Author Topic: Benefit Auction (Read 40083 times)

cbr954 · « **Reply #150 on:** January 18, 2012, 07:47:11 PM »

I'll start at $150

scottly · « **Reply #151 on:** January 18, 2012, 08:00:14 PM »

Bill, it looks like that is a dual-point distributor? (for those not familiar with automotive type distributors, dual-point systems were used in performance applications to increase the dwell, and thus the coil saturation time.)

scottly · « **Reply #152 on:** January 18, 2012, 08:47:28 PM »

I bid $160 on the RC/Mallory ignition.

BLUE71TURBO · « **Reply #153 on:** January 18, 2012, 09:03:03 PM »

Quote from: scottly on January 18, 2012, 05:35:58 PM

Bill, how about if you set a minimum bid of $150, and include shipping within the US (shouldn't cost more than $11-15 flat rate). Worst case would be only $15 to the fund, but I think there will be some serious bidding on this one! More pics, please. Jon, any info in your RC catalogs about the VW style distributor?

I guess yer talking to me ? In the R.C. catalogs there is no spec's on the distributor. But i have owned alot of VW's in my years, stock and high performance. Any distributor or magneto that will fit a type 1 VW engine
will fit the R.C. angle drive. A aftermarket electronic ignition for the VW distributor would be the best. Screw that dual point setup. Here's what i'm talking about.... http://www.thesamba.com/vw/classifieds/detail.php?id=397477 I'm posting all the info that came with the R.C. Engineering angle drive setup.....

With the old Mallory distributor, i 'm pretty sure you can update it to a better electronic setup like pertronix
and others out there.

Here's one for a kz900/1000 with a Vertex magneto........

Here is a Mallory Super Mag III I picked up. 4 AMPS OF POWER !! These new are $ 1,000.oo !!

Found it on a VW website for $ 150.00

Here is a 009 VW distributor with the electronic conversion installed . The coil to use with this would be a Bosch " BLUE COIL " .

Good luck to whom ever wins this very rare piece of R.C. Engineering hardware !!!

scottly · « **Reply #154 on:** January 18, 2012, 09:06:53 PM »

Thanks Jon!

BLUE71TURBO · « **Reply #155 on:** January 18, 2012, 09:19:42 PM »

Your most welcome brother.

Terry in Australia · « **Reply #156 on:** January 18, 2012, 11:38:43 PM »

Woohoo! I've always wanted one of them, so I'll bid $250.00 on the RC dizzy!

Sam Green Racing · « **Reply #157 on:** January 19, 2012, 04:27:59 AM »

Your cam money is in the fund Terry, thanks for bidding and a big thanks to rbmgf7 for donating the cam.
Your joint efforts have pushed the running total to over £1,500 GBP, well done guys.

Sam.

mrjack55 · « **Reply #158 on:** January 19, 2012, 02:11:40 PM »

Quote from: mrjack55 on January 17, 2012, 05:08:20 PM

Quote from: scottly on January 17, 2012, 04:46:01 PM
Quote from: SamCB750A on January 17, 2012, 02:23:25 PM
Thanks Jack. Still a few things on offer, like CB750A camshaft and Freddy the cat comic.
What happened to the Relay patch Scott /

Sam.
The patch went to Mickey6, Sam. He confirmed delivery last weekend.
Jack, the rear-set plates were mailed today via priority mail; you should get them by the end of the week. Thanks!

Excellent!

They're heeeeeeeere!

Thanks Scott.

Sam Green Racing · « **Reply #159 on:** January 19, 2012, 03:19:19 PM »

Congrats Jack, we need pictures when they are on your bike or you never bought them

Sam.

srbakker · « **Reply #160 on:** January 19, 2012, 03:44:02 PM »

Any info on the Norris R grind cam?

