Topic: AN-10 hose for CR oil lines?

[ttr400]

Need to make up the oil lines for my Cr750 build. This is what I know so far.

I would like to Use the pro light black cotton braided hose, sizes listed and converted to metric are 20.06 OD and 14.22 ID for AN10. The std 750 hose measures 22.0 OD and 13.0 ID.
Question: Is AN10 the correct size to use? What do you guys use or could recommend? or point me in the right direction.

Kevin

[Tintop]

I used Aeroquip StartLite AN8 hose on my 550 remote filter setup.  However it is only 11.17 (.44"), so I would think the AN10 would be the better choice for the CR750 dry sump setup.

[voxonda]

I used the -10 when using the oem oiltank setup. Actually still do use -10 on my present setup.

Cheers, Rob

[lordmoonpie]

Hey Kevin,

I used Earls braided -10 hose on my CR, which has a Mead Speed (Bartel) tank and it's very much nice and oil tight so I think you will be fine with AN10 black cotton braided hose.

[Sam Green Racing]

It's looking real good Kevin.

http://www.ttr400.com/photo_2.html

Sam.

[ttr400]

Thanks Guys, looks like AN10 it is then,

Glad you like it so far Sam. I'm getting there.

Kevin

[Sam Green Racing]

Thanks Guys, looks like AN10 it is then,

Glad you like it so far Sam. I'm getting there.

Kevin

Credit where credits due Kevin.