« previous next »
Pages: [1]   Go Down

Author Topic: inlet rubbers for 29mm smoothbores  (Read 1420 times)

0 Members and 2 Guests are viewing this topic.

Offline topgun

  • Full Member
  • *
  • Posts: 43
inlet rubbers for 29mm smoothbores
« on: September 18, 2011, 12:11:03 pm »
where can i get inlet rubbbers for 29mm smoothbores i have been told 2number3 rubbers and 2 number2 rubbers will work can anyone confirm or deny my oldones are beyond saving cheers tony
Logged

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: inlet rubbers for 29mm smoothbores
« Reply #1 on: September 18, 2011, 12:39:58 pm »
Assuming your talking about a CB750 K, the rubbers for #1 and #4 are the same and the rubbers for #2 and #3 are the same.
can be had here  ;)
http://www.dynoman.net/bikepages/sohc/oe.html#in-mani
 
« Last Edit: September 18, 2011, 12:43:47 pm by brandEn »
Logged

Offline topgun

  • Full Member
  • *
  • Posts: 43
Re: inlet rubbers for 29mm smoothbores
« Reply #2 on: September 21, 2011, 11:56:59 am »
thanks for the link hopefully the 2,s and 3,s do the trick cheers
Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: inlet rubbers for 29mm smoothbores
« Reply #3 on: September 21, 2011, 12:22:54 pm »
The manifolds for the VM29s are different than the OEMs. Maybe I'm stating the obvious for you.

The link provided by BrandEn is for OEM parts.

The better link would be here and scroll down past the OEM stuff to the SB stuff.

http://www.dynoman.net/carb/inMani.html

They are a lot more money; And they were on backorder 6/13/2011. Call for availability.

I think SudCO.com may have them.  On the other hand, DynoMan probably buys them from Sudco.
« Last Edit: September 21, 2011, 12:30:54 pm by MCRider »
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: inlet rubbers for 29mm smoothbores
« Reply #4 on: September 21, 2011, 04:43:18 pm »
oops, sorry I was thinking CR29's. Thanks Ron.
Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: inlet rubbers for 29mm smoothbores
« Reply #5 on: September 21, 2011, 04:57:40 pm »
Quote from: brandEn on September 21, 2011, 04:43:18 pm
oops, sorry I was thinking CR29's. Thanks Ron.
No prob.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."
Pages: [1]   Go Up
« previous next »