Author Topic: Calendar Girl Gets New Engine,Yosh,RC,etc. (Read 171799 times)

MRieck · « **Reply #25 on:** September 25, 2011, 06:26:47 pm »

You're a wrinkle mad man Bill.

That wrinkle hides a lot of "age".

Bill/BentON Racing · « **Reply #26 on:** September 26, 2011, 05:24:13 am »

Mike,oh yes it does! The"paint" for an Automatic!!

.Got the tach in.Autometer #3965. Install tonight or tomorrow.Friday we go back to Commerce.Calendar Girl goes week after.

Bill

Sam Green Racing · « **Reply #27 on:** September 26, 2011, 06:09:31 am »

Quote from: MRieck on September 25, 2011, 06:26:47 pm

You're a wrinkle mad man Bill. That wrinkle hides a lot of "age".

Now don't be calling us old folks Murphy

, you'll have a few wrinkles of your own one day.

Sam.

dragracer · « **Reply #28 on:** September 26, 2011, 08:24:27 am »

Will it be ready for Valdosta?

? You can't let Sam have all the fun on the "matic".

Bill/BentON Racing · « **Reply #29 on:** September 28, 2011, 02:16:58 pm »

Oh yes,Sam can't have all the FUN! Hope to take it to Commerce next week.Don't know,flying solo,my man Friday(French) has to keep up work and other obligations or no Valdosta!

So I better get to work!!

Bill

Sam Green Racing · « **Reply #30 on:** September 28, 2011, 02:43:03 pm »

Hope you get them both sorted Billy, will be nice to see CG in race mode

Sam.

Bill/BentON Racing · « **Reply #31 on:** September 28, 2011, 03:03:00 pm »

Sam,yes it will. ;Did I mention VHT makes WRINKLE RED!!!!

Bill

Sam Green Racing · « **Reply #32 on:** September 28, 2011, 03:20:31 pm »

Oh Sh1t.

Sam.

Bill/BentON Racing · « **Reply #33 on:** September 28, 2011, 03:26:28 pm »

dragracer · « **Reply #34 on:** October 13, 2011, 07:10:23 pm »

Any updates??? Will we she be ready?

??

Bill/BentON Racing · « **Reply #35 on:** October 15, 2011, 11:30:46 am »

;

We are up and running,internet that is.Engine is in frame,just put in motor mounts,might just fire this puppy up SOON!Commerce report in a little while on Samauto post.Yehah, back on the net......!Stories to tell...what's that black thing just came off rt rear trailer wheel? Oh the TIRE! Gu

dragracer · « **Reply #36 on:** October 15, 2011, 07:48:29 pm »

Quote from: bellcow54 on October 15, 2011, 11:30:46 am

;
We are up and running,internet that is.Engine is in frame,just put in motor mounts,might just fire this puppy up SOON!Commerce report in a little while on Samauto post.Yehah, back on the net......!Stories to tell...what's that black thing just came off rt rear trailer wheel? Oh the TIRE! Gu

Welcome to my world-lol. I hope you still got the fender. Half of mine is missing

dragracer · « **Reply #37 on:** October 22, 2011, 10:27:25 pm »

Update on Calender Girl please.

Bill/BentON Racing · « **Reply #38 on:** October 26, 2011, 07:23:08 am »

Frank,OK,engines in.carbs on,Dyna coils and Dyna S in,NGK Racing wires and caps,CirCycle Struts on(outta the bat cave

)Lowered it 2 inches in rear.Clip ons on order(Cycle X,Thanks Ken)along with other goodies.Spin on oil cooler adapter,have an Earl's cooler already.With Yosh rods,cam,cam chain,had to put on Yosh replica Carpy pipe,looks awesome and real light.Took off several pounds,centerstand and hardware,shocks,rear pegs and brackets,gotta change seat and gauges.Pics later

,Bill
Gotta make braided lines for oil tank main thing left to do.Hope I can kick it over,may be 12.5-1!!

bwaller · « **Reply #39 on:** October 26, 2011, 07:37:03 am »

Check through the cave for a roller starter Bill.

dragracer · « **Reply #40 on:** October 26, 2011, 01:41:51 pm »

Quote from: bellcow54 on October 26, 2011, 07:23:08 am

Frank,OK,engines in.carbs on,Dyna coils and Dyna S in,NGK Racing wires and caps,CirCycle Struts on(outta the bat cave )Lowered it 2 inches in rear.Clip ons on order(Cycle X,Thanks Ken)along with other goodies.Spin on oil cooler adapter,have an Earl's cooler already.With Yosh rods,cam,cam chain,had to put on Yosh replica Carpy pipe,looks awesome and real light.Took off several pounds,centerstand and hardware,shocks,rear pegs and brackets,gotta change seat and gauges.Pics later ,Bill
Gotta make braided lines for oil tank main thing left to do.Hope I can kick it over,may be 12.5-1!!

