Author Topic: MORE STOCK THAN NOT - post your pics!! (Read 198726 times)

dsals · « **Reply #975 on:** April 19, 2020, 12:28:29 PM »

Quote from: s7paul on June 14, 2011, 02:05:38 PM

Here's mine. It looks stock except for the braided brake hose & reproduction seat, but hiding under the tank is a Boyer Bransden ignition and Dyna coils, and hiding behind the side panel is a solid state Rectifier/Regulator.

looks great - love it.

mine is close!

34barab · « **Reply #976 on:** April 19, 2020, 06:20:38 PM »

1980 V-Twin

RAFster122s · « **Reply #977 on:** April 20, 2020, 02:37:57 AM »

Nice Deluxe 34barab, 78 cx in my shed...

kap384@telus.net · « **Reply #978 on:** April 20, 2020, 09:42:27 PM »

Quote from: 34barab on April 19, 2020, 06:20:38 PM

1980 V-Twin

Not a SOHC but a SUPER CLEAN CX. Thanks for posting. Loved my GL650I but love my CX650T more.

34barab · « **Reply #979 on:** April 21, 2020, 01:40:30 PM »

Yes. Sorry. I guess it's a SOHV.

Stev-o · « **Reply #980 on:** April 21, 2020, 02:54:06 PM »

Quote from: 34barab on April 21, 2020, 01:40:30 PM

I guess it's ...a SOHV.

Wouldnt it be a DOHV?!

kap384@telus.net · « **Reply #981 on:** April 22, 2020, 12:08:48 PM »

Quote from: Stev-o on April 21, 2020, 02:54:06 PM

Quote from: 34barab on April 21, 2020, 01:40:30 PM
I guess it's ...a SOHV.

Wouldnt it be a DOHV?!

Actually QOHV (Quad - 4 valves per cylinder by pushrod)

34barab · « **Reply #982 on:** April 22, 2020, 03:03:16 PM »

The only thing I’m sure of is that it has push rods.

. I haven’t spent any time reading the manual yet.

Stev-o · « **Reply #983 on:** April 22, 2020, 06:04:06 PM »

Quote from: kap384 on April 22, 2020, 12:08:48 PM

Quote from: Stev-o on April 21, 2020, 02:54:06 PM
Quote from: 34barab on April 21, 2020, 01:40:30 PM
I guess it's ...a SOHV.

Wouldnt it be a DOHV?!

Actually QOHV (Quad - 4 valves per cylinder by pushrod)

Yeah, good one!

RAFster122s · « **Reply #984 on:** April 23, 2020, 12:29:04 AM »

Single pushrod with forked rocker arms actuating two valves...

kawabunga · « **Reply #985 on:** April 24, 2020, 07:51:44 AM »

My '75 550F. Mostly stock, but some upgrades/updates of worn parts. More of a resto-mod than a restoration. My grandparents purchased this bike new and it's been in my family this entire time. It sat for over 2 decades and I took it upon myself to get her back on the road. I love it!

Stev-o · « **Reply #986 on:** April 24, 2020, 08:50:47 AM »

Quote from: kawabunga on April 24, 2020, 07:51:44 AM

My grandparents purchased this bike new and it's been in my family this entire time. It sat for over 2 decades and I took it upon myself to get her back on the road.

Great story!

MauiK3 · « **Reply #987 on:** April 24, 2020, 09:01:31 AM »

More photos!
Very nice.

kap384@telus.net · « **Reply #988 on:** April 27, 2020, 02:06:43 PM »

Quote from: kawabunga on April 24, 2020, 07:51:44 AM

My '75 550F. Mostly stock, but some upgrades/updates of worn parts. More of a resto-mod than a restoration. My grandparents purchased this bike new and it's been in my family this entire time. It sat for over 2 decades and I took it upon myself to get her back on the road. I love it!

Great job keeping it in the family

Lucien Harpress · « **Reply #989 on:** April 30, 2020, 06:46:32 PM »

My current project. It's a bit of a Frankenbike- the frame is a 76 (I think), the motor is out of a 73, and most of the bits and styling are from a 72, with the paint job of a 73. It's a bit of a mess, but everything is stock. I've had it on the road, and she goes pretty good, but I'm fairly certain the tires are original, so I didn't go far.

And here it is with another one of my babies, and a nice bracket to the "Japanese Standard Motorcycle" era, my 1980 KZ1300.

kap384@telus.net · « **Reply #990 on:** May 20, 2020, 10:16:35 AM »

Quote from: Lucien Harpress on April 30, 2020, 06:46:32 PM

My current project. It's a bit of a Frankenbike- the frame is a 76 (I think), the motor is out of a 73, and most of the bits and styling are from a 72, with the paint job of a 73. It's a bit of a mess, but everything is stock. I've had it on the road, and she goes pretty good, but I'm fairly certain the tires are original, so I didn't go far.

And here it is with another one of my babies, and a nice bracket to the "Japanese Standard Motorcycle" era, my 1980 KZ1300.

Lookin' good!

Doobie · « **Reply #991 on:** May 20, 2020, 10:46:58 AM »

I finished my winter project the other day and fired it up for the first time. Not entirely stock but a nice bike (only 62XX miles):

kap384@telus.net · « **Reply #992 on:** May 20, 2020, 10:55:25 AM »

Great to see a clean, mostly stock F3! Love it! So other than the pipe, what isn't stock?

Doobie · « **Reply #993 on:** May 20, 2020, 11:03:46 AM »

Quote from: kap384 on May 20, 2020, 10:55:25 AM

Great to see a clean, mostly stock F3! Love it! So other than the pipe, what isn't stock?

Mainly the exhaust but also an oil pressure gauge, steering damper, rear shocks and chrome gauge covers.

kap384@telus.net · « **Reply #994 on:** May 20, 2020, 11:19:19 AM »

Quote from: Doobie on May 20, 2020, 11:03:46 AM

Mainly the exhaust but also an oil pressure gauge, steering damper, rear shocks and chrome gauge covers.

Ah. Zooming in closer I see the shocks, steering damper, oil gauge and gauge covers. Still, a super clean looking original!

Stev-o · « **Reply #995 on:** May 20, 2020, 01:22:35 PM »

Quote from: Doobie on May 20, 2020, 10:46:58 AM

I finished my winter project the other day and fired it up for the first time. Not entirely stock but a nice bike (only 62XX miles):

Very nice! Nominating you for BOTM!

Go here to accept once it has been seconded...

http://forums.sohc4.net/index.php/topic,180400.new.html#new

kap384@telus.net · « **Reply #996 on:** May 20, 2020, 01:38:29 PM »

I seconded

Stev-o · « **Reply #997 on:** May 20, 2020, 01:41:23 PM »

Quote from: kap384 on May 20, 2020, 01:38:29 PM

I seconded

Need to do it in the BOTM thread....

http://forums.sohc4.net/index.php/topic,180400.new.html#new

MauiK3 · « **Reply #998 on:** May 20, 2020, 03:30:22 PM »

What a beauty!
How much HP were they making at that point? Very different carbs than my K3
I like the exhaust on it, seems to go well.

Doobie · « **Reply #999 on:** May 21, 2020, 12:42:38 AM »

Quote from: MauiK3 on May 20, 2020, 03:30:22 PM

What a beauty!
How much HP were they making at that point? Very different carbs than my K3
I like the exhaust on it, seems to go well.

I've read 58hp at 8,000 rpm, about 10% higher than the K bikes (weighs 10 lbs more than K bikes too).

News:

Author Topic: MORE STOCK THAN NOT - post your pics!! (Read 198726 times)