Author Topic: Magpie's CB750F DOHC Project (Read 16870 times)

Prospect · « **Reply #50 on:** April 21, 2012, 05:20:58 PM »

Wow! I can't believe that was free! I too am not fond of the DOHC's but that looks great! It's amazing what one can do with a little mechanical knowledge, will, research and persistence.

Also, I went to get some pine sol and realized there are many different kinds. Did you just use regular type or ?? I got a nice very low mileage k3 engine (stuck) and a set of carbs that I'll dig into soon plus my cb350f carbs that need cleaning.

Magpie · « **Reply #51 on:** April 21, 2012, 06:47:18 PM »

Thanks! Yes, just the regular Pine Sol although I got the lemon scent and it turned my stomach after awhile. it's a very strong smell but works very well. Cheers, Cliff.

Magpie · « **Reply #52 on:** April 21, 2012, 08:09:02 PM »

I too am not fond of the DOHC's but that looks great!
I know what you mean. These came out when I was "away" from motorcycles, for about 25 years. I didn't know much about them and my focus was on the SOHC4. I had in mind to build a rider, one I could park somewhere and not worry to much about it. Park a good SOHC4 and it's hard to leave it alone, at least for me. The theory with this one is that I won't get stopped every 5' with questions about it and people wanting to sit on it and touch it. It's starting to look good so maybe that theory is done.
This bike came along at the right time and right price. My K0 project is stalled to a lack of large funds to finish it - paint + pipes = $2500 or so. The Goldwing is not as sporty as I would like for short blasts around town. We'll see if it works.
Cheers, Cliff.

grcamna2 · « **Reply #53 on:** April 22, 2012, 08:53:10 AM »

Quote from: Greggo on April 09, 2012, 08:33:04 AM

Quote from: Magpie on April 07, 2012, 07:18:54 AM
One however however, the Benly is getting impatient for love too.
Cliff.

I think you'll like how simple that Benly is after this one

How's the Benly coming?..I know you must have done a little to it so far; It'll be a Gem when it's complete

Magpie · « **Reply #54 on:** April 22, 2012, 09:07:52 AM »

It's just sitting there. I did repair the flat tire so it's easier to roll around now. There's a large swap meet next weekend and I'll see if I can find any treasures there for it. I really need a set of handlebars for it. Cheers, Cliff.

Greggo · « **Reply #55 on:** April 22, 2012, 03:38:49 PM »

I think my parts bike has a set of bars on it...may need to be re chromed, but they are originals. I'll check Tuesday for you.

Magpie · « **Reply #56 on:** April 22, 2012, 09:42:10 PM »

Sounds good, thanks! Cliff.

Magpie · « **Reply #57 on:** April 22, 2012, 09:56:41 PM »

Done for now. Cliff.

grcamna2 · « **Reply #58 on:** April 22, 2012, 11:06:47 PM »

Cliff,
Did you get a registration plate on her and go for a ride yet? or are you going for that "One for All" multi bike Collectors deal that you folks up there can get in B.C. I heard you earlier about that..I think it was part of this thread;do you have to get this CB750F inspected for "true to stock" condition before they'll issue you that special collectors license plate for a number of bikes ? That seems like such a Great deal for you up there in B.C.

Magpie · « **Reply #59 on:** April 23, 2012, 07:31:46 AM »

I haven't got the collector status yet. I'll need to do more work to it but I think I'll send in the application and pictures anyway to see what happens. It's cheap insurance especially if you have several bikes. One licence plate and you move it bike to bike. It has to be true to stock or period correct. You can send in a picture of what you're thinking of using, such as the Mac exhaust system, and they will tell you if it's acceptable or not. They do have some flexibility but they don't want to see dents, scratches, rust etc. I think I'll put short term regular insurance on this one for the time being. It will be a go for coffee, lunch or solo clear the cobwebs bike. I've been having a good time working on it and thinking of a down to the frame job in the fall when the weather turns on us. I won't have to do a lot of parts hunting as it's fairly complete. Cliff.

grcamna2 · « **Reply #60 on:** April 23, 2012, 07:47:38 AM »

Cliff,
I doubt the inspectors that look at the 2 into 1 MAC exhaust would be able to notice the difference between the stock exhaust and that MAC...at least from the side view

.

Magpie · « **Reply #61 on:** April 23, 2012, 08:32:30 AM »

i did sent them pics of a stock exhaust system and the Mac and the were ok with them. I waited for that before I bought them. there seems to be a bit of flexibility from some inspectors and not others at the approving office. Cliff.

grcamna2 · « **Reply #62 on:** April 23, 2012, 08:44:07 AM »

How old does a bike(or car)need to be before it'll be considered "collectable" under the Department of Motor Vehicle standards ?

Magpie · « **Reply #63 on:** April 23, 2012, 08:54:25 AM »

It has to be 25 years old. I'll try to pm you the stuff from the insurance corp. about it . Cliff

grcamna2 · « **Reply #64 on:** April 23, 2012, 04:16:31 PM »

Cliff,
I read the stuff/info from the ins. co about "collectors" vehicles;does you're CB750F qualify for the 25 year old status yet? I would think it would qualify for all the other rules & regulations that I read about considering what nice Original condition it's in; maybe the real date of manufacture on the i.d. tag on the frame is early enough for it to qualify..

Magpie · « **Reply #65 on:** April 23, 2012, 07:48:37 PM »

It's a 1980 so it's in!

Cliff.

grcamna2 · « **Reply #66 on:** April 23, 2012, 07:51:38 PM »

That's Great ! Do you have a projected date for it's registration plate and...first long Ride ? !

Magpie · « **Reply #67 on:** April 23, 2012, 10:54:05 PM »

Not yet. Cliff.

Greggo · « **Reply #68 on:** April 24, 2012, 07:07:16 PM »

Ooooooh Cliff!? Guess what I found today dangling off my CA95 parts bike?

Magpie · « **Reply #69 on:** April 24, 2012, 10:07:44 PM »

Let me think...still thinking...handlebars?

Cliff.

Greggo · « **Reply #70 on:** April 24, 2012, 11:03:25 PM »

Winner Winner! Chicken Dinner!

They're not so pretty. I'll snap a pic tomorrow for you, and you can decide if they're worth the shipping cost

Magpie · « **Reply #71 on:** April 25, 2012, 05:56:46 AM »

Sounds good!
Had a good look at the chain on the F - it's toast! New one coming. Cliff.

Magpie · « **Reply #72 on:** May 01, 2012, 06:16:29 PM »

About done for now. It's running nicely, new chain installed, a full set of working signal lights and the carb overflow drain tubes installed too. Now to put the pics in for the Collector Vehicle plates. Cliff.

hoodellyhoo · « **Reply #73 on:** May 01, 2012, 06:56:52 PM »

so how does the bike compare to a sohc? I know the period magazine tests I have raved about the bike.

grcamna2 · « **Reply #74 on:** May 01, 2012, 07:49:19 PM »

Cliff, all that work you did really payed off..She's Really clean !

News:

Author Topic: Magpie's CB750F DOHC Project (Read 16870 times)