« previous next »
Pages: [1]   Go Down

Author Topic: Bad day for a 754 rod bearing..  (Read 736 times)

0 Members and 2 Guests are viewing this topic.

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Bad day for a 754 rod bearing..
« on: December 02, 2012, 09:51:52 PM »
 Bet this sounded bad

 :o >:(

Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,030
  • CB500 Number 1000036
Re: Bad day for a 754 rod bearing..
« Reply #1 on: December 02, 2012, 11:28:44 PM »
OUCH! New crank, rods and cases?
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Bad day for a 754 rod bearing..
« Reply #2 on: December 02, 2012, 11:49:42 PM »
 The. Two pieces on right are a piece of Web from the case, a very slight bulge at the mating surfaces..not real bad. Crank was imprinted with the rodbolt threads. Came out of an early motor, serial number in the 10k range
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way
Pages: [1]   Go Up
« previous next »