« previous next »
Pages: [1]   Go Down

Author Topic: Are valves matched to their seat?  (Read 2097 times)

0 Members and 3 Guests are viewing this topic.

Offline Scott S

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 8,232
Are valves matched to their seat?
« on: November 01, 2011, 02:35:32 PM »
 What I mean is, if I disassemble a head for cleaning and porting/polishing, do I need to keep the valves with the cylinder/seat they came out of?

 They will be, at the least, lapped before being reinstalled.
Logged
'71 CB500 K0
'17 Triumph Street Scrambler
'81 Yamaha XS650

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,019
  • WHAT?no gravy?
Re: Are valves matched to their seat?
« Reply #1 on: November 01, 2011, 02:44:31 PM »
yes you MUST keep each valve in its original seat.
Logged

Offline Rigid

  • She likes a
  • Expert
  • ****
  • Posts: 821
  • Speak from personal experience, or don't
    • KingCustomCycles
Re: Are valves matched to their seat?
« Reply #2 on: November 01, 2011, 02:54:49 PM »
If you are renewing the guides and cutting the seats, No.  If you are only lapping the valves, yes.
Logged
36 years of this stuff, here to help.

Offline trueblue

  • A person who has had many interesting experiences, some of which are true, is known as an
  • Old Timer
  • ******
  • Posts: 3,124
Re: Are valves matched to their seat?
« Reply #3 on: November 02, 2011, 05:17:35 AM »
Quote from: Rigid on November 01, 2011, 02:54:49 PM
If you are renewing the guides and cutting the seats, No.  If you are only lapping the valves, yes.
+1
Logged
1979 CB650Z
Nothing can be idiot proofed, the world keeps producing better idiots.
Electronic Guages for your SOHC 4

Offline Scott S

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 8,232
Re: Are valves matched to their seat?
« Reply #4 on: November 02, 2011, 05:30:12 AM »
 What about springs and keepers? I'll probably get individual baggies and keep everything together the way it came out, but just curious about the springs.
Logged
'71 CB500 K0
'17 Triumph Street Scrambler
'81 Yamaha XS650

Offline tango911

  • Expert
  • ****
  • Posts: 1,012
Re: Are valves matched to their seat?
« Reply #5 on: November 02, 2011, 06:04:53 AM »
Quote from: Scott S on November 02, 2011, 05:30:12 AM
What about springs and keepers? I'll probably get individual baggies and keep everything together the way it came out, but just curious about the springs.

I did just that.  I kept the valves and springs etc... in separate baggies and labeled them 1-4. 
Logged
CURRENT STABLE:
1969 Honda Dream 305 (black)
1974 Mach III kawi 500 smoker
K2 (project)
K2 Original fixer up
K0 original fixer up
2006 CRF250R

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,275
  • Ride like you're invisible
Re: Are valves matched to their seat?
« Reply #6 on: November 02, 2011, 06:40:01 AM »
Not necessary with the springs but I always use the baggie method to keep everything ordered-same with carb rebuilds...Larry
Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Are valves matched to their seat?
« Reply #7 on: November 02, 2011, 06:56:09 AM »
But...if you're really anal... get a spring gauge and check that they are all of similar strength.

Naw... don't worry about it.   :)
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline Rigid

  • She likes a
  • Expert
  • ****
  • Posts: 821
  • Speak from personal experience, or don't
    • KingCustomCycles
Re: Are valves matched to their seat?
« Reply #8 on: November 02, 2011, 07:56:53 AM »
Valves stretch in length, springs lose their strength, where does it end?
Logged
36 years of this stuff, here to help.

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Are valves matched to their seat?
« Reply #9 on: November 02, 2011, 08:06:53 AM »
Quote from: Rigid on November 02, 2011, 07:56:53 AM
Valves stretch in length, springs lose their strength, where does it end?
Can a valve actually stretch?  I can see where the notch holding the keepers could wear, causing the appearance of stretch by looking at the spring. I can see the seat settling causing the valve to rise closing the lash.

Anyway, live and learn.  :)
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline Rigid

  • She likes a
  • Expert
  • ****
  • Posts: 821
  • Speak from personal experience, or don't
    • KingCustomCycles
Re: Are valves matched to their seat?
« Reply #10 on: November 02, 2011, 08:27:12 AM »
Quote from: MCRider on November 02, 2011, 08:06:53 AM
Quote from: Rigid on November 02, 2011, 07:56:53 AM
Valves stretch in length, springs lose their strength, where does it end?
Can a valve actually stretch?  I can see where the notch holding the keepers could wear, causing the appearance of stretch by looking at the spring. I can see the seat settling causing the valve to rise closing the lash.

