Author Topic: starter knowledge anyone?  (Read 1013 times)

0 Members and 1 Guest are viewing this topic.

Offline 1974blaze

  • Enthusiast
  • **
  • Posts: 139
starter knowledge anyone?
« on: October 19, 2011, 08:07:52 PM »
its a '80 cb400

starter spins freely out of the bike.  sounds like its trying but not succeeding in the bike.  motor not seized. 

any thoughts?

also, starter switch is broken.  if i cross the black/white and yellow red in the switch is that the same as pushing the button?  new switch on order.

thanks all.


Offline Danno

  • Hot Shot
  • ***
  • Posts: 715
  • 74 CB550,75 GL1000,76 KZ400,77 GL1000,73 CB750
Re: starter knowledge anyone?
« Reply #1 on: October 19, 2011, 09:39:47 PM »
sounds like you need a new solonoid or you need to take it out and take it apart and clean it
when you own a motorcycle the wife does not have to find you handy she just has to find you

Offline 1974blaze

  • Enthusiast
  • **
  • Posts: 139
Re: starter knowledge anyone?
« Reply #2 on: October 20, 2011, 06:19:05 AM »
will try that today.  thanks.

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,274
  • Humboldt, AZ
Re: starter knowledge anyone?
« Reply #3 on: October 20, 2011, 10:36:20 AM »
If you take the starter apart, check the brushes for wear. If they are worn out, the starter will crank slow under load, just like with a bad battery.
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline 1974blaze

  • Enthusiast
  • **
  • Posts: 139
Re: starter knowledge anyone?
« Reply #4 on: October 21, 2011, 10:14:35 AM »
update.

if power is sent straight to starter while installed it just hums.  same if i cross the solenoid poles with a screwdriver. 

if power is sent to starter out of the bike it spins freely. 

what's the hum? stuck gear in the engine?

trying to fix and sell for a friend.  thoughts appreciated. 

thanks.