« previous next »
Pages: [1]   Go Down

Author Topic: CB400F Dyna Electronic Ignition and 3.0 ohm coil upgrade problems  (Read 962 times)

0 Members and 1 Guest are viewing this topic.

Offline ritchystyxx

  • Full Member
  • *
  • Posts: 1
  • I am The Test Rider.
CB400F Dyna Electronic Ignition and 3.0 ohm coil upgrade problems
« on: May 31, 2011, 05:01:10 PM »
Hi,  Should I expect problems to come up with my electrical system after I install the Dyna DS1-1 Electronic Ignition and 3.0 ohm coils?  Would I need to upgrade other parts of the electrics?  Battery, Fuse box, Rectifier?  Anyone still doing the oil pump mod to increase the oil pressure?  I am looking to see 105mph and with the stock setup, I'm at 101mph so far and am 190lbs.  :D 

Thanks for any help,

Ritchy

PS.  What are the chances that I will see problems with using the 3.0ohm coils vs. the 5.0ohm?
« Last Edit: May 31, 2011, 05:09:13 PM by ritchystyxx »
Logged
"We're not here for a long time, we're here for a good time." -Guy Martin

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,802
Re: CB400F Dyna Electronic Ignition and 3.0 ohm coil upgrade problems
« Reply #1 on: May 31, 2011, 05:40:15 PM »
Did you remove 60 watts of electrical load from the bike to compensate for the extra draw of the Dyna?
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

bollingball

  • Guest
Re: CB400F Dyna Electronic Ignition and 3.0 ohm coil upgrade problems
« Reply #2 on: May 31, 2011, 06:11:26 PM »
Yes you should expect and will have problems. You should have ask sooner. If I were you I would put the coils up for sale and get the 5ohm ones. But that is just me others will say different.
Logged

Offline jaguar

  • Old Timer
  • ******
  • Posts: 2,778
Re: CB400F Dyna Electronic Ignition and 3.0 ohm coil upgrade problems
« Reply #3 on: June 01, 2011, 12:10:40 AM »
why not use the hondaman resistors?
Logged
Pages: [1]   Go Up
« previous next »