Topic: I Need Info On Any Other Rear Sprocket Working On My '72 SL350

[bill440cars]

        You see, I'm wanting to drop a few teeth from the rear sprocket on my SL350 and I need to know IF the sprockets from the CB/CL350 (or any others, for that matter)will bolt up on my SL wheel. The '72 SL350K2 carries a 42 tooth rear sprocket and the K1, uses a 40 tooth, but I haven't located a K1 rear sprocket. So, if I could find out what other sprockets would work, I could have a better chance of getting a smaller one than I have AND be able to cruise easier, with lower engine speeds and should still have enough power to plunk around off road. Thanks for any input here,  Bill 

[bill440cars]

  So, I guess no one has a clue and I'll just have to get a rear sprocket for a CB/CL 350 and see what happens. Thanks anyway.

[Danno]

take measurements off the inside hub hole and of the bolt holes then go to a sprocket manufacturer and ask them if you can't find a stock one to buy they can make you one

[grcamna2]

There's a company called Sprocket Specialists that  has a rear sprocket for your bike,
they're in Ca. ...but I hear they are expensive.