Author Topic: 1976 CB750 Project bike (Read 1516 times)

anotherknowitall · « **on:** July 11, 2011, 04:36:19 PM »

Going to see if some of the pics post if they do I'll keep posting.

anotherknowitall · « **Reply #1 on:** July 11, 2011, 04:40:24 PM »

SUCCESS! lol ok no heres the rest.

This is how the bike first was when I got it. Up above I started undressing the old girl.

Heres the front fork before I went to work on it.

Here it is after

anotherknowitall · « **Reply #2 on:** July 11, 2011, 04:42:32 PM »

I wanted to keep this on the bike but it was too old.

Headlamp bucket.

anotherknowitall · « **Reply #3 on:** July 11, 2011, 04:59:29 PM »

Couldnt take the back wheel out, manual just kept telling me to pull it out but the bike wasnt cooperating. Primed it like 5 coats of rustoleum paint.

Oil holdermathinger.

look at these filthy carbs

anotherknowitall · « **Reply #4 on:** July 11, 2011, 05:02:26 PM »

The gas tank has really pissed me off a bit because it wouldnt be the way I wanted it to be.

So.....I covered it in bondo..

Pipes before and after

anotherknowitall · « **Reply #5 on:** July 11, 2011, 05:10:41 PM »

Gas tank still in process...

Front Rim- NOW

oh and in case you were wondering yea I did get the rear tire off.

fender and top tree primed

Engine pulled

anotherknowitall · « **Reply #6 on:** July 11, 2011, 05:18:35 PM »

Ok there so were caught up so far. Most of the body parts have been cleaned, sanded, recleaned, primed, painted and are sitting around waiting for me to paint the frame. I should take pics of the parts now, but I'll wait till my new stainless steel bolts come in to remount everything. Im afraid to even look at the rear tire, but pretty so I'll get to it. very very slowly swapping out the little things like o-rings, bearings, gaskets, AND RUSTED/STRIPPED BOLTS.