Author Topic: cb750k fork question  (Read 1734 times)

0 Members and 1 Guest are viewing this topic.

Offline galaxian

  • Full Member
  • *
  • Posts: 37
cb750k fork question
« on: May 09, 2005, 12:18:42 PM »
Hi all,this is my first post here and I would just like to say hello and ask a question.

I have a 72 cb750k and it looks like the owner before put longer forks. I am not sure but can anyone give me a measurement from the middle of the wheel axle to the top of the fork?
1973 cb750k

Offline Bob Wessner

  • "Carbs Suck!"
  • Really Old Timer ...
  • *******
  • Posts: 10,079
Re: cb750k fork question
« Reply #1 on: May 09, 2005, 01:58:43 PM »
From the axle center line to the top of the fork cap bolt is 30.5 in. I took this measuremant on an 750, but the parts list says it is the same fork assembly for the 750, K1 and K2.
We'll all be someone else's PO some day.

Offline galaxian

  • Full Member
  • *
  • Posts: 37
Re: cb750k fork question
« Reply #2 on: May 09, 2005, 02:15:26 PM »
Bob,
Thanks for the measurement. Now I can finally see if mine are stock (i hope i hope) or have been lengthened.
1973 cb750k

Offline Bob Wessner

  • "Carbs Suck!"
  • Really Old Timer ...
  • *******
  • Posts: 10,079
Re: cb750k fork question
« Reply #3 on: May 09, 2005, 02:49:39 PM »
I should have added, this was with the bike on the center stand and the front wheel on the ground as apposed to being raised.
We'll all be someone else's PO some day.