Author Topic: Speedometer drive oil seal part number.  (Read 2455 times)

0 Members and 1 Guest are viewing this topic.

Offline CycleRanger

  • Snarky comment about being an
  • Old Timer
  • ******
  • Posts: 4,708
  • Local Shop Manual Advocate
Speedometer drive oil seal part number.
« on: July 10, 2011, 08:05:00 pm »
The oil seal for the speedometer drive isn't listed as a separate part on the fiche.

What you need is a Metric Oil Shaft Seal 34 x 48 x 07 Double Lip.
Do you have a copy of the Shop Manual?
http://www.honda4fun.com/materiale-documentazione-tecnica/shop-manual
CB750K5        '79 XL250s     CL350K3
CB750K3        '76 XS650      '76 CJ360T

Offline skamagedon

  • Mad Scientist-Gearhead
  • Hot Shot
  • ***
  • Posts: 295
  • My other car is a motorcycle
    • Arcade and pinball repair
Re: Speedometer drive oil seal part number.
« Reply #1 on: July 31, 2011, 09:44:40 am »
thank you
1976 CB550 mutt "Tiger Pain"
(stock carb setup, unifilter, 4-2 baffled)
1976 CB360T "Resto Wifebike...wink wink"
Hot glue is your friend

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,717
Re: Speedometer drive oil seal part number.
« Reply #2 on: August 18, 2011, 12:01:23 pm »
Oil seals and bearing are all available at most bearing supply houses in metric or SAE.
Cost is a lot less than HONDA.