Author Topic: Project Just started CB400F AND MORE! (Read 16596 times)

dawdish · « **Reply #25 on:** January 02, 2012, 10:20:03 PM »

The Mini Switch has to run through a relay, the wires from the switch are very thin. I havent finished my electrics as of yet, but if the switch is installed as a ground side switch it should be fine. This switch has been being sold to be used on Harley's starter systems. The hoop just seems to finish off the frame.

dawdish · « **Reply #26 on:** January 04, 2012, 08:58:30 PM »

So tell me what you think, should I weld the plate on top of the hoop, or under it?

Retro Rocket · « **Reply #27 on:** January 04, 2012, 09:01:41 PM »

Just remember that the rear brace that you have removed was shaped the way it is to give clearence to the rear tire, you should weld the plate on top but don't be surprised if the tire hits it when riding....

dawdish · « **Reply #28 on:** January 04, 2012, 09:20:04 PM »

That makes TOTAL sense

!

dawdish · « **Reply #29 on:** January 06, 2012, 06:04:19 AM »

I have another question, Is there any reason I cant relocate the coils to under the seat? Do they have to be right next to the head?

Tews19 · « **Reply #30 on:** January 06, 2012, 09:12:52 AM »

Quote from: dawdish on January 06, 2012, 06:04:19 AM

I have another question, Is there any reason I cant relocate the coils to under the seat? Do they have to be right next to the head?

I've read in a few post of people moving their coils under the seat

MoMo · « **Reply #31 on:** January 06, 2012, 05:12:59 PM »

Quote from: dawdish on January 06, 2012, 06:04:19 AM

I have another question, Is there any reason I cant relocate the coils to under the seat? Do they have to be right next to the head?

How do you plan to extend the wires?...Larry

Owned · « **Reply #32 on:** January 06, 2012, 06:39:07 PM »

Why on earth would you need to move the coils? Are they in the way or something???

dawdish · « **Reply #33 on:** January 06, 2012, 06:58:00 PM »

Yes they are...I have installed a 500T tank, to me it has a beautiful line, but no room for the coils. Now, I can relocate them to just under the tank, towards the front upright, but I have been working toward a "clean uncluttered" look. So I was hopeful to move them under the seat.
Now I have a confession, I havent even looked at whether the wires in the coils can be replaced, I hope so as I know one is ready to break off $:-\$ So Photolar, you must have a point to your question?

MoMo · « **Reply #34 on:** January 06, 2012, 07:27:31 PM »

Quote from: dawdish on January 06, 2012, 06:58:00 PM

Yes they are...I have installed a 500T tank, to me it has a beautiful line, but no room for the coils. Now, I can relocate them to just under the tank, towards the front upright, but I have been working toward a "clean uncluttered" look. So I was hopeful to move them under the seat.
Now I have a confession, I havent even looked at whether the wires in the coils can be replaced, I hope so as I know one is ready to break off $:-\$ So Photolar, you must have a point to your question?

You would have to extend the wires, which can be done but not easily or you could get aftermarket coils that use separate wires, the latter could be somewhat pricey. One of my 750's has Accel coils, on which one could add whatever length coil wires necessary. Just food for thought and probably more money to the build...Larry

dawdish · « **Reply #35 on:** January 24, 2012, 08:57:22 PM »

Been a while but I have been ordering parts and doing some more modifications. I would like to thank member Andrew, who is building a 550, for all the help his posts have provided. I got the starter button idea, and the seat mod info from him

The seat pan fit was really wide for the frame, so as per Andrew, I narrowed it and re-fiber glassed it, and now the fits is perfect. I also picked up a Ballistic battery and now I can finish the electrics.

dawdish · « **Reply #36 on:** January 24, 2012, 08:59:49 PM »

This is how it looks when done

dawdish · « **Reply #37 on:** January 24, 2012, 09:03:03 PM »

Added 3 layers of glass on the bottom to reinforce the seat.

dawdish · « **Reply #38 on:** February 18, 2012, 07:36:36 AM »

Ok, so you have seen the 500T tank i got a "great" deal on on ebay. I love that shape and it fits well...that said, the amount of money I'm spending on it to make it usable is getting crazy! After 2 treatments, of drywall screws and the Works, which does work well, the tank has some kind of old sealer in it that is flaking off. So I sent it over to my buddy's radiator shop and he soaked it in a hot tank for a week. That helped but that brought out some rust pin holes on the bottom edge, and now it looks as though I'll have to reseal the tank anyway

Lesson learned...spend the money on a good tank!

dawdish · « **Reply #39 on:** February 18, 2012, 07:41:12 AM »

For some reason I can never post more than one pic at a time, even thought the're under 600 k so bear with me.

dawdish · « **Reply #40 on:** February 18, 2012, 07:45:26 AM »

As you can see I cut out the emblem mount, behind it was rust galore, so I blasted that out.

dawdish · « **Reply #41 on:** February 18, 2012, 07:46:44 AM »

Sanded and ready for fill.

dawdish · « **Reply #42 on:** February 18, 2012, 07:48:39 AM »

Filled the detent with kitty hair and doing a skim coat on the whole tank.

dawdish · « **Reply #43 on:** February 27, 2012, 05:55:53 AM »

So, I just have to voice my frustration...Found a great buy on Craigslist, a 550. The guy sent me pictures, I told him I'd be in his town that day, I drove 3 hrs, with cash in hand....
I get there, he says..." I changed my mind".... Thanks alot

dawdish · « **Reply #44 on:** March 01, 2012, 07:23:09 PM »

So today, I'm driving through the county, and a glint of "shinny" catches my eye. I picked up 2 550's. rough but there. True barn finds!

dawdish · « **Reply #45 on:** March 01, 2012, 07:33:47 PM »

And #2

Kwality · « **Reply #46 on:** March 01, 2012, 08:27:48 PM »

To (badly) parphrase Hunter S Thompson:

We had one 400F, two 500F's and three 750F's. Not that we needed all those bikes, but once you get locked into a serious bike collection, the tendency is to push it as far as you can.

Well done!

Tews19 · « **Reply #47 on:** March 01, 2012, 09:51:45 PM »

the first one looks like serious frame mods went on. Second looks to be a nice 75 or 75 550F. What kind of shape is the muffler on that one?

Mugen_Stumpo · « **Reply #48 on:** March 02, 2012, 02:57:50 AM »

the first one is totally win... restore it the way it's now

wedoo2 · « **Reply #49 on:** March 02, 2012, 04:10:15 AM »

Ooooo Choppa!

News:

Author Topic: Project Just started CB400F AND MORE! (Read 16596 times)