Author Topic: New Cafe project. To infinity and Beyond........ALMOST DONE! (Read 5320 times)

c1111toro · « **Reply #25 on:** December 08, 2011, 04:03:50 AM »

Thanks,the next challenge is the wiring. The project I bought came with the CycleX Power Arc setup. Also, I'm going to run the Grip Ace setup on my handlebars to get rid of all the hand switches.I like Exile Cycles stuff, and they carry their grips for 7/8 bars and sell them already machined for the Grip Ace system. Does anyone have any suggestions for an aftermarket clutch perch and throttle tube? Preferably something cool looking, maybe even for motocross bikes. I've been looking, but I can only find clutch perches but no matching throttle setup. I going to use the stock brake master cylinder.

c1111toro · « **Reply #26 on:** January 04, 2012, 03:51:52 PM »

Waiting on paint, the wiring is coming along.

c1111toro · « **Reply #27 on:** January 22, 2012, 03:59:00 PM »

Update. Got the wiring pretty much licked. Still waiting on paint. Here are some updated pics with the Grip Ace setup. I like the way the bars turned out with no switches....

c1111toro · « **Reply #28 on:** January 22, 2012, 03:59:55 PM »

More pics.

c1111toro · « **Reply #29 on:** January 22, 2012, 04:00:44 PM »

c1111toro · « **Reply #30 on:** January 22, 2012, 04:01:40 PM »

And again.

c1111toro · « **Reply #31 on:** January 22, 2012, 04:02:39 PM »

A few more.

spammasher · « **Reply #32 on:** January 23, 2012, 03:41:58 AM »

Wow your bike is going to be magic when it's finished, well done. Don.

c1111toro · « **Reply #33 on:** January 23, 2012, 03:55:49 AM »

Thanks, I can't wait to hear it with Carpys exhaust.

lucky · « **Reply #34 on:** January 26, 2012, 12:31:14 PM »

Quote from: c1111toro on December 04, 2011, 07:09:36 AM

The devoted couple almost ready to renew their vows...

You DID lower the frame onto the engine Right???

c1111toro · « **Reply #35 on:** January 26, 2012, 02:46:11 PM »

No I did it OLD SCHOOL. A friend helped me.

the technological J · « **Reply #36 on:** January 26, 2012, 11:56:00 PM »

c1111toro · « **Reply #37 on:** February 19, 2012, 01:04:02 PM »

Update! Wiring is done. Most of the paint is done, but it is going to redone I was not happy with quality of the job. Bike is running. Got the velocity stacks. Sync'd the carbs. I'm taking the bike tomorrow to get the seat done and then it's back to paint to do the seat and redo the rest. Here are some pics.

c1111toro · « **Reply #38 on:** February 19, 2012, 01:04:53 PM »

some more pics...

c1111toro · « **Reply #39 on:** February 19, 2012, 01:05:45 PM »

pics....

c1111toro · « **Reply #40 on:** February 19, 2012, 01:10:53 PM »

I forgot to mention, I bought some Joker Machine parts. You can see the gas cap and the axle adjusters and brake rod nut. Not pictured is the horn bracket. I'm very pleased with quality of the Joker Machine parts. Next up is to get some repop gauges from CycleX. That will finish it off. I also contacted Micheal Woulfe of Woulfe leathers www.rockerjackets.com to do a HONDA treatment on a vintage Cafe style leather jacket that I picked up for $20.00 at a swap meet.

srbakker · « **Reply #41 on:** February 23, 2012, 04:47:19 PM »

Beautiful mate! I know what you mean about the JM stuff - it's pretty nice quality and great for guys like me who are better with a screwdriver then with a milling machine or welder.

c1111toro · « **Reply #42 on:** April 03, 2012, 07:59:09 AM »

Almost there. Can't make up my mind about the pin striping. Here are the most recent pics....

c1111toro · « **Reply #43 on:** April 03, 2012, 08:11:45 AM »

A couple more. New Front fender.

c1111toro · « **Reply #44 on:** April 03, 2012, 08:12:57 AM »

Last few....

tweakin · « **Reply #45 on:** April 03, 2012, 08:46:20 AM »

Looks good, enjoy it!

c1111toro · « **Reply #46 on:** April 03, 2012, 10:31:41 AM »

Thanks. I can't make up my mind about the pin striping. I think I'll kick it around for little while until I decide.

the technological J · « **Reply #47 on:** April 03, 2012, 07:26:46 PM »

what color? white, gold, pearl stripes might be cool... black pearl(arghh)?

c1111toro · « **Reply #48 on:** April 04, 2012, 05:02:14 AM »

I was thinking silver flake to match the frame.

kerryb · « **Reply #49 on:** April 04, 2012, 06:29:22 AM »

Really nice results there. Silver pin stripe would tie it all together nicely.

News:

Author Topic: New Cafe project. To infinity and Beyond........ALMOST DONE! (Read 5320 times)