Author Topic: Calendar Girl Gets New Engine,Yosh,RC,etc. (Read 175040 times)

Bill/BentON Racing · « **on:** August 04, 2011, 02:43:45 PM »

Time to get Calendar Girl back on the road.This one coming out.836cc going in!

Deep in the batcave he ventured.......and found this!

Yep,sorry,you're coming out and this one going in!

The part that's hardest to find...the dist. drive.

What's that? Yosh B grind cam.Pop's best!

Yosh cam chain and RC sprocket,could advance or retard cam,but should have been slotted,it or another WILL BE!

Pretty clean inside?

What's that? Yosh alum rods...cool!

In order: 736cc Honda,812cc Yosh,836cc Wiseco,970cc RC,1000cc APE,836cc RC
what's in it now!

Hope to be riding Sunday! Bill

Jerry Rxman Griffin aka MuthaF'er · « **Reply #1 on:** August 04, 2011, 03:14:35 PM »

Bill,

Is the B known as the Daytona?

bwaller · « **Reply #2 on:** August 04, 2011, 03:30:38 PM »

I wonder Bill, do you ride out through hanging vines etc. when you leave that place?

Sounds like it should be fun away from the auto.

Bill/BentON Racing · « **Reply #3 on:** August 04, 2011, 03:58:08 PM »

Quote from: Jerry Rxman Griffin on August 04, 2011, 03:14:35 PM

Bill,

Is the B known as the Daytona?

Jerry,I believe that to be correct! Bill

mick7504 · « **Reply #4 on:** August 04, 2011, 04:24:23 PM »

Bill

I see that the links on the primary chain are staggered/offset.

Is there a reason that you know of for setting them this way?

It's something that I've queried before just out of curiosity and there have been mixed views about this.

Mick

MRieck · « **Reply #5 on:** August 04, 2011, 06:01:40 PM »

Bill....who is this "Sam Green"

? My younger son thinks he has heard of him. A white British rapper or something.

Bill/BentON Racing · « **Reply #6 on:** August 04, 2011, 06:48:57 PM »

Him and Al,separated @ birth! Rap,sing,race,he can do it all!! ::)Finland:Lock up your ladies....dogs,cats...Run!

Brent,just a secret door!More to follow.
Mick,built the bike way back in late 70's @ our independent shop in MBSC.,Cycle Engineering.
Another racer and local Honda shop employee Chad Hopkins if memory is correct bought it from the original owner.He or someone else did the motor.Will try and contact him.
The swingarm is on Samauto!Still have DID WM6 rear wheel off of it.Oil cooler,struts etc.
More pics later.Bill

Bill/BentON Racing · « **Reply #7 on:** August 04, 2011, 09:04:14 PM »

More pics:

Cool,no elec start,lightened rotor.

Spin up a little quicker!

Bill

lordmoonpie · « **Reply #8 on:** August 05, 2011, 12:09:41 AM »

Quote from: MRieck on August 04, 2011, 06:01:40 PM

Bill....who is this "Sam Green"? My younger son thinks he has heard of him. A white British rapper or something.

Close Mike - not a 'white' British Rapper, more like a shi.....

malcolmgb · « **Reply #9 on:** August 05, 2011, 06:25:52 AM »

Quote from: MRieck on August 04, 2011, 06:01:40 PM

Bill....who is this "Sam Green"? My younger son thinks he has heard of him. A white British rapper or something.

I think the 'c' has stopped working on your keyboard

voxonda · « **Reply #10 on:** August 05, 2011, 06:48:54 AM »

Just love those Yoshi rods.

Lookin'good!

Cheers, Rob

joesmotos · « **Reply #11 on:** August 05, 2011, 04:31:04 PM »

I have a couple extra cans of satin black PJ1 paint for that thing if you want em...dont tell me youre going to put that engine in that clean bike lookin like that..after all those hours you spent on it...oh yeah i remember man
lol

Joe

Jim F · « **Reply #12 on:** August 05, 2011, 06:37:07 PM »

If you know Bill it will at-least look as good as the engine thats coming out
or better

Bill/BentON Racing · « **Reply #13 on:** August 06, 2011, 12:18:22 PM »

Joe,Jim,thanks on the paint(may ask just so your azz stops by! ;)Jim,It will look better than one in it....have old box of new Brown's chrome plated engine covers in the batcave somewhere!Joker tappet caps(wrinkle blk maybe)allen bolts etc.
Going to take a little longer(been cooking hot dogs @ local thrift store).Back to work time.Joe,Bill the "Basher" Benton might not have won the race,but always won practice! ::)Bike usually ran good....but it always looked good!

LOL,Bill

dragracer · « **Reply #14 on:** August 23, 2011, 07:42:31 AM »

Quote from: bellcow54 on August 06, 2011, 12:18:22 PM

Joe,Jim,thanks on the paint(may ask just so your azz stops by! ;)Jim,It will look better than one in it....have old box of new Brown's chrome plated engine covers in the batcave somewhere!Joker tappet caps(wrinkle blk maybe)allen bolts etc.
Going to take a little longer(been cooking hot dogs @ local thrift store).Back to work time.Joe,Bill the "Basher" Benton might not have won the race,but always won practice! ::)Bike usually ran good....but it always looked good! LOL,Bill

Bill,
Looking good so far my friend. If you keep doing these dragbike projects i might get more incentive to work on my K model for a street ET bike. Will have to go with a mono shock set up so i can put a sticky, wide 17" tire on the back and a decent shock for chassis tuning.

Do you plan to use electronic ignition on the bike???

Bill/BentON Racing · « **Reply #15 on:** August 23, 2011, 05:48:48 PM »

Oh yes.....MSD I think!

See ya'll Fri nite.Got to find something w/kickstarter..sounds like too much fun!

Bill/BentON Racing · « **Reply #16 on:** August 28, 2011, 07:19:32 AM »

Well,Friday was big fun,Way to go Curtis,won his class.Jim,Frank and Gladys,Thanks,Bill
Samauto won first round,lost in second.Bike ran it's best so far.Cam is out and on lift,came out when I posted last night.Cam and box sitting on towers. Installed!Going too work on Calendar Girl today.Time to work on something else. Dazed and confused(normal state)in GA.
I need to take the RC51 out to clear me head.LOL Bill
Sam,Unlock the thread,can't go back,live and learn...............we don't want to throw Samauto in the harbor!!!!!

Jim F · « **Reply #17 on:** August 28, 2011, 07:50:47 AM »

LOL a new Boston Tea Party

Jim

dragracer · « **Reply #18 on:** August 28, 2011, 12:16:53 PM »

When does the book burning begin?

?Lol.

Sam Green Racing · « **Reply #19 on:** August 28, 2011, 01:13:38 PM »

Done and it's to windy for a tea party.

Sam.

Bill/BentON Racing · « **Reply #20 on:** September 21, 2011, 08:20:20 PM »

Test Post,new computer,thanks,Jon Weeks!

Engine about done.

Jim F · « **Reply #21 on:** September 25, 2011, 11:29:57 AM »

Looks good Bill
you love the wrinkle paint but I really like the color of the cylinders
Is the paint from Kal-gaurd?
I will call you later and see if I can get those foot peg adapters over to you
Jim