Topic: 4 into 1 exhaust for 350F who makes one?

[veloracermike]

Looking for a 4 into 1 exhaust for my 350f Cafe project.  I checked the Mac and Kerker sites but they had nothing listed.

[Bodi]

A 400-4 exhaust will fit with a bit of trickiness, the port dimensions are the same and clearance under the engine is pretty similar but it might interfere with the rear footpegs and you might have to fabricate a stop bar for the centre stand to hit; the 400F muffler mount is where most 4-1 pipes attach theirs... and it doesn't exist on a 250.

[tomkimberly]

http://www.motorcycle-exhaust.com/product/PU0010401.html


Tom

[DavePhipps]

http://www.wemoto.com/parts/picture/MV-H_19_BC/

http://www.ebay.com/itm/NOS-Honda-CB350F-Four-Exhaust-Pipe-SET-by-MCM-chopper-350-f-/160461036935?hash=item255c391d87&item=160461036935&pt=Motorcycles_Parts_Accessories&vxp=mtr

or roll your own(beyond my skillset)
http://www.coneeng.com/

[veloracermike]

Thanks guys!  The Mac is perfect!.

[Owned]

A 400-4 exhaust will fit with a bit of trickiness, the port dimensions are the same and clearance under the engine is pretty similar but it might interfere with the rear footpegs and you might have to fabricate a stop bar for the centre stand to hit; the 400F muffler mount is where most 4-1 pipes attach theirs... and it doesn't exist on a 250.

The 400F exhaust on a 350F frame works GREAT (yes, that's a 400F engine).  See pic below: