« previous next »
Pages: [1]   Go Down

Author Topic: 1975 CB750f HELP!  (Read 921 times)

0 Members and 1 Guest are viewing this topic.

Offline desert rat racer

  • Full Member
  • *
  • Posts: 16
1975 CB750f HELP!
« on: October 24, 2011, 07:06:53 PM »
Hey everybody, need some help!

I'm restoring a '75 CB750F and need a new cylinder head cover.

Anyone know where I can find one? Or if I can use a different year/model cylinder head cover?

Thanks guys!
Logged

Offline immortal

  • Enthusiast
  • **
  • Posts: 247
    • 1976 CB750F "Pegasus bike"
Re: 1975 CB750f HELP!
« Reply #1 on: October 25, 2011, 06:05:43 PM »
I would try Ebay that's where I get a lot of used parts. Be sure to ask the seller if he would be so kind as to put a straight edge on it to make sure it is not warped before buying. There are a few in the forums  that "assumed" like myself that the cover was flat only to find when the engine is back in the frame there is a "front of cover oil leak"....which I think happens more often on the chrome covers....also make sure you put the new gasket the right way up too and do a really good job of the install or you will be pulling your hair out like I and others!....Good luck with it!
Logged
Sometimes...the hard thing and the right thing are the same thing!

1976 CB750F "Pegasus Bike"

http://forums.sohc4.net/index.php?topic=80492.0

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,912
  • Bought her new 4/75
Re: 1975 CB750f HELP!
« Reply #2 on: October 25, 2011, 08:41:49 PM »
If you are talking about what I call the valve cover then any of them should fit.
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)
Pages: [1]   Go Up
« previous next »