Author Topic: Craigslist 750 Cafe, Version 2 on deck (Read 56471 times)

Dyrden · « **on:** June 12, 2011, 07:08:21 PM »

So, I started with a rough running K7.

Untitled by bailey_james62@ymail.com, on Flickr

Took it apart and put stuff in a bucket.

Untitled by bailey_james62@ymail.com, on Flickr

I dont like casting marks.

Untitled by bailey_james62@ymail.com, on Flickr

I do like cool old shocks:

Untitled by bailey_james62@ymail.com, on Flickr

And everyone knows speed holes are cool.

Untitled by bailey_james62@ymail.com, on Flickr

So are shiny parts(not done with these BTW)

Untitled by bailey_james62@ymail.com, on Flickr

Some people think dual carbs are cool(makes it look like a 350 which I like)

Untitled by bailey_james62@ymail.com, on Flickr

But, they dont fit unless...

Untitled by bailey_james62@ymail.com, on Flickr

Youre willing to cut things up, which I am.

Untitled by bailey_james62@ymail.com, on Flickr

Got this in the mail:

Untitled by bailey_james62@ymail.com, on Flickr

Current stuff:
Aluminum Excels out at anodizer getting deep red.
Tank and tail from Benjie
Rearsets TBD
engine degreased but needs more work.

My last build was aluminum but steel throws much more satisfying sparks!!!

Untitled by bailey_james62@ymail.com, on Flickr

kap384@telus.net · « **Reply #1 on:** June 12, 2011, 10:38:00 PM »

Cool start to your thread!

CafeDawg · « **Reply #2 on:** June 12, 2011, 10:50:49 PM »

Yah I'm intrigued. Want to see those twin carbs fitted, never seen that. Is the headlight bucket w/ speedo a Carpy buy? Been thinking about converting to one like that and get rid of the clutter up front. If the CB ends up looking as good as the StreetFighter it will be a real fun build to watch.
Respect
CD

Dyrden · « **Reply #3 on:** June 13, 2011, 08:33:09 AM »

Quote from: CafeDawg on June 12, 2011, 10:50:49 PM

Yah I'm intrigued. Want to see those twin carbs fitted, never seen that. Is the headlight bucket w/ speedo a Carpy buy? Been thinking about converting to one like that and get rid of the clutter up front. If the CB ends up looking as good as the StreetFighter it will be a real fun build to watch.
Respect
CD

Thx. Yes, thats one of Carpys. Ill likely match the paint from the tank to the headlight housing, but need to decide on that first. Im going to run a simple harness and use an RFID keyless ignition that Ill hide in the headlight housing. Trying to keep the bars super clean. I cant wait for the tank and tail so I can actually sit on the bike for the first time and fab up some mounts for rearsets.

immortal · « **Reply #4 on:** June 13, 2011, 09:00:21 AM »

Very nice, love those shocks!

CafeDawg · « **Reply #5 on:** June 13, 2011, 12:51:20 PM »

Sounds good...subscribed!!!

paulh1282 · « **Reply #6 on:** June 14, 2011, 12:50:02 PM »

What 2 carbs are you using to replace the stock 4? I like the idea of that, I have a 650 and just kind of curious. Might like to try that one day, and tell everybody how I got the idea...

zzpete · « **Reply #7 on:** June 14, 2011, 01:48:21 PM »

Cycle X has a dual carb set up!
http://www.cyclexchange.net/Carb%20System%20Comp%20Page.htm

Dyrden · « **Reply #8 on:** June 14, 2011, 03:34:04 PM »

Quote from: zzpete on June 14, 2011, 01:48:21 PM

Cycle X has a dual carb set up!
http://www.cyclexchange.net/Carb%20System%20Comp%20Page.htm

That's them. Usually reserved for choppers with backbones since clearing the stock frame is nearly impossible. Nothing a sawsall, grinder and welder can't fix.

immortal · « **Reply #9 on:** June 16, 2011, 10:16:29 AM »

I'm still drooling over those shocks, are they NOS or did you rebuild them? what model shock are they?..great job!