Anyway, live and learn.  :)

Yeah, Lycoming actually sells a contour guage to check their valves for stretch.  It fits between the stem and the top of the valve head.  I have not seen one for any other valves but it makes sense with the recurring tension and temperature variations that the valve would eventually get longer.
Logged
36 years of this stuff, here to help.

Offline the technological J

  • Master
  • *****
  • Posts: 2,490
  • deliciouso!
Re: Are valves matched to their seat?
« Reply #11 on: November 02, 2011, 08:52:40 AM »
i had a peice of cardboard with 8 holes(two rows of 4) labeled 1-4 and in and ex and then it was easy to lap them and put them back as well as clean the carbon off em or polish them
Logged
70 KO...sold to fund the ST http://forums.sohc4.net/index.php?topic=88800.0(Alpha)
74 Kaw 250 Enduro http://forums.sohc4.net/index.php?topic=124278.0
K4 added to collection! http://forums.sohc4.net/index.php?topic=104784.0
78 750K... http://forums.sohc4.net/index.php?topic=60257.0 (Omega)sold to fund the K4
94 ST1100..Gone
72 750 K2 Stay tuned!

Offline Scott S

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 8,232
Re: Are valves matched to their seat?
« Reply #12 on: November 17, 2011, 07:40:03 AM »
 Is there a trick or an easy way to disassemble the head at home if I don't have a valve spring compressor tool?
Logged
'71 CB500 K0
'17 Triumph Street Scrambler
'81 Yamaha XS650

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Are valves matched to their seat?
« Reply #13 on: November 17, 2011, 08:24:29 AM »
Quote from: Scott S on November 17, 2011, 07:40:03 AM
Is there a trick or an easy way to disassemble the head at home if I don't have a valve spring compressor tool?
You can get (borrow) a spring compressor from the local auto parts store, usually for free. The smallest autoi size may still be a bit large for you, but it can done.

Good VSC kits are $40-$60.

http://www.amazon.com/MOTORCYCLE-DIRTBIKE-VALVE-SPRING-COMPRESSOR/dp/B004NV21YA

I'd spend a little more than this myself. But if its a one timer... resell on ebay.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline the technological J

  • Master
  • *****
  • Posts: 2,490
  • deliciouso!
Re: Are valves matched to their seat?
« Reply #14 on: November 17, 2011, 08:56:02 PM »
if you know a welder you could have him make you something out of a c clamp.... but for dissasembly i have put a large socket on them and smacked the with a hammer... it works but you def need a valve spring compressor for reassembly
Logged
70 KO...sold to fund the ST http://forums.sohc4.net/index.php?topic=88800.0(Alpha)
74 Kaw 250 Enduro http://forums.sohc4.net/index.php?topic=124278.0
K4 added to collection! http://forums.sohc4.net/index.php?topic=104784.0
78 750K... http://forums.sohc4.net/index.php?topic=60257.0 (Omega)sold to fund the K4
94 ST1100..Gone
72 750 K2 Stay tuned!

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,019
  • WHAT?no gravy?
Re: Are valves matched to their seat?
« Reply #15 on: November 17, 2011, 10:04:45 PM »
with the socket whack method,stuff the combustion camber full of rag on the pair of valves you are removing,itll stop them from compressing down,watch those collets(keepers).
Logged

Offline Rigid

  • She likes a
  • Expert
  • ****
  • Posts: 821
  • Speak from personal experience, or don't
    • KingCustomCycles
Re: Are valves matched to their seat?
« Reply #16 on: November 18, 2011, 02:44:20 AM »
That explains the bent valves I removed ............ ::)  ................. buy the proper tool.
Logged
36 years of this stuff, here to help.

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,019
  • WHAT?no gravy?
Re: Are valves matched to their seat?
« Reply #17 on: November 18, 2011, 02:49:49 AM »
i dig that k,i mean rigid,,it takes a certain finesse,for one the socket has to clear the stem and seat on the retainer cleanly,and the blows have to have some knowledge behind them,blindly belting #$%* only results in tears,,lays waste to my favourite saying of "WHEN IN TROUBLE OR IN DOUBT,GET A BIGGER HAMMER OUT!"
Logged
Pages: [1]   Go Up
« previous next »