« previous next »
Pages: [1]   Go Down

Author Topic: cl175 camshaft bearing bolts stripped (help)  (Read 821 times)

0 Members and 1 Guest are viewing this topic.

Offline emook

  • Full Member
  • *
  • Posts: 35
cl175 camshaft bearing bolts stripped (help)
« on: August 03, 2011, 05:21:01 PM »
Anyone know of the best way for me to get all the phillips head screws out on both sides of the camshaft? my drill isn't doing it and im afraid to keep stripping the heads even worse. they're not easy to get to since they're down inside the little outside case.
Logged

Offline chickenman_26

  • Hot Shot
  • ***
  • Posts: 598
    • Motorcycle Consumer News
Re: cl175 camshaft bearing bolts stripped (help)
« Reply #1 on: August 05, 2011, 07:36:03 AM »
Drill? Those are #3 Phillips head screws. Use the correct screwdriver, or an impact driver if necessary, and there won't be any need for a drill. If you're using a #2 Phillips screwdriver, you'll just bugger things up.

Stu
Logged
MCN DTF
Pages: [1]   Go Up
« previous next »