« previous next »
Pages: [1]   Go Down

Author Topic: no power cam timing??  (Read 591 times)

0 Members and 1 Guest are viewing this topic.

Offline painters cafe

  • Full Member
  • *
  • Posts: 45
no power cam timing??
« on: June 27, 2011, 07:18:03 PM »
Hey guys I got this chopper and it ran very very well. And one day I mist a gear and smacked a valve and took the bike to a guy and now the bike don't run near as good just don't pull as hard. He told me he put the bike back to stock. So I played with timing and still just can't get that power back. So I'm asking was the cam timing set defferent??? And if so I want to move it back. Do I turn cam 1 tooth clock wize?? Or counter clock?? And yes the motors fine didn't hurt it. Thanks sorry for the book.
« Last Edit: June 27, 2011, 07:40:06 PM by painters cafe »
Logged
1972 cb750p 1970 cb750 chopper 1976 ss750 1974 cb750 1975 cb750 1972 cb750 1974 750 72 cb750 1971 cb750 1976 cb750 cafe 1977 cb750 1972 cb350-4 1973 cb350-4 1972 cb350 1974 cb350 1970 cl175 1970 cb450 1972 cl450 1972 cl350 1972 cb550 2- 1974 cb360 1971 cl125 1975 cb125 some of the hondas i had

Offline painters cafe

  • Full Member
  • *
  • Posts: 45
Re: no power cam timing??
« Reply #1 on: June 28, 2011, 05:24:40 AM »
Or you think he didn't put motor back together right? He said he didn't turn the mag or take the mag off the bike. O one more thing I just put new springs in it I was thinking my springs might be weak. That didn't help power
Logged
1972 cb750p 1970 cb750 chopper 1976 ss750 1974 cb750 1975 cb750 1972 cb750 1974 750 72 cb750 1971 cb750 1976 cb750 cafe 1977 cb750 1972 cb350-4 1973 cb350-4 1972 cb350 1974 cb350 1970 cl175 1970 cb450 1972 cl450 1972 cl350 1972 cb550 2- 1974 cb360 1971 cl125 1975 cb125 some of the hondas i had
Pages: [1]   Go Up
« previous next »