« previous next »
Pages: [1]   Go Down

Author Topic: Swingarm Torque?  (Read 1255 times)

0 Members and 1 Guest are viewing this topic.

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,605
Swingarm Torque?
« on: July 26, 2011, 07:22:21 AM »
I just had Hondaman rebuild the swingarm on my K1. My service manual does not give a torque setting for the main bolt. Is this just "snug it up" or do I really need to crank it down?
Logged
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Offline david 750f

  • Expert
  • ****
  • Posts: 827
  • 1976 CB750F
Re: Swingarm Torque?
« Reply #1 on: July 26, 2011, 07:40:53 AM »
Not sure about the K1. On my 76 750F the shop manual gives 32.5-50 ft pounds. Honda calls it the "rear fork pivot nut".
Logged
1976 CB 750F

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,605
Re: Swingarm Torque?
« Reply #2 on: July 26, 2011, 08:32:38 AM »
Ah...I will check again to see if it is listed under pivot nut. Thanks...
Logged
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA
Pages: [1]   Go Up
« previous next »