« previous next »
Pages: [1]   Go Down

Author Topic: Push button wire is disconnected in housing, Can bike be set to just kick start?  (Read 398 times)

0 Members and 1 Guest are viewing this topic.

Offline AjG

  • 2 Old Honda Fours and a 500 Twin
  • Full Member
  • *
  • Posts: 32
  • 750 SOHC(s)/500t DOHC
Push button wire is disconnected in housing, Can bike be set to just kick start?
« on: July 07, 2011, 08:34:55 AM »
In right hand control handle the wires have come detached from push button. The solder points are pretty tiny and I'm not sure I can fix that, but I wonder if I can have the bike set to just kick start  rather than electric.

Logged

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: Push button wire is disconnected in housing, Can bike be set to just kick start?
« Reply #1 on: July 07, 2011, 08:37:22 AM »
You don't need to "set" anything.  Just use the kick-start. 

You can remove the starter motor if you want to, but you'll need to plug the hole it leaves. 
Logged
Pages: [1]   Go Up
« previous next »