Dyrden · « **Reply #10 on:** June 16, 2011, 05:23:42 PM »

Quote from: immortal on June 16, 2011, 10:16:29 AM

I'm still drooling over those shocks, are they NOS or did you rebuild them? what model shock are they?..great job!

Thanks! Those are early 80s CB900 rear shocks. And yes, they looked much rougher before I got a hold of them!

70CB750 · « **Reply #11 on:** June 17, 2011, 04:55:45 AM »

Subscribed

Dyrden · « **Reply #12 on:** June 19, 2011, 09:58:25 AM »

Just a little progress this week:

Untitled by bailey_james62@ymail.com, on Flickr

Dyrden · « **Reply #13 on:** June 19, 2011, 06:00:32 PM »

Untitled by bailey_james62@ymail.com, on Flickr

MasterChief750 · « **Reply #14 on:** June 19, 2011, 06:04:08 PM »

awesome work but seems like a lot of work to make some carbs fit

Dyrden · « **Reply #15 on:** June 19, 2011, 07:39:49 PM »

Quote from: MasterChief750 on June 19, 2011, 06:04:08 PM

awesome work but seems like a lot of work to make some carbs fit

Thanks, yea it is a lot of work but I didnt buy it to take short cuts and I wanted to separate it from the sea of other 750 cafes.

immortal · « **Reply #16 on:** June 20, 2011, 10:14:52 AM »

Those CB 900 shocks, you did a great job on! Did you rebuild the shocks and if so where did you find the parts? Also isn't the CB900 shock a little taller than what you had before...I'm thinking of switching from my Asia nitrogen shock to these if I can get the height right and replace the bushings etc. Thanks again its great what you are doing. My build is the Pegasus bike in the project part of the forum.

Dyrden · « **Reply #17 on:** June 20, 2011, 12:28:17 PM »

Quote from: immortal on June 20, 2011, 10:14:52 AM

Those CB 900 shocks, you did a great job on! Did you rebuild the shocks and if so where did you find the parts? Also isn't the CB900 shock a little taller than what you had before...I'm thinking of switching from my Asia nitrogen shock to these if I can get the height right and replace the bushings etc. Thanks again its great what you are doing. My build is the Pegasus bike in the project part of the forum.

Thanks. It is a little taller which will level out the frame(which I like). I did buy new bushings and spent a ton of time cleaning/sanding and then masked and primered and painted the bodies.

immortal · « **Reply #18 on:** June 20, 2011, 01:40:10 PM »

Thanks for the info...great job they look way better than the modern $140.00 Asia nitrogen shocks or the aftermarkets available...although there may be just a little sacrifice in performance. I think I will try eek out a pair to work with.

Dyrden · « **Reply #19 on:** June 27, 2011, 04:16:39 PM »

Got the rear hub looking good today:

Untitled by bailey_james62@ymail.com, on Flickr

70CB750 · « **Reply #20 on:** June 28, 2011, 02:53:08 AM »

You did indeed!

Dyrden · « **Reply #21 on:** June 30, 2011, 05:15:47 PM »

Whats better than velocity stacks? Nothing....

Untitled by bailey_james62@ymail.com, on Flickr

articblue · « **Reply #22 on:** July 01, 2011, 12:16:50 PM »

sweet build so far looking forward to progress

Dyrden · « **Reply #23 on:** July 24, 2011, 07:33:17 PM »

Little more progress:

Untitled by bailey_james62@ymail.com, on Flickr

Dyrden · « **Reply #24 on:** July 24, 2011, 07:35:01 PM »

Tail is out at upholstery, but the tank is nearly done:

Untitled by bailey_james62@ymail.com, on Flickr

News:

Author Topic: Craigslist 750 Cafe, Version 2 on deck (Read 56471 times)