Author Topic: The Abomination thread!  (Read 373657 times)

0 Members and 1 Guest are viewing this topic.

Offline jgger

  • Master
  • *****
  • Posts: 2,375
Re: The Abomination thread!
« Reply #2775 on: January 05, 2023, 10:09:34 PM »
The gas tank is a dual purpose part. If you stop too long, you can still get your mail.
"The SOHC4 uses a computer located about 2-3 ft above the seat.  Those sometimes need additional programming." -stolen from  Two Tired

The difference between an ass kisser and brown noser is merely depth perception.  Stolen from RAFster122s

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,555
  • SOHC4 member # 2605
Re: The Abomination thread!
« Reply #2776 on: January 05, 2023, 10:51:25 PM »
Is that a goldwing tank? Look at the sides and the right side at the top of the tank.
Did this retch put a Goldwing fake tank storage compartment to cover the actual tank?
David- back in the desert SW!

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,282
  • I love to restore & travel. Keep'em Going Strong !
Re: The Abomination thread!
« Reply #2777 on: January 05, 2023, 11:24:09 PM »
That red-ish GW 3-wheel pick-up looking abomination has a set of running boards along both sides large enough to carry 3 extra people on each side  ::) Put those on a standard GW 1100..
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.


Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,810
  • bike in a box
Re: The Abomination thread!
« Reply #2779 on: January 09, 2023, 06:42:42 AM »
what a beauty !
  All it needs is it all "hooked up to the handle bars."
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Offline spotty

  • Master
  • *****
  • Posts: 1,960
  • cb750....for when a Vmax is just too much bike
    • spottys world of vmaxes and great danes
i blame Terry

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,400
  • So, what do ya wanna talk about today?
Re: The Abomination thread!
« Reply #2781 on: January 12, 2023, 04:43:25 PM »
https://www.ebay.com.au/itm/325494693334?hash=item4bc8feddd6:g:1NkAAOSwi9ljtQ4M&amdata=enc%3AAQAHAAAAkE7UEGu34My%2FGBDMKYMCjFgbHYuVcItIcwN9KZbG3XeeI0t1vcUqDuigDYiXZ29xZxGmPypBj6imWL2T4nC57bjPX07aHmRw0tyLted%2FjqF6DTlOWK1Ly7qr%2FlzxzR5IAzWrUvYwPVzzLE7s2eppKh%2BWNagYRf9pzHfPsim5WK0vxS2cwXK8%2Fo46v%2Brclihojg%3D%3D%7Ctkp%3ABk9SR6LWn4i1YQ

here you go, not necessarily an abomination, but well on the way. Check out the rear shock mounts for your starter

“I’ll never finish it”. He should have never started it….. Nice tank though, I think he gave up when he realised that he can only turn his handlebars about 10 degrees in either direction without hitting the tank. At least the frame isn’t chopped up, so someone could take that crap off and restore it, if he hasn’t sold off the original forks and wheels, etc. ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Online CycleRanger

  • No comment about being an
  • Really Old Timer ...
  • *******
  • Posts: 5,482
  • Central Texas Shop Manual Advocate
Re: The Abomination thread!
« Reply #2782 on: January 18, 2023, 07:32:40 PM »
............... :P :P
Do you have a copy of the Honda Shop Manual or Parts List for your bike? Get one here:
https://www.honda4fun.com/materiale/documentazione-tecnica
CB750K5        '79 XL250s     CL350K3
CB750K3        '76 XS650      '76 CJ360T

Offline jgger

  • Master
  • *****
  • Posts: 2,375
Re: The Abomination thread!
« Reply #2783 on: January 18, 2023, 08:25:12 PM »
Sweet ride🤢
"The SOHC4 uses a computer located about 2-3 ft above the seat.  Those sometimes need additional programming." -stolen from  Two Tired

The difference between an ass kisser and brown noser is merely depth perception.  Stolen from RAFster122s

Offline Kelly E

  • Geriatric Hooligan
  • Master
  • *****
  • Posts: 2,442
Re: The Abomination thread!
« Reply #2784 on: January 18, 2023, 09:20:03 PM »
That's got to be one of the worst ones yet. :o
Never Give Up - Never Surrender

The Rust Bros. Garage Collection
1974 Honda CB 550 K0                                            1971 MGB/GT
1975 Honda CB 400F Super Sport                          1972 MGB/GT
1977 Kawasaki KZ 1000 LTD                                   1985 GMC S15
1978 Kawasaki KL 250
1980 Suzuki GS 1100E
1982 Honda CB 900F Super Sport
1983 Honda CB 1100F
1984 Honda VF 700S Sabre
1984 Honda VF 1000F Interceptor
1990 Moto Guzzi 1000 Le Mans
1994 Kawasaki Concours ZG 1000A9
2005 Harley Davidson Fat Boy

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,555
  • SOHC4 member # 2605
Re: The Abomination thread!
« Reply #2785 on: January 19, 2023, 01:10:30 AM »
Is that mess behind the front forks a set of raised floorboards and relocated shifter? Some truely ugly hacks have been done to that poor sport bike...
David- back in the desert SW!

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,508
  • To many bikes-but lookin' for more
Re: The Abomination thread!
« Reply #2786 on: January 19, 2023, 05:39:01 AM »
Dibs on that awesome headlight !

