Topic: The Abomination thread!

[Terry in Australia]

I wonder if there's a generic trike kit out there? That one looks very professional. I wouldn't mind a trike especially for when I get older and can't hold a big bike up any more. My only dislike (apart from their choice of bike) is the width, I'd like a narrower trike, I think?

[grcamna2]

I wonder if there's a generic trike kit out there? That one looks very professional. I wouldn't mind a trike especially for when I get older and can't hold a big bike up any more. My only dislike (apart from their choice of bike) is the width, I'd like a narrower trike, I think?

Terry,I don't think that GZ250 cycle has enough 'beans' to power a trike.A 750 would work well for that;it looks like a stable platform

[ekpent]

 For sale locally ($700.00). Do you think there is any chance the owner did that custom paint job himself ??  You have to wonder if it was stolen or Meth is truly a terrible substance   

[rb550four]

  There's a guy who made that bike his own. No factory paint job for him. It's refreshing to see colors other than flat black, but I find it alarming that those colors were chosen instead. On a positive note, this machine should survive years longer in an outdoor storage situation than others that have been left "untreated".

[RAFster122s]

Maybe it is plastidip spray? That would make it easier to undo since it peels off

[ekpent]

 Looking at the over spray on the tires I doubt it.

[gpzkat]

I'm not sure this is quite abomination territory, but it is definitely an interesting description. And a ripoff.  Being snarky below, oops.

https://orangecounty.craigslist.org/mcy/d/costa-mesa-1972-honda-cb350-custom/7381263938.html

I have put tons of custom work into this bike
..... I could do that in a weekend.  Maybe an extra day to bend the licence plate like that.

I just had high-performance Jetted carbs put on it.
.oooh, high performance, and even jetted!

Custom cone engineering exhaust
...it sort of looks like #$%*e.

Custom reupholstered the seat leather
.... I'd wager it's made of vinyl.  But you're the bike guru!

I put a great condition rust free tank on it

Custom clubman style handle bars
.... installed like Rudy Guiliani wears his iPods - nice!

Custom engine paint matte black with high heat paint
... How custom is a can of paint you buy for $9.99?

The carbs were tuned this week
... impressive.  If they were tuned last week, I'd be out.

The battery box is completely custom to create a more desecrate battery under the seat.
.... I think such desecration is not a good look.

The frame is in great condition no rust and has been outed recently
.... I'm not sure if the frame is happy about being outed.

[ekpent]

 All that greatness for only $4450.00. Looks barely street legal to drive. Luckily Michigan doesn't do inspections yet.

[rb550four]

  $4450..... So all this time I've been tracking down parts so my bikes will be complete if I ever sell one. So  350 is a new sales model maybe we should all be getting in on..... selling most of the parts off the bike to guys like us before you sell  the roller with an uncomfortable seat, and a 75k engine, for big dollars?  Hell , that guy should make over 7 grand on that bike that way. Why that could be money in the bank,in the bank. Yes twice.This guy is a genius, I'll bet he'll have his own spaceship pretty soon,  if he doesn't already have one. I heard Branson started off doing stuff like that with planes to make his first billion.... perhaps I should try this investment model soon before everyone else jumps on board and floods the market.
  Just think about all that time  we wasted putting bikes back together when we could have just sold all the parts first and ride around on what was left for a year and a half .....and expect to get a high dollar sale in 19 months. What were we all thinking?

[Terry in Australia]

Oh well, some yupster with skinny jeans, a beard and a man bun will love it.........

[gpzkat]

On the upside, I picked up a bunch of '73 750 parts from people making customs, got a nice front fender, complete electrics, barely used perfect chrome OG shocks (I know they aren't great but actually these work pretty well!), grab rail. All in really nice condition for $100. Fads come and go, it's always going to be that way.  Always look at the bright side of life!

