Author Topic: My lil' Twin - A 1974 Honda CB360T Rebuild (Read 34356 times)

Rocker · « **on:** October 03, 2011, 01:36:48 PM »

I was casually browsing Craigslist earlier this year when I saw this gem. It was a 1974 CB360T bike in relatively good shape. It came with a mostly complete (except for tins) parts bike, tons of spare parts, and a lot of work already done. This is how it was as purchased:

Parts bike & parts:

I could not decide what I wanted to do with it. A few times I thought about reselling it for parts and rolling that into another project. A few months passed and I decided to keep it. Let the breakdown begin!

The frame and other parts had their usual rust and gunk:

Applied some de-greaser:

Back from sandblaster:

Primed:

First/second coat of gloss black enamel:

I have one more coat to spray then time for clear coat.

Motor before Purple Power, garden hose, nylon brush, and mineral spirits:

After:

One of the many forth coming upgrades:

.....to be continued

MoMo · « **Reply #1 on:** October 03, 2011, 03:32:12 PM »

360 Hondas were one of the most sold bikes ever, especially during the first "gas shortage"-the one when people were shooting each other while waiting in lines. It looks like you have a great foundation...Larry

lucky · « **Reply #2 on:** October 03, 2011, 03:58:13 PM »

Quote from: photolar on October 03, 2011, 03:32:12 PM

360 Hondas were one of the most sold bikes ever, especially during the first "gas shortage"-the one when people were shooting each other while waiting in lines. It looks like you have a great foundation...Larry

If you remember that first "gas shortage" you must be my age.
Anyway it was terrible because you could not pump your own gas in some places and there were long lines often for blocks. Then some dumb ass would drive up in a pick up truck and start filling a 55 gallon drum in view of many people waiting in line and all the people were sitting there in 100º+ heat it did get scary and tempers flared and yelling would start.
People started hoarding gasoline and there were many fires at houses from gasoline igniting. The price of cars dropped to almost nothing.

All this went on for a couple of months or so.

Here it is all these years later and we still have gasoline.
Many people felt betrayed by the government. The military did not run out of gas.
They bought extra gas in the months preceding this "gas shortage"

Some people were sitting in their car with the air conditioning on waiting to get gas. I felt sorry for them. But some were old people and that heat would kill them. It got up to 114º for a couple weeks in August in Tucson ,Ariz.

The most valuable thing then, was a Bicycle.
People selling bicycles made a killing.

MoMo · « **Reply #3 on:** October 03, 2011, 06:15:38 PM »

At the shop I worked we were making a killing selling 360s. The salesmen were sizing up the customer(many had never ridden a motorcycle before

) and adding whatever they felt like they could get away with to the suggested list. I'll be 65 way too soon...Larry

Rocker · « **Reply #4 on:** October 04, 2011, 01:14:15 PM »

Second and final coat of clear is drying for all parts minus the frame. I will get to it tomorrow. It's not a pro paint job by any means but it looks much better then it did before.

cb650 · « **Reply #5 on:** October 04, 2011, 04:26:04 PM »

Looks good. I like the pipes. First thing I did to mine is make shorties. Did u research
the cam chain tensioner problems?

Rocker · « **Reply #6 on:** October 06, 2011, 02:14:33 PM »

Cleaning up the motor with Eagle One cast aluminum cleaner:

I have some extra engine case covers. Trying to decide how I want to do the motor: leave it rough aluminum, paint, or polish.

The frame looks like new so I am probably going to rule out the rough aluminum look. Will go for something clean.

Rocker · « **Reply #7 on:** October 09, 2011, 02:43:11 PM »

Cleaned and prepped for paint

Rocker · « **Reply #8 on:** October 10, 2011, 07:43:50 AM »

Primed and ready for paint:

Rocker · « **Reply #9 on:** October 10, 2011, 02:17:14 PM »

Primed the underside of motor:

Attached swing arm, rear shocks, inner fender, and owners manual box. Also cleaned all motor mount brackets and bolts:

Hagon's baby!

Rocker · « **Reply #10 on:** October 11, 2011, 09:15:51 AM »

Painted underside of motor:

Still trying to decide if I want to paint the lower cylinder vents black.

toytuff · « **Reply #11 on:** October 11, 2011, 12:16:22 PM »

Very nice indeed!

I picked up a 1973 350G a couple of weeks ago. Fun little bike. I named it "scooter".

tt

Rocker · « **Reply #12 on:** October 11, 2011, 12:39:58 PM »

Completed silver paint on top half of motor. It's not perfect by any means. There are a few bubbles and other areas that I will need to touch up later on I am sure but looks better then it did:

There are some really rusty nuts/bolts and a motor mount bracket that even the wire wheel is not working that well on. They need a soak in my easy rust removal method:

See link to 'how-to' thread here: http://forums.sohc4.net/index.php?topic=82103.msg922888#msg922888

.....to be continued

burnoutking1971 · « **Reply #13 on:** October 11, 2011, 12:47:32 PM »

Nice score and the extra swag with the bike is great. Looks like it's coming along nicely.

Rocker · « **Reply #14 on:** October 12, 2011, 01:19:51 PM »

My super duper high tech drying/de-fuming system:

Keeping it real in my kitchen:

Sheik Yerbouti · « **Reply #15 on:** October 12, 2011, 02:49:45 PM »

Nice backsplash

Rocker · « **Reply #16 on:** October 13, 2011, 07:49:53 AM »

Painted the points cover black to match stock. The motor is ready to be put in the frame.

Cevan · « **Reply #17 on:** October 13, 2011, 10:45:49 AM »

Nice 360. I've got a '74 360G. That was my first bike restoration.

Rocker · « **Reply #18 on:** October 13, 2011, 12:15:15 PM »

Very nice. Well done!

Rocker · « **Reply #19 on:** October 14, 2011, 02:21:20 PM »

Frame is prepped to mount engine. I don't want any dings or scratches on my new paint:

Rocker · « **Reply #20 on:** October 15, 2011, 03:00:08 PM »

Motor mounted and front forks on:

Rocker · « **Reply #21 on:** October 20, 2011, 01:23:55 PM »

The first of my parts have started arriving. This little pain in the rear only took 20 mins to install. The inner diameter claimed on the website was a bit smaller in reality. I had to do a little modification. But it looks awesome.