« previous next »
Pages: [1]   Go Down

Author Topic: big bump at speed - what did I break?  (Read 1330 times)

0 Members and 1 Guest are viewing this topic.

Offline c(b)hris

  • Enthusiast
  • **
  • Posts: 243
big bump at speed - what did I break?
« on: June 28, 2011, 09:37:56 PM »
75 CB550K

I was riding on the interstate at about 75mph and hit a huge bump.  It felt like the bike came off the ground.  Now my steering doesn't feel so stable.  I rebuilt the forks and replaced the fork seals about 1800 miles ago.  What should I check besides alignment?  Could I have blown a fork seal?  I don't see fork oil leaking anywhere, but the front feels 'squishier' than before.  When I coast down to the end of my driveway, when I hit the brakes I can tell the forks are compressing, where as before it wouldn't have been noticeable.  Any advice is appreciated, thanks.
Logged
75 CB550
74 CB750

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: big bump at speed - what did I break?
« Reply #1 on: June 29, 2011, 12:03:28 AM »
You may be just imagining the compression thing, all suspensions compress under brakes and even if you didn't notice it it definitely happens. Under the weight of a 750 you will experience almost full suspension travel even at slow speed when applying the front brake to a dead stop. Your suspension would have bottomed out when hitting the bump, maybe even jarring your wrists, this has happened to me before as well, as long as you have checked everything and its all still straight and  all bolts are tight, you should be ok. Just check the clamps for any fractures.
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,275
  • Ride like you're invisible
Re: big bump at speed - what did I break?
« Reply #2 on: June 29, 2011, 05:52:24 AM »
Check the rim too, it could have bent but I doubt it...Larry
Logged

Offline Pinhead

  • Master
  • *****
  • Posts: 1,818
  • 1979 CB652-ST
Re: big bump at speed - what did I break?
« Reply #3 on: June 29, 2011, 10:12:03 PM »
Make sure you didn't crack the triple trees.
Logged
Doug

Click --> Cheap Regulator/Rectifier for any of Honda's 3-phase charging systems (all SOHC4's).

GM HEI Ignition Conversion

Quote from: TwoTired
By the way, I'm going for the tinfoil pants...so they can't read my private thoughts.
:D

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,842
Re: big bump at speed - what did I break?
« Reply #4 on: June 30, 2011, 03:15:26 AM »
Do you have the stock ball bearings or tapered roller bearings in the steering head?  I can see a big bump settling 'em in significantly or possibly damaging 'em(although that wouldn't explain the forks compressing easier)  Do the steering adjustement in the manual where you jack the front end off the ground and adjust the steering stem top nut with a spanner.  If when you tighten the nut, the steering gets seriously notchy or bindy(is that a word?), I bet you damaged your bearings or races...
Logged
If it works good, it looks good...

Offline Hush

  • Finally they realise that I am an
  • Really Old Timer ...
  • *******
  • Posts: 6,761
  • "Lady, I've heard it all before"!
Re: big bump at speed - what did I break?
« Reply #5 on: June 30, 2011, 03:36:58 AM »
If you have to old roller bearings still in there you can split them like peas if the steering nut is not torqued correctly.
But I'd be looking for any stress fractures esp at the bottom of the steering stem, these have been shown to be fractured on quite a few 750's on here when forum members have bought bikes to restore.
Logged
I think the thing I most like about motorcycling is the speed at which my brain must process information at to avoid the numb skulls who are eating pies, playing the ukulele, applying make-up etc in the comfort of their airconditioned armchairs as they make random attempts to kill me!!!!!!!

Offline fmctm1sw

  • Old Timer
  • ******
  • Posts: 3,042
Re: big bump at speed - what did I break?
« Reply #6 on: June 30, 2011, 04:16:28 PM »
Quote from: Pinhead on June 29, 2011, 10:12:03 PM
Make sure you didn't crack the triple trees.

+1.  Top clamp.  I broke mine hitting a bump ...
Logged
Quote from: 754
Dude is that a tire ? or an O-ring..??

Quote from: inkscars
This is not a pod thread
This is not a #$%* on my vacuum gauges thread
This is a help or GTFO thread.

