« previous next »
Pages: [1]   Go Down

Author Topic: Anyone ever cut there fender?  (Read 2629 times)

0 Members and 3 Guests are viewing this topic.

Offline Ryan66

  • Hot Shot
  • ***
  • Posts: 301
Anyone ever cut there fender?
« on: June 17, 2011, 03:29:50 PM »
I was skimming build threads and saw a cut front fender on a 750. Id like to the same to my 550. What is the best route to go about this? Im thinking maybe a band saw then shape it with a grinder? i have access to both. But will it mess up the chrome at all?
Logged
1976 CB550k (cafe project)

Offline WarwickE36

  • Expert
  • ****
  • Posts: 761
Re: Anyone ever cut there fender?
« Reply #1 on: June 17, 2011, 03:43:45 PM »
I cut my rear and front.  Rear I cut on the seat side so it would retain its beveled edge... its impossible to do this on the front so i just cut it carefully.  I drew it with a sharpie first and then cut it with a air powered cutting wheel, using the thinnest 3M cutting wheel available i think its like 3/32" but dont quote me on it. 

After cut mock up...


Painted an mounted...


Rear (for now...I will be filling the holes and repainting when I get my seat/integrated taillight assembly)


with the rear just drill new holes...I used the 2 hole already under the seat and got through bolts that would fit.  Voila super easy.
Logged
" Why does anyone get offended by what someone does to their own bike? I dont get it. "

You made me think about it after I cheered knowing someone else would like to know what these control freaks are up to.
 Every time any owner strips whatever precious Honda part the horrified purists parts go up in value. That's not the part that bothers them.
 What bothers them is they sat up late at night, their breast full of wonder and estrogen, unable to sleep, dreaming about their lovely darling and all her glory... and next thing you know someone else doesn't share their emotional deluge and their reaction is they must spread their mind museum as far as they possibly can, taking over as much of the real world as possible.

Drink fast, drive slow, but ride it like you stole it

1974 Cb550 with style
2004 SV650s

Offline anotherCB

  • Hot Shot
  • ***
  • Posts: 407
Re: Anyone ever cut there fender?
« Reply #2 on: June 17, 2011, 03:45:31 PM »
Angle grinder with a cutting wheel. Traced the shape I wanted and marked with a sharpie. I did not use tape on the side of the cut that stayed, which resulted in me messing up the chrome when I "slipped" with the cutting wheel. I also used the cutting wheel to smooth the edges.
Logged
1978 CB750K, 2016 R1200 GS/LC, 1973 R75/5

Offline Ryan66

  • Hot Shot
  • ***
  • Posts: 301
Re: Anyone ever cut there fender?
« Reply #3 on: June 17, 2011, 03:48:22 PM »
Ya warwick your front fender is exactly what i want to do. I even like the rear too. IMO it looked better chromed but its your bike. How did you prep the chrome to paint it?
Logged
1976 CB550k (cafe project)

Offline WarwickE36

  • Expert
  • ****
  • Posts: 761
Re: Anyone ever cut there fender?
« Reply #4 on: June 17, 2011, 03:51:12 PM »
My chrome was super pitted.  I liked it better chrome too but there was no saving it.  I hit it with a wire wheel and got everything I could out and it was still less than desirable...  I then took sandpaper and went to town... quick spray of supposed rust neutralizing primer (dont believe the hype)... then paint.
Logged
" Why does anyone get offended by what someone does to their own bike? I dont get it. "

You made me think about it after I cheered knowing someone else would like to know what these control freaks are up to.
 Every time any owner strips whatever precious Honda part the horrified purists parts go up in value. That's not the part that bothers them.
 What bothers them is they sat up late at night, their breast full of wonder and estrogen, unable to sleep, dreaming about their lovely darling and all her glory... and next thing you know someone else doesn't share their emotional deluge and their reaction is they must spread their mind museum as far as they possibly can, taking over as much of the real world as possible.

Drink fast, drive slow, but ride it like you stole it

1974 Cb550 with style
2004 SV650s

Offline Ryan66

  • Hot Shot
  • ***
  • Posts: 301
Re: Anyone ever cut there fender?
« Reply #5 on: June 17, 2011, 03:53:44 PM »
Ya im thinking with these bikes a bench grinder with wire wheel and a buffing wheel is a good investment. ANother question did you paint your headers? my headers were at one time black and the pipes are black so id like to repaint mine and wondering what to use? Grill paint?
Logged
1976 CB550k (cafe project)

Offline WarwickE36

  • Expert
  • ****
  • Posts: 761
Re: Anyone ever cut there fender?
« Reply #6 on: June 17, 2011, 03:54:53 PM »
Word of advice, go a little longer on the motor side on the front fender unless youre completely cool with washing grit and grime off your motor frequently...  My front fender is more for looks than any function at this point.
Logged
" Why does anyone get offended by what someone does to their own bike? I dont get it. "

You made me think about it after I cheered knowing someone else would like to know what these control freaks are up to.
 Every time any owner strips whatever precious Honda part the horrified purists parts go up in value. That's not the part that bothers them.
 What bothers them is they sat up late at night, their breast full of wonder and estrogen, unable to sleep, dreaming about their lovely darling and all her glory... and next thing you know someone else doesn't share their emotional deluge and their reaction is they must spread their mind museum as far as they possibly can, taking over as much of the real world as possible.

Drink fast, drive slow, but ride it like you stole it

1974 Cb550 with style
2004 SV650s

Offline Greggo

  • Somebody's
  • Old Timer
  • ******
  • Posts: 4,164
  • Helmets Save Lives. Period.
Re: Anyone ever cut there fender?
« Reply #7 on: June 17, 2011, 04:23:33 PM »
Wish I could take credit for this idea...Cut off the rolled front edge that's shaped from the factory and use it to trace your cut.

