Topic: 1975 CB750F Main Stand Assembly

[RodSOHC750]

The foot on my main stand in the stowed position interferes with the drive chain. Is there a stop that limits the up travel so it doesn’t contact the chain?

[Jessamine]

I have the same bike. I believe there is a rubber bumper on the underside of the frame towards the right side which prevents it returning too far. Can snap a pic this weekend if you need.

Sent from my ONEPLUS A3000 using Tapatalk

[RodSOHC750]

Yes.  That would be helpful.  Here are a few pictures of mine.  I just removed the stand to clean and lube the pin. I didn’t see any signs of bending. 

[RodSOHC750]

Just checked the parts fiche.  It shows a rubber bumper on the muffler.  I’ll check my muffler which is not been installed. 

[Jerry Rxman Griffin aka MuthaF'er]

Yep, that's it, at least on a stock system.

[754]

The fix is to make a bracket , it fits between rear peg and frame.
 Make it so the stand stops just under the chain.
 The stock F and K had bumpers on the pipes to stop it.

[Jessamine]

Here ya go! Also a 75 CB750F

Sent from my ONEPLUS A3000 using Tapatalk

[RodSOHC750]

Thanks for the pictures.  Helped a lot.  I know what to do now.