20, 2006, 09:09:36 PM »

Quote from: scondon on April 20, 2006, 09:05:20 PM

Quote from: MRieck on April 20, 2006, 07:05:20 PM
Beautiful...even better when you handle and look at them.....

Aaaaccccckkkk....my eyes, MY EYES!!!!! OUCH!! Was that my wallet jumping out of my pocket and heading out the door???

mu-u-u-st not spend....must not SPEND! "We...told ourselves we woulds not buy, buy, buy new parts. Keep costs down this time we said, yes? Yes....yes...we remembers...........but oooooooooooohhhhhh "

You're killin' me Mike

Sean...if you even just saw the wooden box they were shipped in.... I haven't seen that sort of stuff in at last 25 years. Nice effort on Hyperpro's part. My wife even thought it was really nice!!!

Sam Green Racing · « **Reply #13 on:** April 20, 2006, 09:10:00 PM »

Gee Wizzzz, what's Scon been on ?.....I want some

Sam Green Racing · « **Reply #14 on:** April 20, 2006, 09:12:01 PM »

Go on Mike, you can do it.

MRieck · « **Reply #15 on:** April 20, 2006, 09:12:54 PM »

Quote from: samcr750 on April 20, 2006, 09:08:02 PM

Not sure what sort of tensioner, I havn't heard what damage has been done yet.

Of the other 2, the guy with the fastest time 8.6 dead @ 170mph didn't win

How come you dont drag yours after doing all this work and expence. ?

Sam.

Because it is too short and I don't want to break it.

Seriously I wouldn't mind but the only track is in New Hampshire and I'm so frggin busy Sam. I have to take the Honda up there...and the FJ.

MRieck · « **Reply #16 on:** April 20, 2006, 09:14:39 PM »

Quote from: samcr750 on April 20, 2006, 09:12:01 PM

Go on Mike, you can do it.

Oh boy....I'm an Expert now.

Sam Green Racing · « **Reply #17 on:** April 20, 2006, 09:16:02 PM »

Congrats old chap

scondon · « **Reply #18 on:** April 20, 2006, 09:19:26 PM »

Quote from: samcr750 on April 20, 2006, 09:10:00 PM

Gee Wizzzz, what's Scon been on ?.....I want some

I've just been working in the garage for the first time in months(it seems) and am feeling rather giddy,Sam. Dreaming of what this rusty pile will eventually be. Then Mike has to go and post those beeeyooootiful shocks and the rubber band just snapped

MRieck · « **Reply #19 on:** April 20, 2006, 09:23:17 PM »

Quote from: scondon on April 20, 2006, 09:19:26 PM

Quote from: samcr750 on April 20, 2006, 09:10:00 PM
Gee Wizzzz, what's Scon been on ?.....I want some

I've just been working in the garage for the first time in months(it seems) and am feeling rather giddy,Sam. Dreaming of what this rusty pile will eventually be. Then Mike has to go and post those beeeyooootiful shocks and the rubber band just snapped

I suck....sorry Sean.

Sam Green Racing · « **Reply #20 on:** April 20, 2006, 09:23:50 PM »

How far is New Hampshire, I had a mate that raced there in the 70s. Brian Zeky.

He was from Copake Lake in NYS.

He also raced one of my bikes in the 76 I.O.M TT.

He finished 15th.

Sam.

MRieck · « **Reply #21 on:** April 20, 2006, 09:29:56 PM »

Quote from: samcr750 on April 20, 2006, 09:08:02 PM

Not sure what sort of tensioner, I havn't heard what damage has been done yet.

Of the other 2, the guy with the fastest time 8.6 dead @ 170mph didn't win

How come you dont drag yours after doing all this work and expence. ?

Sam.

and another thing...

You pull the trigger on that Busa and Jesus H Christ....first gear( and second) at 8,000 to 9,000 will start to scare the #$%* of you. My buddies 929 whose head I ported, Akra Evolution system, and custom map does scare me sometimes. Awfully short and high the bike is. I don't like those super snap power wheelies anymore.

MRieck · « **Reply #22 on:** April 20, 2006, 09:32:07 PM »

Quote from: samcr750 on April 20, 2006, 09:23:50 PM

How far is New Hampshire, I had a mate that raced there in the 70s. Brian Zeky.

He was from Copake Lake in NYS.

He also raced one of my bikes in the 76 I.O.M TT.

He finished 15th.

Sam.

For Christsakes....did you tune Hailwoods comeback Ducati.

What was that 1980?

scondon · « **Reply #23 on:** April 20, 2006, 09:33:13 PM »

Quote from: MRieck on April 20, 2006, 09:23:17 PM

Quote from: scondon on April 20, 2006, 09:19:26 PM
Quote from: samcr750 on April 20, 2006, 09:10:00 PM
Gee Wizzzz, what's Scon been on ?.....I want some

I've just been working in the garage for the first time in months(it seems) and am feeling rather giddy,Sam. Dreaming of what this rusty pile will eventually be. Then Mike has to go and post those beeeyooootiful shocks and the rubber band just snapped
I suck....sorry Sean.

In the world of performance parts, ignorance truly IS bliss,haha.

MRieck · « **Reply #24 on:** April 20, 2006, 09:34:49 PM »

Quote from: samcr750 on April 20, 2006, 09:23:50 PM

How far is New Hampshire,
Sam.

A couple of hours from me Sam.

News:

Author Topic: After waiting 2 1/2 months the package arrived...... (Read 5291 times)