« previous next »
Pages: [1]   Go Down

Author Topic: CB750K four with stuck engine - rebuild  (Read 1340 times)

0 Members and 1 Guest are viewing this topic.

Offline jester

  • Full Member
  • *
  • Posts: 37
CB750K four with stuck engine - rebuild
« on: April 28, 2012, 01:08:03 PM »
Hey all, Today I'm starting my first ever rebuild of a cb750. I just bought it, but the engine suddenly got stuck on the highway ramp. Good motivation to do a rebuild it cuz i gotta take it apart anyway. no? Don't know why it got stuck. oil level was fine, no apparent overheating. Does anyone know what else could have caused the engine to get stuck? the transmission is fine,  but kick starter doesn't move an inch.
« Last Edit: April 28, 2012, 01:11:49 PM by jester »
Logged

Offline cmonSTART

  • Hot Shot
  • ***
  • Posts: 285
Re: CB750K four with stuck engine - rebuild
« Reply #1 on: April 28, 2012, 05:02:04 PM »
That can't be good, though it must have been exciting! 
Logged
1981 GL1100 Interstate
1978 CB750F Project

Offline jester

  • Full Member
  • *
  • Posts: 37
Re: CB750K four with stuck engine - rebuild
« Reply #2 on: April 28, 2012, 09:28:13 PM »
yeah, happened at 40mph... luckily i was out of the curb and immediately had the response to clutch.
So... progress; I unhooked all the cables from the engine today, got the air filter out, and spent 3 hours trying to get the oil filter housing off... The bolt was rusted badly and I screwed it up trying to take it off. I'm not the first-one, I noticed ( http://forums.sohc4.net/index.php?topic=78089.0 ) I think I'm gonna saw the hex nut into a rectangle and use one of those self locking pliers to try and turn it. I also put some liquid wrench on it today and hit it a couple of times with a hammer. No luck though.
Logged

Offline jester

  • Full Member
  • *
  • Posts: 37
Re: CB750K four with stuck engine - rebuild
« Reply #3 on: April 28, 2012, 10:21:16 PM »
could the engine hydrolock during driving?
Logged
Pages: [1]   Go Up
« previous next »