« previous next »
Pages: [1]   Go Down

Author Topic: Steering  (Read 735 times)

0 Members and 1 Guest are viewing this topic.

Offline patlac

  • Full Member
  • *
  • Posts: 15
Steering
« on: August 24, 2011, 11:50:11 AM »
 Hi to all I have a problem with my 1977 400/4. When I am pushing it and turn Bars to the left the Brakes bind going Fotward or Reverse Turning Bar to right no problem, I removed Caliper and checked pistons and cleaned them.No good anyone have this problem. Itis suggested that I change Brake Hoses but the previous owner had fitted new ones. Any other suggestions
Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,370
  • Today's Lesson: One good turn deserves another.
Re: Steering
« Reply #1 on: August 24, 2011, 12:32:18 PM »
wheel bearings?  The thought being the hub carrying the rotor, is shifting, putting the rotor in a bind in the caliper.

I've heard of this, but never actually seen it. Wheel bearings do not need a lot of miles to be bad. Really old can cause problems too.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: Steering
« Reply #2 on: August 24, 2011, 12:34:31 PM »
Check the routing of the brake hoses.  You said the PO installed new lines.  They may be routed in such a way that one is getting pinched when turning the bars. 
Logged

Offline patlac

  • Full Member
  • *
  • Posts: 15
Re: Steering
« Reply #3 on: August 25, 2011, 11:28:12 AM »
Thanks for replies Guys I believe that they are new wheel bearings but I will check also Line routing Will keep you posted.
Logged
Pages: [1]   Go Up
« previous next »