Bill/BentON Racing · « **Reply #161 on:** January 19, 2012, 04:44:38 PM »

Sorry,my mistake,it's not for sale,but it did make me think time to look in cam boxes...batcave again! ;)Bill

BLUE71TURBO · « **Reply #162 on:** January 21, 2012, 12:43:47 PM »

So what's going on with R.C. Angle drive setup ? When does the auction end ?

Bill/BentON Racing · « **Reply #163 on:** January 21, 2012, 03:29:49 PM »

At midnight EST last day of January!Bid Bid!!!

Bill

BLUE71TURBO · « **Reply #164 on:** January 21, 2012, 07:58:49 PM »

I would bid on it but i have a magneto already on my turbo bike. I also have an R.C. Angle drive for a Kawi 1000. Besides i can't bid against Terry. He's never had one of these and i can't bring myself to out bid him and break his old heart !

Bill/BentON Racing · « **Reply #165 on:** January 21, 2012, 08:23:50 PM »

Understandable,besides he's doing a good job on updates etc. While we're at it a shout out to DHAll,member we met @ Rockingham,real pretty '76 red CB750,got your check Dwight,Sam add another C note! Thanks DHall,Bill

Terry in Australia · « **Reply #166 on:** January 22, 2012, 01:14:09 AM »

Quote from: BLUE71TURBO on January 21, 2012, 07:58:49 PM

I would bid on it but i have a magneto already on my turbo bike. I also have an R.C. Angle drive for a Kawi 1000. Besides i can't bid against Terry. He's never had one of these and i can't bring myself to out bid him and break his old heart !

Ha ha, thanks Jon, I appreciate that mate, I really do want one for my "Cobra" engine, so I hope everyone else will be just as kind as you, but I'm prepared for battle if necessary, it's all for a very good cause! Cheers, Terry.

Sam Green Racing · « **Reply #167 on:** January 23, 2012, 02:48:41 AM »

You will have to fight for it Terry, I'll up it to $250.01

only joking.

Be nice people, Terry has worked his socks of for this cause and he deserves to get a break here.

He realy does want this mag offered by Billy so if anyone out bids him, you'll have me to contend with.

I HAVE THE POWER.

Sam.

Bill/BentON Racing · « **Reply #168 on:** January 23, 2012, 05:31:35 AM »

DICKtator!!!!Bill

Sam Green Racing · « **Reply #169 on:** January 23, 2012, 05:37:02 AM »

Don't you be calling me a Dick.

Sam.

Terry in Australia · « **Reply #170 on:** January 23, 2012, 12:24:40 PM »

Quote from: SamCR750 on January 23, 2012, 05:37:02 AM

Don't you be calling me a Dick.

Sam.

Or a "Tater", ha ha! 250 bucks is not a lot for that dizzy though, so I'm gonna outbid myself and up my bid to $350.00. Cheers, Terry.

Sam Green Racing · « **Reply #171 on:** January 23, 2012, 01:01:27 PM »

Who was it that said Australia was full of deported British criminals ?

I'm going to ask the Queen to Knight you Terry

. You "SIR" are a REAL gentleman.

Sam.

Bill/BentON Racing · « **Reply #172 on:** January 23, 2012, 03:36:43 PM »

Whoa....very classy move young man!!!

I may have to wipe the dust off!!!

Bill

Sam Green Racing · « **Reply #173 on:** January 23, 2012, 04:06:41 PM »

Ya need to tell him that the leads (wires) are yellow plastic and not solid gold Billy.

He is one cool dude mate, along with you for putting it up at a very modest price.

Sam.

Terry in Australia · « **Reply #174 on:** January 23, 2012, 10:56:45 PM »

Quote from: SamCR750 on January 23, 2012, 01:01:27 PM

Who was it that said Australia was full of deported British criminals ?

Hey I object to that inference Sammy, my ancestors were Irish Criminals!

Hey that Knighthoood sounds good, I think you should get the Queen to offer up a free knighthood to auction off, I think "Sir Terence of Mill Park" has rather a nice ring to it? Cheers, Terry.

News:

Author Topic: Benefit Auction (Read 40083 times)

mrjack55