  $4450..... So all this time I've been tracking down parts so my bikes will be complete if I ever sell one. So  350 is a new sales model maybe we should all be getting in on..... selling most of the parts off the bike to guys like us before you sell  the roller with an uncomfortable seat, and a 75k engine, for big dollars?  Hell , that guy should make over 7 grand on that bike that way. Why that could be money in the bank,in the bank. Yes twice.This guy is a genius, I'll bet he'll have his own spaceship pretty soon,  if he doesn't already have one. I heard Branson started off doing stuff like that with planes to make his first billion.... perhaps I should try this investment model soon before everyone else jumps on board and floods the market.
  Just think about all that time  we wasted putting bikes back together when we could have just sold all the parts first and ride around on what was left for a year and a half .....and expect to get a high dollar sale in 19 months. What were we all thinking?

[RAFster122s]

He has extra room between the seat and tank for his nuts to slide into when rear-ending the vehicle ahead of you so the tank can castrate you as you go flying over the bars...
Love that feature he built in!

I enjoy how his header pipes are clean and shiny but he's baked a nice patina on the cans giving them a light coating of oil so they will give a lovely bronze...
That takes custom talent!

"The guys over at Mach 1 in Costa Mesa have dialed this think in. It runs beautifully and pushes some pretty great power for a 350cc bike."
The guys getting it to think is incredible too...
He takes it on short rides as that's all it can do before he has to push it home.

[gmoss]

Oh well, some yupster with skinny jeans, a beard and a man bun will love it.........

hey man, that's me you're describing, don't associate me with that fugly motorcycle-shaped-object.

[754]

 This is a high price, and no high dollar parts 77 engine in a 74 frame.. 16 K Canadian ..i kid you not..
 They claim 74 frame , but its not factory or even factory with hardtail..

[BPellerine]

looks like a 90s sporty engine

[754]

Yeah should be 80,s

[70CB750]

Truth is if it was closer, I would probably pick it up.

Its in New Philadelphia, OH

[grcamna2]

Prokop,you going to get that? I guess it'll need some type of jackshaft to connect the automotive rear yoke to the CB900 driveshaft.

[Alan F.]

I believe that's the shaft drive 10 speed hi-lo engine.

Wow, those engine cases do go on for a while don't they?

[Remcod]

For sale locally ($700.00). Do you think there is any chance the owner did that custom paint job himself ??  You have to wonder if it was stolen or Meth is truly a terrible substance   

This is why you have to lock the paint cabinet when you have young childeren

Verstuurd vanaf mijn SM-A415F met Tapatalk

[70CB750]

Prokop,you going to get that? I guess it'll need some type of jackshaft to connect the automotive rear yoke to the CB900 driveshaft.

Yes, that would be an interesting problem. I wonder if the rear axle is off center, because the power output sure is.  Maybe thats where he stopped.

[70CB750]

I believe that's the shaft drive 10 speed hi-lo engine.

Wow, those engine cases do go on for a while don't they?

Correct, it is from CB900 Custom.  The connecting transfer case makes it long.

[RAFster122s]

Saw a guy build a three wheeler and he matched the pumpkin location to the shaft drive cutting the axle tubes to length. He was putting it on a shaft drive Suzuki. Thread was on cx500 forums several years ago.

[grcamna2]

Prokop,you going to get that? I guess it'll need some type of jackshaft to connect the automotive rear yoke to the CB900 driveshaft.

Yes, that would be an interesting problem. I wonder if the rear axle is off center, because the power output sure is.  Maybe thats where he stopped.

I was looking at the left side of the engine/trans. and it looks like the output shaft butts right into the frame !
I would imagine the frame would need to be modified.

[70CB750]

Prokop,you going to get that? I guess it'll need some type of jackshaft to connect the automotive rear yoke to the CB900 driveshaft.

Yes, that would be an interesting problem. I wonder if the rear axle is off center, because the power output sure is.  Maybe thats where he stopped.

I was looking at the left side of the engine/trans. and it looks like the output shaft butts right into the frame !
I would imagine the frame would need to be modified.

I actually know this.  The engine has output on the left. after that there is connecting transmission (High and Low, its the oblong chrome shape you see on the left) and the output is on the right through the swing arm. 

Honda was combining european engine with chain output on the left and rear wheel from Gold Wing with shaft input on the right.