« previous next »
Pages: [1]   Go Down

Author Topic: 750 Rear Fender  (Read 670 times)

0 Members and 2 Guests are viewing this topic.

Offline bjatwood

  • I never claimed to be an
  • Expert
  • ****
  • Posts: 976
  • 1973 CB750-K3
    • Minbikers Proboards
750 Rear Fender
« on: October 23, 2011, 08:23:41 AM »
Why did Honda put a hole in the rear fender below the license plate? Was it for a rack or something else? I know you experts here will know the answer.... ;)
Logged
Brian
#24193

I believe that the Finest things are the most thoughtfully made, not the most expensive!
http://minibikers.proboards.com/

Offline Magpie

  • Old Timer
  • ******
  • Posts: 3,328
Re: 750 Rear Fender
« Reply #1 on: October 23, 2011, 08:26:05 AM »
For a little rubber snubber to stop the plate from damaging the fender.
Cliff.
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,050
Re: 750 Rear Fender
« Reply #2 on: October 23, 2011, 08:52:42 AM »
 I think it was actually to prevent plate cracking from vibration, except we dont get a lot of that.
 I suspect that some plates are made of dead soft aluminum, ie 0 temper, and  crack fairly easily, in some cases.

 The rubbet tit looks a cone..
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline bjatwood

  • I never claimed to be an
  • Expert
  • ****
  • Posts: 976
  • 1973 CB750-K3
    • Minbikers Proboards
Re: 750 Rear Fender
« Reply #3 on: October 23, 2011, 05:35:06 PM »
License plate eh? My plate is a good 2" higher than that hole.....
Are the "tits" still available?
« Last Edit: October 23, 2011, 05:43:46 PM by bjatwood »
Logged
Brian
#24193

I believe that the Finest things are the most thoughtfully made, not the most expensive!
http://minibikers.proboards.com/

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 20,234
  • Saver of unloved motorcycles.
Re: 750 Rear Fender
« Reply #4 on: October 23, 2011, 05:50:03 PM »
it's funny they are below the plate.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline Rigid

  • She likes a
  • Expert
  • ****
  • Posts: 821
  • Speak from personal experience, or don't
    • KingCustomCycles
Re: 750 Rear Fender
« Reply #5 on: October 23, 2011, 05:51:51 PM »
Quote from: bjatwood on October 23, 2011, 05:35:06 PM
License plate eh? My plate is a good 2" higher than that hole.....
Are the "tits" still available?

I have found tits to still be available, but as I have gotten older, they interest me less than a nicely restored Honda.  The Honda is certainly less trouble.
Logged
36 years of this stuff, here to help.

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,508
  • To many bikes-but lookin' for more
Re: 750 Rear Fender
« Reply #6 on: October 23, 2011, 05:54:58 PM »
Plates at least here in Michigan have gotten smaller. Some guys register bikes as 'antique'here,buy one plate and never have to again. You buy an original plate from your year and register those numbers. Kind of cool seeing the old bigger plates.
Logged

Offline bjatwood

  • I never claimed to be an
  • Expert
  • ****
  • Posts: 976
  • 1973 CB750-K3
    • Minbikers Proboards
Re: 750 Rear Fender
« Reply #7 on: October 23, 2011, 06:51:14 PM »
Quote from: Rigid on October 23, 2011, 05:51:51 PM
I have found tits available, but as I have gotten older, they interest me less than a nicely restored Honda. 

Now that is telling your age for sure! I still would stop for a look.............
Logged
Brian
#24193

I believe that the Finest things are the most thoughtfully made, not the most expensive!
http://minibikers.proboards.com/
Pages: [1]   Go Up
« previous next »