1973 CB350F
1973 CB350G
1975 CB550K
1983 GL650I
1973 CB750K3 (http://forums.sohc4.net/index.php?topic=92888.0)
1984 Kawasaki KLT-250 (AKA 3 wheeler of death)
1994 Honda TRX300
1999 Honda TRX250

Offline c(b)hris

  • Enthusiast
  • **
  • Posts: 243
Re: big bump at speed - what did I break?
« Reply #7 on: June 30, 2011, 04:27:06 PM »
top clamp looks okay.
tapered roller bearings already installed.
it felt trustier today, but I wonder if Im just getting more used to it.
I also never noticed the bike going down as much in the back when I sit on it as I do now.  Maybe I should just lay off the fast food.
Logged
75 CB550
74 CB750

Offline Jim F

  • Need a bigger house for more toys
  • Master
  • *****
  • Posts: 1,887
  • go baby go
Re: big bump at speed - what did I break?
« Reply #8 on: June 30, 2011, 04:54:06 PM »
Just a thought but maybe you collapsed a spring in your forks?
Logged
2002 RC51 1000 (SP2)
1983 GS1100EC Suzuki
2002 998 Dukati (Customers Bike)
1992 KTM500 2 stroke
1975 CB750/836 Honda
1978 GS750/840 Suzuki

Offline donpark1086

  • Full Member
  • *
  • Posts: 93
Re: big bump at speed - what did I break?
« Reply #9 on: June 30, 2011, 06:01:43 PM »
Don't ride it until the problem is diagnosed and fully corrected.  Be safe.
Logged

Offline Hush

  • Finally they realise that I am an
  • Really Old Timer ...
  • *******
  • Posts: 6,761
  • "Lady, I've heard it all before"!
Re: big bump at speed - what did I break?
« Reply #10 on: July 02, 2011, 11:34:50 AM »
I would ride it carefully, maybe it is a case of getting used to it after mods.
Logged
I think the thing I most like about motorcycling is the speed at which my brain must process information at to avoid the numb skulls who are eating pies, playing the ukulele, applying make-up etc in the comfort of their airconditioned armchairs as they make random attempts to kill me!!!!!!!

Offline crazypj

  • I'm brill, me
  • Old Timer
  • ******
  • Posts: 4,467
  • first 100,000 miles. 1977 CB550F
Re: big bump at speed - what did I break?
« Reply #11 on: July 02, 2011, 12:04:56 PM »
First, did anyone read initial post?
ITS A 550  ::)
 I beat the hell out of mine, including taking it around a motocross course on more than one occasion   ;)
(I subscribe to the 3'R's', ride it, reck it (sic), repair it  ;D )
 Anyone who broke a top yoke hitting a bump either didn't have things tightened or hit something line a 6" kerb bending forks backwards.
 It's more likely things were not lined up right, they are now so forks are actually operating as they should.
« Last Edit: July 02, 2011, 12:07:08 PM by crazypj »
Logged
I fake being smart pretty good
'you can take my word for it or argue until you find out I'm right'

Offline Hush

  • Finally they realise that I am an
  • Really Old Timer ...
  • *******
  • Posts: 6,761
  • "Lady, I've heard it all before"!
Re: big bump at speed - what did I break?
« Reply #12 on: July 03, 2011, 09:43:42 AM »
550/750 big difference not, forks are forks, steering stems are steering stems. ;D
Logged
I think the thing I most like about motorcycling is the speed at which my brain must process information at to avoid the numb skulls who are eating pies, playing the ukulele, applying make-up etc in the comfort of their airconditioned armchairs as they make random attempts to kill me!!!!!!!

Offline crazypj

  • I'm brill, me
  • Old Timer
  • ******
  • Posts: 4,467
  • first 100,000 miles. 1977 CB550F
Re: big bump at speed - what did I break?
« Reply #13 on: July 03, 2011, 04:51:12 PM »
About a 100lbs, with momentum, BIG difference
Logged
I fake being smart pretty good
'you can take my word for it or argue until you find out I'm right'
Pages: [1]   Go Up
« previous next »