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,413
  • Old guy
Re: The Abomination thread!
« Reply #2787 on: January 19, 2023, 01:39:30 PM »
Whyyyyyyyyyyyyy?
1973 CB 750 K3
10/72 build Z1 Kawasaki

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,282
  • I love to restore & travel. Keep'em Going Strong !
Re: The Abomination thread!
« Reply #2788 on: January 19, 2023, 02:23:03 PM »
I can just imagine the builder of that mess..  ::)

I think that pile of VFR800 parts collection should be sold for less than $500('liberate' that poor VFR,get it away from there),then take off all the odd parts and put the VFR back to stock  ;) There's still a good bike underneath all that stuff.
« Last Edit: January 19, 2023, 05:40:58 PM by grcamna2 »
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,400
  • So, what do ya wanna talk about today?
Re: The Abomination thread!
« Reply #2789 on: January 19, 2023, 05:28:42 PM »
I reckon the owner of the classic BMW would probably want his headlight back…. ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,508
  • To many bikes-but lookin' for more
Re: The Abomination thread!
« Reply #2790 on: January 20, 2023, 06:42:16 AM »
Whyyyyyyyyyyyyy?
Tongue in cheek comment. That headlight can make any ugly 'custom' bike even worse when done like that.

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,413
  • Old guy
Re: The Abomination thread!
« Reply #2791 on: January 20, 2023, 06:58:51 AM »
Some folks have no concept of what things are worth.
1973 CB 750 K3
10/72 build Z1 Kawasaki

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,555
  • SOHC4 member # 2605
David- back in the desert SW!

Offline jgger

  • Master
  • *****
  • Posts: 2,375
Re: The Abomination thread!
« Reply #2793 on: January 20, 2023, 11:24:36 AM »
Probably kinda like what the guy that built that VFR had in mind...............oops, swing and a miss!  Very creative, I wouldn't mind a test ride on it!
« Last Edit: January 20, 2023, 11:26:26 AM by jgger »
"The SOHC4 uses a computer located about 2-3 ft above the seat.  Those sometimes need additional programming." -stolen from  Two Tired

The difference between an ass kisser and brown noser is merely depth perception.  Stolen from RAFster122s

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,282
  • I love to restore & travel. Keep'em Going Strong !
Re: The Abomination thread!
« Reply #2794 on: January 20, 2023, 11:43:03 AM »
Probably kinda like what the guy that built that VFR had in mind...............oops, swing and a miss!  Very creative, I wouldn't mind a test ride on it!

GT750 'water buffalo' to the MAX  8)
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,400
  • So, what do ya wanna talk about today?
Re: The Abomination thread!
« Reply #2795 on: January 20, 2023, 11:51:03 PM »
Probably kinda like what the guy that built that VFR had in mind...............oops, swing and a miss!  Very creative, I wouldn't mind a test ride on it!

I like that bike, it could only ever be a drag bike with those headers requiring the forks to be raked out so much, but it's very well done. ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,508
  • To many bikes-but lookin' for more
Re: The Abomination thread!
« Reply #2796 on: January 21, 2023, 05:36:44 AM »
900cc and 180hp make for a pretty potent 2 stroke engine. There were some drag racers who owned a greenhouse down the road from my shop and I think one of their kids drove a small rail type of dragster based off a snowmobile engine in some type of class. Maybe Don is familiar with all that.
  I think its a pretty cool well done contraption. Long live the 2 stroke !!
« Last Edit: January 21, 2023, 05:39:43 AM by ekpent »

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,555
  • SOHC4 member # 2605
Re: The Abomination thread!
« Reply #2797 on: January 21, 2023, 07:14:43 AM »
The article gives more photos and details on the conversion...it is well done, unlike many that get posted here.
The weight of it is gonna be a strange distribution but the exhaust pipes likely don't weigh a ton, just super bulky expansion chambers...
David- back in the desert SW!

Offline Godffery

  • Godffery's Garage
  • Expert
  • ****
  • Posts: 1,171
  • Wisdom brings a realization of how little we know.
    • Godffery's Garage hosted by VinMoto.org
Re: The Abomination thread!
« Reply #2798 on: January 29, 2023, 08:45:50 AM »
 https://www.facebook.com/photo/?fbid=1475339929660566&set=gm.570214761665521&idorvanity=154612736559061&__cft__[0]=AZV2togiL5UexpKcxWLe4XDvm0Rxd7SIIg3uVc4jG-ADGVIKa8ekPNRZG853Igo-VChfQTSkNCRbiSqGd5kEdZMook4SHCgpYGbiPUNUGxUT9ewL5EX623zB_izfN4IAF5hSJtbFwr7f5BJ4TiXQtqefFnhxFTbaopR0606H6WzyV14W0oxZuK1MSCYLM3Vxf4w&__tn__=EH-R

 Complete with a link to the whole Abomination process...
 https://www.youtube.com/@grindngears2684
« Last Edit: January 29, 2023, 08:58:49 AM by Godffery »

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,282
  • I love to restore & travel. Keep'em Going Strong !
Re: The Abomination thread!
« Reply #2799 on: January 29, 2023, 01:56:52 PM »
https://www.facebook.com/photo/?fbid=1475339929660566&set=gm.570214761665521&idorvanity=154612736559061&__cft__[0]=AZV2togiL5UexpKcxWLe4XDvm0Rxd7SIIg3uVc4jG-ADGVIKa8ekPNRZG853Igo-VChfQTSkNCRbiSqGd5kEdZMook4SHCgpYGbiPUNUGxUT9ewL5EX623zB_izfN4IAF5hSJtbFwr7f5BJ4TiXQtqefFnhxFTbaopR0606H6WzyV14W0oxZuK1MSCYLM3Vxf4w&__tn__=EH-R

 Complete with a link to the whole Abomination process...
 https://www.youtube.com/@grindngears2684

He named it 'the street sweeper'  :D
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.