Domer gets the credit there.
Logged

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: Anyone ever cut there fender?
« Reply #8 on: June 17, 2011, 08:48:22 PM »
I used a Dremel to cut off the mangled front section of the front fender on my 550.  Went through that steel like a hot knife through butter, and it was a nice, clean cut, too, so no finish work needed. 
Logged

Offline Roach

  • Expert
  • ****
  • Posts: 760
Re: Anyone ever cut there fender?
« Reply #9 on: June 18, 2011, 08:13:54 AM »
Quote from: Greggo on June 17, 2011, 04:23:33 PM
Wish I could take credit for this idea...Cut off the rolled front edge that's shaped from the factory and use it to trace your cut.

Domer gets the credit there.

agreed 100% best way to get the right shape
Logged
1978 CB550K Cafe Racer

bollingball

  • Guest
Re: Anyone ever cut there fender?
« Reply #10 on: June 18, 2011, 08:47:31 AM »
Will it mess up the chrome at all? are you kidding?? :o Hit the hood of your car with a hammer will it mess it up at all ???

Gordon Did I miss read was it steel or chrome he was asking about?

Steel work and Chrome not the same thing IMHO

                        Ken  I'm sorry if I miss read.
« Last Edit: June 18, 2011, 08:59:27 AM by bollingball »
Logged

Offline domer

  • I got a bridge for sale, and it was built by a
  • Expert
  • ****
  • Posts: 902
  • everything is better with a bag of weed!
Re: Anyone ever cut there fender?
« Reply #11 on: June 18, 2011, 10:47:58 AM »
Quote from: Greggo on June 17, 2011, 04:23:33 PM
Wish I could take credit for this idea...Cut off the rolled front edge that's shaped from the factory and use it to trace your cut.

Domer gets the credit there.

yup, thats the way to do it... saving the chrome, well if you can cut it perfectly (doubt it). other than that, sandblast and paint. or re-chrome it if you choose...

Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Anyone ever cut there fender?
« Reply #12 on: June 18, 2011, 11:09:10 AM »
Did mine with a hack saw. No chrome chipping, but the saw wandered up out of the groove once and marked up the chrome, so be careful. I thought it was a pretty good job.

The edge will rust, but easy to dress up with when doing the weekly polish with Turtle Wax Chrome Polish/Rust Remover.

Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: Anyone ever cut there fender?
« Reply #13 on: June 19, 2011, 06:20:24 AM »
Quote from: bollingball on June 18, 2011, 08:47:31 AM
Gordon Did I miss read was it steel or chrome he was asking about?

Steel work and Chrome not the same thing IMHO

                        Ken  I'm sorry if I miss read.

The fenders aren't chrome.  They're chrome-plated steel.  It's the steel you're cutting and it's the chrome plating you're trying not to mess up while doing it.  A dremel with a cut-off wheel will easily cut the steel without chipping the chrome plating along the edge of the cut, which is why I suggested it. 
Logged

Offline WarwickE36

  • Expert
  • ****
  • Posts: 761
Re: Anyone ever cut there fender?
« Reply #14 on: June 19, 2011, 11:30:11 AM »
Domer... is that your bike in this picture?  My bike is earily similar to it and I have been looking for a seat to fit the look... If this is your bike, where did you get that seat??
Logged
" Why does anyone get offended by what someone does to their own bike? I dont get it. "

You made me think about it after I cheered knowing someone else would like to know what these control freaks are up to.
 Every time any owner strips whatever precious Honda part the horrified purists parts go up in value. That's not the part that bothers them.
 What bothers them is they sat up late at night, their breast full of wonder and estrogen, unable to sleep, dreaming about their lovely darling and all her glory... and next thing you know someone else doesn't share their emotional deluge and their reaction is they must spread their mind museum as far as they possibly can, taking over as much of the real world as possible.

Drink fast, drive slow, but ride it like you stole it

1974 Cb550 with style
2004 SV650s

Offline domer

  • I got a bridge for sale, and it was built by a
  • Expert
  • ****
  • Posts: 902
  • everything is better with a bag of weed!
Re: Anyone ever cut there fender?
« Reply #15 on: June 19, 2011, 05:47:53 PM »
yup, my bike.... Carpys rocket four seat. does the job, there are a few things i dont like about it but i think that would go with any fiberglass seat (flex, the fun of mounting, etc..) the cover is just a expensive kneeling pad i cut up and wrapped with black vinyl.
Logged

Offline Johnny5

  • Master
  • *****
  • Posts: 1,593
    • CB350F build thread
Re: Anyone ever cut there fender?
« Reply #16 on: June 19, 2011, 06:04:51 PM »
I have an extra front fender and have been kicking around the idea to use it for a shorter fender. I too did the rolled edge saving trick on the rear about. About halfway down from this page you can see what I did about 3 years ago. http://forums.sohc4.net/index.php?topic=42331.50

I like the look of the short front, but like the function of the full size too. Ugh.

Logged
www.kerosenecycles.com
1971 CB350
1973 CB350F
2006 Harley Springer Classic

Offline Ryan66

  • Hot Shot
  • ***
  • Posts: 301
Re: Anyone ever cut there fender?
« Reply #17 on: June 23, 2011, 07:17:25 PM »

Logged
1976 CB550k (cafe project)

Offline Johnny5

  • Master
  • *****
  • Posts: 1,593
    • CB350F build thread
Re: Anyone ever cut there fender?
« Reply #18 on: June 23, 2011, 07:27:01 PM »
Logged
www.kerosenecycles.com
1971 CB350
1973 CB350F
2006 Harley Springer Classic
Pages: [1]   Go Up
« previous next »