Author Topic: Exhaust Photo Reference Library. (Read 76533 times)

flybox1 · « **Reply #100 on:** January 31, 2013, 02:11:35 PM »

Quote from: 736cc on January 02, 2013, 05:58:34 AM

HAPPY NEW YEAR!
CB750 YOSHIMURA CAFE SOUND BITE

736cc....great sounding yosh, but the last 5 seconds are priceless!! LMAO

wowbagger · « **Reply #101 on:** March 05, 2013, 01:14:10 PM »

Can anyone put a name to my pipes? I didn't see any in this thread that matched. I did just see a 750 go by on the forum that had the same pipes but I can't find the thread again.

Ace2cool · « **Reply #102 on:** March 05, 2013, 06:46:38 PM »

Quote from: bjatwood on November 16, 2011, 04:49:25 PM

Quote from: CB750K4 on November 16, 2011, 12:11:57 PM
bjatwood, Those are Jardine slip-on mufflers.
I have a set on my bike that are rusting out and would LOVE to find a new set.

Does anyone make new baffles for Jardine's?

Also would like an answer to this. Didn't see one in the thread. Mine are gutted and rusted. Would like to replace the baffles, as I like the look of the muffler, and would most likely be a lot cheaper.

george · « **Reply #103 on:** March 05, 2013, 08:18:59 PM »

Winning Performance , circa 1979 on my K8. The poor man's Kerker, supposed to be the same pipe , different badges, sounded great !

Stev-o · « **Reply #104 on:** March 05, 2013, 08:21:07 PM »

Hey George - how much was it back then, you remember?
The Kerkers are $700 now.

george · « **Reply #105 on:** March 05, 2013, 08:27:14 PM »

Circa 2012 Vance & Hines SuperSport pipe , actually made for DOHC bikes but like the SideWinder , it fit ! The Big can aint my favorite and it is going away soon. Replacing it with the CycleX reverse cone.

george · « **Reply #106 on:** March 05, 2013, 08:31:54 PM »

Quote from: Stev-o on March 05, 2013, 08:21:07 PM

Hey George - how much was it back then, you remember?
The Kerkers are $700 now.

Oh Hell Steve , I worked after my real job at a small shop for parts and shop time. The Kerkers wholesale were about 275.,, the winning perf pipe was a whopping 125. !!!! Guess which one sold the most ? That was alot of money !! Gas was about .72 for regular!

Harsh · « **Reply #107 on:** March 06, 2013, 03:36:45 AM »

Quote from: george on March 05, 2013, 08:27:14 PM

Circa 2012 Vance & Hines SuperSport pipe , actually made for DOHC bikes but like the SideWinder , it fit ! The Big can aint my favorite and it is going away soon. Replacing it with the CycleX reverse cone.

George...you can get that reverse cone from http://www.coneeng.com/ for less. That is where Cycle X and DCC get them from.

754 · « **Reply #108 on:** March 06, 2013, 07:26:08 AM »

I am thinking the Winning was more like 40 - 70 less than Kerker.
Hookerchrome 4-1 cost about 125 or so in1975 up here..

george · « **Reply #109 on:** March 07, 2013, 08:35:33 PM »

Quote from: Harsh on March 06, 2013, 03:36:45 AM

Quote from: george on March 05, 2013, 08:27:14 PM
Circa 2012 Vance & Hines SuperSport pipe , actually made for DOHC bikes but like the SideWinder , it fit ! The Big can aint my favorite and it is going away soon. Replacing it with the CycleX reverse cone.

George...you can get that reverse cone from http://www.coneeng.com/ for less. That is where Cycle X and DCC get them from.

Awesome , thanks for the info !

Reganator · « **Reply #110 on:** April 23, 2013, 12:21:55 PM »

I haven't seen my exhaust anywhere on this list. I happen to already know that it is a Kerker, it has the stamp on the mounting plate, but I wouldn't mind knowing more about it if there is anything interesting to know.

[img width= height= alt=" title="Hosted by imgur.com]http://i.imgur.com/jDJ5Fxu.jpg[/img]

Edit.. better picture...

[img width= height= alt=" title="Hosted by imgur.com]http://i.imgur.com/WIK29ka.jpg[/img]

Dunk · « **Reply #111 on:** April 23, 2013, 02:11:33 PM »

Quote from: MCRider on November 03, 2011, 11:02:07 AM

This is the "Triple A" spaghetti pipe. The four headers were individual pipes. it was a bit of a puzzle to assemble as they wrapped around each other more than any other pipe. They were only available, best i know, from 1970 to 1972. They are on my 1971 K1 which i bought in April 1971. Totalled it, rebuilt it, rode it to Ft Lauderdale, worked in a shop (Burke's Honda, #3 in national sales) and rebuilt it as shown, rode back to Indiana, and it was stolen in July 1972. fast life. The picture was taken in April 1972.

