Topic: do a '73 honda cb350f and a '76 honda cb400f have the same carbs?

[jhw_3]

do a '73 honda cb350f and a '76 honda cb400f have the same carbs?  i need carbs for the cb350f and i found carbs for the cb400f.  any help would be appreciated.  thanks.

[Gordon]

Same carbs, different size jets. 

[jhw_3]

is there a way to change the jets?  are the right size jets included with a carb rebuild kit?

[GroovieGhoulie]

The slow jets should screw in and out.  The mains press into the emulsifier tube as I recall.

Mine's jetted the factory 38 slows and 75 (I think) mains.  Dunno what the 350F should be jetted to.

[Jay B]

The slow jets should screw in and out.  The mains press into the emulsifier tube as I recall.

Mine's jetted the factory 38 slows and 75 (I think) mains.  Dunno what the 350F should be jetted to.

A 350f has 35 slow jets. I don't remember the mains either, but they weren't too far off 400 mains as I recall. I've got rejetted 400 carbs on my 350f. If you buy an aftermarket carb kit, take a close look at the needles they supply. I thought the ones I got looked like a different taper then the stock ones so I cleaned up the old ones and reused them.