Author Topic: CO2 sprayer?  (Read 2518 times)

0 Members and 1 Guest are viewing this topic.

Offline orkid1989

  • Hot Shot
  • ***
  • Posts: 344
  • “Life is too important to be taken seriously.”
CO2 sprayer?
« on: November 02, 2011, 05:07:26 PM »
i was just browsing the internet and came across a CO2 intercooler sprayer

and got to thinking would this work on our bikes somehow? possibly mount it to a oil cooler or even possibly mount it to the front of the motor where the fins are? obviously it will need to be turned down quite a bit so the temp change isn't enough to harm the metal. just thought it might be a cool idea (no pun intended).
“Experience is the name every one gives to their mistakes.” Oscar Wilde

Offline orkid1989

  • Hot Shot
  • ***
  • Posts: 344
  • “Life is too important to be taken seriously.”
Re: CO2 sprayer?
« Reply #1 on: November 02, 2011, 05:29:56 PM »
also it might come in handy when sitting in traffic to cool the motor a few degrees to keep it happy when their isnt air flowing over it
“Experience is the name every one gives to their mistakes.” Oscar Wilde

Offline scunny

  • Old Timer
  • ******
  • Posts: 4,618
  • don't call me expert
Re: CO2 sprayer?
« Reply #2 on: November 02, 2011, 05:38:02 PM »
where are you going to carry the water or CO2 bottle ?
past-cb100,ts250,cb500,cb500,gs1000,gs650g.phillips traveller
present-CB 650 retro
            VTR1000F3
           XL250S riverbed rocket
           TS250[sold]
           TS185[sold]
           XL125S[sold]
           MT50 (white)
           MT50 (red)[sold]
           KN250/XS400 project
           XR/XL250 bitsa under construction
           SL100[sold]
           XL250R
           pedal(pub bike) leaks oil
my gallery http://gallery.sohc4.net/members/personal/scunny

Offline orkid1989

  • Hot Shot
  • ***
  • Posts: 344
  • “Life is too important to be taken seriously.”
Re: CO2 sprayer?
« Reply #3 on: November 02, 2011, 05:48:16 PM »
where are you going to carry the water or CO2 bottle ?
still working on that part. but i was thinking about using a small paintball tank such as a 4 oz which is 5" tall and 2" diameter (probably would need multiple)

or a 9 oz which is 10.5" tall and 2-1/8" diameter

obviously the system is not going to be large enough for a constant blast of CO2 but might be able to be during situations where the engine is hotter than normal such as heavy traffic or when racing
« Last Edit: November 02, 2011, 06:02:08 PM by orkid1989 »
“Experience is the name every one gives to their mistakes.” Oscar Wilde

Offline orkid1989

  • Hot Shot
  • ***
  • Posts: 344
  • “Life is too important to be taken seriously.”
Re: CO2 sprayer?
« Reply #4 on: November 02, 2011, 06:53:15 PM »
by cryo2's measurements a 4oz bottle should supply roughly 4.5 seconds of a continuous spray and the 9oz bottle should supply roughly 10 seconds of continuous spray. so wouldn't be an extreme amount of time but in short bursts I'm sure it could help the engine temp immensely especially in racing applications.
“Experience is the name every one gives to their mistakes.” Oscar Wilde

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: CO2 sprayer?
« Reply #5 on: November 02, 2011, 10:12:29 PM »
Hmmmmm, you could mount that behind one of tintops "anti pod" filters and squirt N2O instead of CO2.... :P
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline orkid1989

  • Hot Shot
  • ***
  • Posts: 344
  • “Life is too important to be taken seriously.”
Re: CO2 sprayer?
« Reply #6 on: November 02, 2011, 10:17:51 PM »
You mean put n2o in the intake. Unless im mistaken but I don't think that would help much with the motor temp. Would increase the hp though
“Experience is the name every one gives to their mistakes.” Oscar Wilde

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: CO2 sprayer?
« Reply #7 on: November 02, 2011, 11:18:39 PM »
Quote
Would increase the hp though

That was the plan.... ;D ;)
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: CO2 sprayer?
« Reply #8 on: November 03, 2011, 01:23:27 AM »
Ork, are you on them drugs again?  ;D ;D ;D ;D ;D ;D

Sam. ;)
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline orkid1989

  • Hot Shot
  • ***
  • Posts: 344
  • “Life is too important to be taken seriously.”
Re: CO2 sprayer?
« Reply #9 on: November 03, 2011, 09:04:28 AM »
Hahaha no just bored. What else am I supposed to do at work, work? Lol
“Experience is the name every one gives to their mistakes.” Oscar Wilde

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: CO2 sprayer?
« Reply #10 on: November 03, 2011, 09:11:05 AM »
 ;D ;D ;D ;D ;D ;D ;D ;D
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline orkid1989

  • Hot Shot
  • ***
  • Posts: 344
  • “Life is too important to be taken seriously.”
Re: CO2 sprayer?
« Reply #11 on: November 03, 2011, 04:11:42 PM »
o well was just a thought. has anyone done anything with liquid cooling one of these?
“Experience is the name every one gives to their mistakes.” Oscar Wilde

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: CO2 sprayer?
« Reply #12 on: November 03, 2011, 04:18:15 PM »
I saw some milky liquid being sprayed on the billet blocks that were being made for Mike Reick ;D ;D ;D ;D

Sam. ;)
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline orkid1989

  • Hot Shot
  • ***
  • Posts: 344
  • “Life is too important to be taken seriously.”
Re: CO2 sprayer?
« Reply #13 on: November 03, 2011, 04:21:26 PM »
I saw some milky liquid being sprayed on the billet blocks that were being made for Mike Reick ;D ;D ;D ;D

Sam. ;)
that must be his secret ingredient lol
“Experience is the name every one gives to their mistakes.” Oscar Wilde