Topic: sparkplug wires

[neilc]

going to relocate my coils,i believe they are goldwing coils because they screw into the coils,anyway not sure what mill 7 or 8 mill wire,see pic,also best place to get em

[dusterdude]

7

[bjbuchanan]

7 mil. What I do is pick up  accel super stock wires from Autozone. About 24$ but you get enough for approx. 4 cb's lol

Other guys talk about tractor supply places and finding great deals for non suppression core wires but for me a quick shot to AZ was easiest and cheapest. You need solid core, stranded core, something with copper in the middle. No type of graphite or spiral or any suppression wire that is why you grab super stock or the like

[dusterdude]

Napa will cut it off a roll for you

[neilc]

Thanks

[dusterdude]

You're welcome

[strynboen]

thek the ohm in this coils...think they are for elektronic ignision..not platin knickers..they are lower ohm and drav more power..then the standart coils..
my cbx  1000 use the schrev in type..but the old 550 used the sealed vire type

[neilc]

it is a electronic ignition,so does that make a difference with which wires to use?how would i check ohms on the coils?I was just going to match up the coils wires that are on their now(bring one to auto zone for comparison)

[dusterdude]

Elec ign doesnt matter on the wires