I'm finally at the stage of getting my wiring back on my bike and I'm running into a few issues with where wires go. Its a 74 cb550. With the wiring block removed from the bike, I'm cleaning up some of the nasty wires that the previous owner attempted to repair... As is, I need some help with the following wires:
From the solenoid, I have a large gauge wire that goes to the battery. There is also a red wire that goes to one of the plugs. The other has a spade connector on it. I have no idea where that goes.
At the bottom of the whole unit is a flat little part (regulator? recitfier?) with one red wire coming off it that also has a spade connector on it. Do those two connect?
And lastly, on the back there is a clump of wires. I have a green wire with a 90 degree spade connector on it that isn't connected to anything.
If i could get some help with those three wires, I think I'm about set. Thanks in advance!
For a guy that has rewired cars from scratch, this is humbling... Wiring bikes is a whole new deal for me, so knowing what part is what is much different!