It had a long straight megaphone, non-removable baffle, and a simply delicious sound. The short production run kept it from ever being a part of many Exhaust Pipe "shoot outs" written by the magazines of the time. The excessive wiggliness of the headers was to assure they were "equal length". All the rage back then.

Some one else on the forum scored a bike with one of these pipes on it within the last year or so. maybe he'll see this and post a more up to date picture with broken down details.

I believe this is the same header but a different collector/muffler?

754 · « **Reply #112 on:** April 23, 2013, 03:19:31 PM »

Are they for sale ?

setdog · « **Reply #113 on:** April 24, 2013, 06:17:27 AM »

Can anyone identify my exhaust?

Kerker headers? Jardine? I do not know.

MCRider · « **Reply #114 on:** April 24, 2013, 06:29:22 AM »

Cadunkle: Yes yours are the Triple A spaghetti pipes. They had a long and short megaphone option. So yours is the short one. Still a Triple A pipe.

MRieck · « **Reply #115 on:** April 24, 2013, 07:57:32 AM »

Quote from: Dream750 on January 24, 2013, 01:41:26 AM

I would almost bet those are “Dick’s Cycle West” exhaust. If that’s the case, then those are quite rare as Dick’s was a short lived business who marketed his “Racer 1” line of café parts around 1973-74. The pipes in the ad look to be for a Kaw 900, but also has some features found in your Honda 750 exhaust. I would keep them until a 100% positive ID can be made.

Dick's was still alive in 1978 as I got a t shirt at that time.

Swoop · « **Reply #116 on:** April 24, 2013, 08:33:50 AM »

And for you Canadians....a Nelson Exhaust

Scott S · « **Reply #117 on:** July 17, 2013, 07:11:47 PM »

Any idea what this is? It was on a CB550.

Harsh · « **Reply #118 on:** July 19, 2013, 06:02:09 AM »

Pic isn't showing for me.

Scott S · « **Reply #119 on:** July 19, 2013, 05:20:30 PM »

Sorry, fixed that. Something funky is up with Photobucket lately. Pics going into different albums and such.

kyre · « **Reply #120 on:** July 19, 2013, 06:27:40 PM »

CB400F YRS Yoshima Racing Service exhaust

derp · « **Reply #121 on:** February 12, 2014, 03:20:23 PM »

Quote from: ACVWguy on May 02, 2012, 02:01:01 PM

Anyone know what these babies are?

I bought them NOS off ebay last summer for $175
I can't even describe the sound they make... eargasmic...

They are a 4-2 crossover design with an integrated fiberglass baffle. They are nice and rumbley at idle, sound almost like a subaru under load and you can hear them from a mile away. And they still don't hurt my ears.

Bumping this, I also have what looks like the same headers but different muffler.. Anyone know who made these?

Garage_guy_chris · « **Reply #122 on:** February 12, 2014, 08:52:47 PM »

I like the thread. I have one to add. this came on my 74 750. the header is unmarked but the muffler has "Jardine" stamped in the stay that goes to the footpeg bracket. the whole exhaust is very close to the Kerker systems aswell

Chachi · « **Reply #123 on:** February 14, 2014, 06:39:01 AM »

I'm trying to ID or gather any info I can on my 750 K3 exhaust. I'm planning on pulling it to polish and I was going to install fresh copper gaskets and replace the old allen head bolts with new ones (stainless?). Since these are not stock headers, is this mounting method OK? According to the parts fiche, the K3 headers mounted with phillips screws (8x22) -- I guess someone just replaced with allen head? Also, it did not come with the joints (outer fancy looking flange) -- am I OK mounting these like they are without them? And if it helps for ID, the muffler does have a removable baffle secured by an allen head.

MCRider · « **Reply #124 on:** February 14, 2014, 07:06:19 AM »

The early CB750s had spigots in the head held in by the flat head Phillips. Then the pipe slipped over the spigots and was held on by the finned clamps. Then aftermarket pipe people changed that to removing the spigot, inserting the header straight into the head and holdinng it on with a flange on the header and 2 bolts (allens or whatever) run into the holes where the phillipis used to go to hold the spigots in.

Either works fine. Honda converted away from the spigots later on anyway.

News:

Author Topic: Exhaust Photo Reference Library. (Read 76533 times)

Swoop