« previous next »
Pages: [1]   Go Down

Author Topic: Are REPOP Tappet Covers Ok?  (Read 1175 times)

0 Members and 1 Guest are viewing this topic.

Offline CBNJ74

  • Hot Shot
  • ***
  • Posts: 297
  • Sweep the leg!
Are REPOP Tappet Covers Ok?
« on: September 29, 2011, 07:29:54 AM »
Looking to replace the chromed finned ones that came with the bike.

I found a set of 8 on Ebay for $50. The seller has informed me that they are repop. I've already had one bad experience purchasing parts for my CB on ebay and I'd like to avoid another.

Is there anything I should be leary of? Also do I need to do anything special when installing them? or do they just screw on?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=200618709269&ssPageName=ADME:X:RTQ:MOTORS:1123
Logged
1973 Honda CB750K
1983 Honda VF750 Interceptor
2005 Triumph Thruxton
2012 Ducati Monster 1100evo

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,508
  • To many bikes-but lookin' for more
Re: Are REPOP Tappet Covers Ok?
« Reply #1 on: September 29, 2011, 07:33:03 AM »
Those look OK. Maybe put a little light lube on the o-ring and do not over tighten them.
Logged

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,612
  • Big ideas....
Re: Are REPOP Tappet Covers Ok?
« Reply #2 on: September 29, 2011, 07:46:34 AM »
 The hreads can be rough. They also contain a lot of zinc which makes them difficukt to polish (if that is the look you are after.
Logged
Owner of the "Million Dollar CB"

Offline CBNJ74

  • Hot Shot
  • ***
  • Posts: 297
  • Sweep the leg!
Re: Are REPOP Tappet Covers Ok?
« Reply #3 on: September 29, 2011, 07:50:55 AM »
Anything is better than those chrome finned monstrosities. I'm fine with the finish. The bike isn't concourse but she photographs well and is a solid runner.
Logged
1973 Honda CB750K
1983 Honda VF750 Interceptor
2005 Triumph Thruxton
2012 Ducati Monster 1100evo

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Are REPOP Tappet Covers Ok?
« Reply #4 on: September 29, 2011, 07:52:09 AM »
Those are still available from Honda fo $6.90 each = $55.20. No questions asked. You'd need some ORIngs I supose. Hardware items should be cheap.

If you posted a classified, I'll bet you'd get someone to trade you the chrome finned ones for stockers.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline CBNJ74

  • Hot Shot
  • ***
  • Posts: 297
  • Sweep the leg!
Re: Are REPOP Tappet Covers Ok?
« Reply #5 on: September 29, 2011, 07:57:46 AM »
Quote from: MCRider on September 29, 2011, 07:52:09 AM
Those are still available from Honda fo $6.90 each = $55.20. No questions asked. You'd need some ORIngs I supose. Hardware items should be cheap.

If you posted a classified, I'll bet you'd get someone to trade you the chrome finned ones for stockers.

No kidding! I'd rather order from Honda. I'm ordering a complete gasket set from CycleX so I can use the ones from there. Where did you get that $6.90 price?
Logged
1973 Honda CB750K
1983 Honda VF750 Interceptor
2005 Triumph Thruxton
2012 Ducati Monster 1100evo

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Are REPOP Tappet Covers Ok?
« Reply #6 on: September 29, 2011, 08:00:35 AM »
http://www.motogrid.com/pages/oemparts?aribrand=HOM#/Honda/CB750K3_A__MOTORCYCLE%2c_JPN%2c_VIN%23_CB750-2200001/CYLINDER_HEAD_COVER/CB750K3-JPN-A/2Y143413E14341301C

Don't know if that link is the exact page or not. If not, navigate around to find the "cylinder head cover". My favorite OEM supplier, but others are just as good or better.

I got my gaskets from CycleX as well, you're right the ORings are in there.
« Last Edit: September 29, 2011, 08:02:12 AM by MCRider »
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline CBNJ74

  • Hot Shot
  • ***
  • Posts: 297
  • Sweep the leg!
Re: Are REPOP Tappet Covers Ok?
« Reply #7 on: September 29, 2011, 08:03:01 AM »
Perfect! this forum and everyone who contributes  ROCKS!