Sounds like some great progress. Only a few weeks left before Valdosta. Will you "git er done" in time??? I'm trying to meet that deadline myself on another project but its not looking good for me.

Just a suggestion but you likely will need to put real shocks on the rear to get some squat versus a quick snatch from the rigid suspension. Its not an automatic so the higher launch rpms will tend to make it want to yank the front wheel off the ground. Let the rear suspension work for you to lower the 60'. Those struts are not your friend on a no bar, hand clutch bike used for drag racing. If you need to lower the bike, there are shorter shocks available through Cycle X or you can just make new mounts on the arm and change the shock angle a bit on the stock shocks. You really want to keep that suspended arm or you'll be fighting wheelies unnecessarily. Without a suspended swingarm, you won't be able to lower the 60'.

Bill/BentON Racing · « **Reply #41 on:** October 26, 2011, 09:16:24 pm »

K. Thanks,back to shocks,Bill

dragracer · « **Reply #42 on:** October 27, 2011, 10:54:53 am »

Quote from: bellcow54 on October 26, 2011, 09:16:24 pm

K. Thanks,back to shocks,Bill

Just passing on a bit of personal experience and observations of other bikes from my years of racing.

Bill/BentON Racing · « **Reply #43 on:** October 27, 2011, 03:46:07 pm »

Frank,appreciate the input.Going to oreder some shorty shocks from Ken @ CycleX.As for being ready reminds me of the road racing days(working on engine in back of van while bro drove).It'll be close.

Bill

dragracer · « **Reply #44 on:** October 27, 2011, 09:19:14 pm »

Quote from: bellcow54 on October 27, 2011, 03:46:07 pm

Frank,appreciate the input.Going to oreder some shorty shocks from Ken @ CycleX.As for being ready reminds me of the road racing days(working on engine in back of van while bro drove).It'll be close. Bill

Ok, lets have a contest to see who will actually get their projects ready for Valdosta. My current status is:

* Still fabricating and welding brackets on frame for pegs/battery box/ electronics etcc
*Paint frame and swingarm
*Install new fork seals and tapered bearings
* Fabricate all new brake lines
* Still need to purchase offset sprocket, lithium bat, switched throttle, dyna plate for Pro Series 2
* Building brand new motor- still in pieces
* Need to wire complete bike with full race harness
* Need to set up complete nitrous system
* Start bike
* Need to test
* Only have 2 hands, a half a brain and less than 2 weeks left.

Umm, on second thought, i think this is a loosing proposition for me-lol.

Bill/BentON Racing · « **Reply #45 on:** October 28, 2011, 03:48:58 pm »

Frank,tach came in today,Autometer #6836.have to wire and mount,clip ons on the way,oil cooler spin on kit,shorty shox,got to make oil lines for tank and cooler,install the ordered parts........I think I got the holeshot! ;)Want oil temp gauge and digital voltmeter like Samauto.Have to make chainguard.Like a Hayabusa m/cylinder also. Have a seat for now,I think thats most of it.LOL Bill
Pics:

Sam,it;s your fault! ;)Biiiiiiiiiig Bore kits available..contact Mike Rieck!!

Frank,i'm winning,but engine good?

A seat!Old cut down Drag Specialties.

Struts gotta go,Shorty shox on the way.

Love that pipe!

Commerce rained out or at least it's raining here.Better work on Calendar Girl!!

Bill

Sam Green Racing · « **Reply #46 on:** October 28, 2011, 04:31:37 pm »

Time for me to go to bed but that #$%* is looking real good.

Sam

Jim F · « **Reply #47 on:** October 30, 2011, 07:33:18 am »

If it runs half as good as it looks then there is going to be some new trophy,s on the shelf after valdosta.
well done Bill
sorry about the smooth bores...........

Jim

Bill/BentON Racing · « **Reply #48 on:** October 30, 2011, 12:44:04 pm »

Thanks Sam and Jim,heres some pics of tach/speedo:

Gotta get busy!

Valdosta here we come!

Bill

dragracer · « **Reply #49 on:** October 31, 2011, 06:57:47 am »

Good work there my friend.

You are way out front with a hole shot and approaching the mph cone. I'm still back at the 60' mark. Now where is that darned nitrous button when you need it??

News:

Author Topic: Calendar Girl Gets New Engine,Yosh,RC,etc. (Read 171799 times)