Thanks Everyone!
Logged
1973 Honda CB750K
1983 Honda VF750 Interceptor
2005 Triumph Thruxton
2012 Ducati Monster 1100evo

Offline doobiebro

  • Enthusiast
  • **
  • Posts: 127
Re: Are REPOP Tappet Covers Ok?
« Reply #8 on: September 29, 2011, 08:09:29 AM »
I have been looking for tappet covers also and found a less expensive set, however they don't include the o-rings.  See http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270665019882&ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 - only $25.
Logged

Offline CBNJ74

  • Hot Shot
  • ***
  • Posts: 297
  • Sweep the leg!
Re: Are REPOP Tappet Covers Ok?
« Reply #9 on: September 29, 2011, 08:12:24 AM »
Quote from: doobiebro on September 29, 2011, 08:09:29 AM
I have been looking for tappet covers also and found a less expensive set, however they don't include the o-rings.  See http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270665019882&ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 - only $25.

Thailand? Did you buy them? are you sure they're on the up and up?

Thanks!
« Last Edit: September 29, 2011, 08:14:11 AM by CBNJ74 »
Logged
1973 Honda CB750K
1983 Honda VF750 Interceptor
2005 Triumph Thruxton
2012 Ducati Monster 1100evo

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Are REPOP Tappet Covers Ok?
« Reply #10 on: September 29, 2011, 08:19:05 AM »
My 2ยข: With 5000+ transactions they are likely fine. But my personal criteria on ebay is for 99% positive feedback.

I ordered some grips from an outfit in China, off ebay. Got them quickly (10days) no problem. But the distance and variables cause concern, you'd want to be prepared to wait.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline doobiebro

  • Enthusiast
  • **
  • Posts: 127
Re: Are REPOP Tappet Covers Ok?
« Reply #11 on: September 29, 2011, 08:39:10 AM »
I haven't yet purchased them.  It is one of those low priority, nice to have, type of want rather than a true need.  I too am somewhat leary of the Thailand, Vietnam, and China suppliers but often a price decision can override my doubts.  This would be one of those decisions in which I would have to consider whether the price savings is worth the risk of a bad purchase.  And, I really hate making decisions.
Logged

Offline DedHed

  • Boob
  • Enthusiast
  • **
  • Posts: 123
Re: Are REPOP Tappet Covers Ok?
« Reply #12 on: September 29, 2011, 10:17:04 AM »
FWIW.... I have had decent luck hitting the local (Within 50 miles) bike junk yards. I had a tappet cover that was stripped by the PO and went o a junk yard and found 4 that were in decent shape. Polished those bad boys up and so far so good...
I paid the guy a whole $5 for four of them.
Phil
Logged
CB750 K4

Offline CBNJ74

  • Hot Shot
  • ***
  • Posts: 297
  • Sweep the leg!
Re: Are REPOP Tappet Covers Ok?
« Reply #13 on: September 29, 2011, 10:22:59 AM »
Quote from: DedHed on September 29, 2011, 10:17:04 AM
FWIW.... I have had decent luck hitting the local (Within 50 miles) bike junk yards. I had a tappet cover that was stripped by the PO and went o a junk yard and found 4 that were in decent shape. Polished those bad boys up and so far so good...
I paid the guy a whole $5 for four of them.
Phil

There are ZERO bike salvage yards in New Jersey. The closest one I know of is in Baltimore MD.
Logged
1973 Honda CB750K
1983 Honda VF750 Interceptor
2005 Triumph Thruxton
2012 Ducati Monster 1100evo

Offline DedHed

  • Boob
  • Enthusiast
  • **
  • Posts: 123
Re: Are REPOP Tappet Covers Ok?
« Reply #14 on: September 29, 2011, 10:27:35 AM »
Quote
There are ZERO bike salvage yards in New Jersey. The closest one I know of is in Baltimore MD.

Going out to a few this weekend .... I'll shoot a note your way if'n I find any.
Phil
Logged
CB750 K4

Offline CBNJ74

  • Hot Shot
  • ***
  • Posts: 297
  • Sweep the leg!
Re: Are REPOP Tappet Covers Ok?
« Reply #15 on: September 29, 2011, 10:29:53 AM »
Quote from: DedHed on September 29, 2011, 10:27:35 AM
Quote
There are ZERO bike salvage yards in New Jersey. The closest one I know of is in Baltimore MD.

Going out to a few this weekend .... I'll shoot a note your way if'n I find any.
Phil

Thanks man!
Logged
1973 Honda CB750K
1983 Honda VF750 Interceptor
2005 Triumph Thruxton
2012 Ducati Monster 1100evo
Pages: [1]   Go Up
« previous next »